PBM Comps NOW LOW AT ALL WTF?! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jeremyuhh · 03-23-2013, 02:13 AM

UPDATE: i removed BOTH collars and added about 1 turn of preload this morning on each front coilover and i am no where near how i was with my stance gr+ pro (pictured below on my red coupe) im at 0 camber and i dont even rub. yes, no rubbing at all. i thought PBMs had "FAMOUS Super low ride height ability" as quoted straight off their site.

tons of preload to where i need frim grip with 2 hands and the wheel off to turn the spring
both collars removed
completely maxed out
0 fucking camber
not even covering or touching tire.
and i can drive with no rubbing issues. my sidewalls should be demolished by now
Before it settled:

After it settled:

when i had both collars on, 0 preload, maxed out low. nasty gap:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

i have pbm comp coils, maxed out fronts, collars still there, and im not even touching tire. theres at least half an inch of wheel gap still. i thought PBMs were supposed to go suuuuper low without removing collars.

specs:
pbm comp coils. 10k front spring rate. 0 preload. maxed out. 2 collars on.
17x9.5 +15 battles on 205/40R17.
0 camber & 0.9 toe from running stock wheels

wtf is going on?

i had stance gr+ pro with 1 collar removed, same wheel and tire size, except +12 offset and they went alot lower:

03-23-2013, 02:13 AM	#1
jeremyuhh Zilvia FREAK! Join Date: Jan 2010 Location: earth Posts: 1,419 Trader Rating: (51) Feedback Score: 51 reviews	PBM Comps NOT LOW AT ALL WTF?! UPDATE: i removed BOTH collars and added about 1 turn of preload this morning on each front coilover and i am no where near how i was with my stance gr+ pro (pictured below on my red coupe) im at 0 camber and i dont even rub. yes, no rubbing at all. i thought PBMs had "FAMOUS Super low ride height ability" as quoted straight off their site. tons of preload to where i need frim grip with 2 hands and the wheel off to turn the spring both collars removed completely maxed out 0 fucking camber not even covering or touching tire. and i can drive with no rubbing issues. my sidewalls should be demolished by now Before it settled: After it settled: when i had both collars on, 0 preload, maxed out low. nasty gap: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- i have pbm comp coils, maxed out fronts, collars still there, and im not even touching tire. theres at least half an inch of wheel gap still. i thought PBMs were supposed to go suuuuper low without removing collars. specs: pbm comp coils. 10k front spring rate. 0 preload. maxed out. 2 collars on. 17x9.5 +15 battles on 205/40R17. 0 camber & 0.9 toe from running stock wheels wtf is going on? i had stance gr+ pro with 1 collar removed, same wheel and tire size, except +12 offset and they went alot lower: Last edited by jeremyuhh; 03-25-2013 at 02:25 AM..