NC 1jz swapped Sc300 Part out. GReddy, Apexi, ACT, Blitz, Stern 19' wheels, Lots of part - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BNASTYs13 · 03-18-2014, 02:15 PM

Parting out my 1992 sc300 with 1jz swap. Car made 340whp at National speed several years ago. Swap has about 70k miles on it and still runs strong. The car is parted out now so do not ask if I will sell the whole car. I am not selling the shell complete. I am parting it out. Let me know what parts you want from it. I will pull anything you need off it.

complete 1jz swap engine with harness, ecu, turbos, sensors, manifolds, injectors, p/s pump, alternator, starter, a/c, custom intake, down pipe etc. Every but the transmission, flywheel, and clutch. The engine was pulled from a strong running car but has a burnt valve on cylinder number 2- 700 picked up. Will part out.

Test pipe- 40

Front mount intercooler kit with all piping and Blitz dual drive bov- 350

Apexi boost gauge- 50 (no harness for light)

Rear Lip and Side skirts- 180. One of the skirts needs a small repair.

Momo steering wheel with adapter- 120

Good battery- 40

Wheels are sold, suspension is sold, exhaust is sold. boost controller and safc are sold

Videos!!!!

http://www.youtube.com/watch?v=nmtfV...Mybjbw&index=5

http://www.youtube.com/watch?v=QE7Ox...dBgp8f--Mybjbw

BNASTYs13 · 03-19-2014, 09:47 PM

Bump I know some of you schassis guys can use some of these parts. Spread the word to SC friends

conrad_s13.5 · 03-20-2014, 09:21 AM

SAFC forsale too?

Boostin_AWD · 03-20-2014, 05:59 PM

Lmk if you'll part the flywheel and clutch.

BNASTYs13 · 03-20-2014, 10:49 PM

sorry safc is sold now. I do not want to part the clutch and fw yet. Also just did a leak down and number 2 cyl is low. I think it has a stuck valve since i can hear the air coming out of the exhaust manifold. I doubt it is bent since 1js are non interference motors.

I would be willing to sell the engine for pretty cheap. Perfect for a build.

bmitchell_ga · 03-21-2014, 02:45 AM

pm sent on boost controller

1jz s14 · 03-21-2014, 04:54 AM

Coilovers?

irocznissan · 03-21-2014, 11:17 AM

How's the interior

BNASTYs13 · 03-23-2014, 05:22 PM

interior is pretty bad what do you need?

Boost controller is now sold sorry

Coilovers sold sorry

Jdmfreak078 · 03-23-2014, 06:15 PM

How much for the engine ?

Sent from my iPhone using Tapatalk

BNASTYs13 · 03-24-2014, 10:38 PM

I would take 350 for the long block

BNASTYs13 · 03-26-2014, 02:14 PM

wheels are now sold and so is exhaust.

ORkouki · 03-26-2014, 08:37 PM

Do you have a r154 to 1jz bellhousing?

03-18-2014, 02:15 PM	#1
BNASTYs13 Zilvia Addict Join Date: Jul 2011 Location: NC Age: 37 Posts: 685 Trader Rating: (50) Feedback Score: 50 reviews	1jz swapped Sc300 Part out. GReddy, Apexi, ACT, Blitz, Stern 19' wheels, Lots of part Parting out my 1992 sc300 with 1jz swap. Car made 340whp at National speed several years ago. Swap has about 70k miles on it and still runs strong. The car is parted out now so do not ask if I will sell the whole car. I am not selling the shell complete. I am parting it out. Let me know what parts you want from it. I will pull anything you need off it. complete 1jz swap engine with harness, ecu, turbos, sensors, manifolds, injectors, p/s pump, alternator, starter, a/c, custom intake, down pipe etc. Every but the transmission, flywheel, and clutch. The engine was pulled from a strong running car but has a burnt valve on cylinder number 2- 700 picked up. Will part out. Test pipe- 40 Front mount intercooler kit with all piping and Blitz dual drive bov- 350 Apexi boost gauge- 50 (no harness for light) Rear Lip and Side skirts- 180. One of the skirts needs a small repair. Momo steering wheel with adapter- 120 Good battery- 40 Wheels are sold, suspension is sold, exhaust is sold. boost controller and safc are sold Videos!!!! http://www.youtube.com/watch?v=nmtfV...Mybjbw&index=5 http://www.youtube.com/watch?v=QE7Ox...dBgp8f--Mybjbw Last edited by BNASTYs13; 03-26-2014 at 02:32 PM..

03-20-2014, 09:21 AM	#3
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 37 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	SAFC forsale too? __________________ cONtRol FReAkS

03-23-2014, 06:15 PM	#10
Jdmfreak078 Leaky Injector Join Date: Feb 2014 Age: 55 Posts: 115 Trader Rating: (3) Feedback Score: 3 reviews	How much for the engine ? Sent from my iPhone using Tapatalk __________________ Using Tapatalk

03-19-2014, 09:47 PM	#2
BNASTYs13 Zilvia Addict Join Date: Jul 2011 Location: NC Age: 37 Posts: 685 Trader Rating: (50) Feedback Score: 50 reviews	Bump I know some of you schassis guys can use some of these parts. Spread the word to SC friends

03-20-2014, 05:59 PM	#4
Boostin_AWD Join Date: Jul 2013 Location: Utah Age: 34 Posts: 12 Trader Rating: (2) Feedback Score: 2 reviews	Lmk if you'll part the flywheel and clutch.

03-20-2014, 10:49 PM	#5
BNASTYs13 Zilvia Addict Join Date: Jul 2011 Location: NC Age: 37 Posts: 685 Trader Rating: (50) Feedback Score: 50 reviews	sorry safc is sold now. I do not want to part the clutch and fw yet. Also just did a leak down and number 2 cyl is low. I think it has a stuck valve since i can hear the air coming out of the exhaust manifold. I doubt it is bent since 1js are non interference motors. I would be willing to sell the engine for pretty cheap. Perfect for a build.

03-21-2014, 02:45 AM	#6
bmitchell_ga Zilvia Member Join Date: Dec 2008 Location: south ga Age: 42 Posts: 159 Trader Rating: (5) Feedback Score: 5 reviews	pm sent on boost controller

03-21-2014, 04:54 AM	#7
1jz s14 Join Date: Apr 2012 Location: Europe Age: 33 Posts: 49 Trader Rating: (1) Feedback Score: 1 reviews	Coilovers?

03-21-2014, 11:17 AM	#8
irocznissan Leaky Injector Join Date: May 2008 Location: nj Age: 37 Posts: 67 Trader Rating: (1) Feedback Score: 1 reviews	How's the interior

03-23-2014, 05:22 PM	#9
BNASTYs13 Zilvia Addict Join Date: Jul 2011 Location: NC Age: 37 Posts: 685 Trader Rating: (50) Feedback Score: 50 reviews	interior is pretty bad what do you need? Boost controller is now sold sorry Coilovers sold sorry

03-24-2014, 10:38 PM	#11
BNASTYs13 Zilvia Addict Join Date: Jul 2011 Location: NC Age: 37 Posts: 685 Trader Rating: (50) Feedback Score: 50 reviews	I would take 350 for the long block

03-26-2014, 02:14 PM	#12
BNASTYs13 Zilvia Addict Join Date: Jul 2011 Location: NC Age: 37 Posts: 685 Trader Rating: (50) Feedback Score: 50 reviews	wheels are now sold and so is exhaust.

03-26-2014, 08:37 PM	#13
ORkouki Join Date: Aug 2012 Location: oregon Posts: 37 Trader Rating: (1) Feedback Score: 1 reviews	Do you have a r154 to 1jz bellhousing?