s14 main harness auto vs manual - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Anhell_ito · 11-10-2013, 08:16 PM

So a while ago my tire ate through some of the wires under the wire well before I got to relocate them and fried some stuff. tried searching but I couldn't figure out which pins would have to be repinned on an auto harness to allow me to run it in place of my manual one. any help?

Anhell_ito · 11-10-2013, 08:19 PM

I moved some around and repined some to what I believed were the correct ones and the car starts and drives. but im having a cold start issue and I remember moving an orange wire around which I believe might be the culprit. so I would like a diagram to verify everything is matched up like it should but I cant seem to find one.

11-10-2013, 08:16 PM	#1
Anhell_ito Zilvia Junkie Join Date: Dec 2012 Location: nunya Age: 32 Posts: 369 Trader Rating: (0) Feedback Score: 0 reviews	s14 main harness auto vs manual So a while ago my tire ate through some of the wires under the wire well before I got to relocate them and fried some stuff. tried searching but I couldn't figure out which pins would have to be repinned on an auto harness to allow me to run it in place of my manual one. any help?

11-10-2013, 08:19 PM	#2
Anhell_ito Zilvia Junkie Join Date: Dec 2012 Location: nunya Age: 32 Posts: 369 Trader Rating: (0) Feedback Score: 0 reviews	I moved some around and repined some to what I believed were the correct ones and the car starts and drives. but im having a cold start issue and I remember moving an orange wire around which I believe might be the culprit. so I would like a diagram to verify everything is matched up like it should but I cant seem to find one.