This goes to all the wiring experts & people with enough knoledge with AAC IACV - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xpicer · 07-23-2008, 05:16 PM

Ok I did my sr swap about 2 years ago and always had small issues , and i worked them out little by little , now i finally decided to tuck away my harness , witch was done by me also , but now i found a problem that maybe some of have already worked out , now i used the fr sport guide . but when you have to wire the chassis sockets into the 240sx one , i know that almost no one cares or wires the 3rd small grey socket , and most people just leave it there ( i have seen enough harnesses to tell ) , but now i traced the cables so i could eliminate them from the harness but i realized that one of the wires ( blue and red )on the small grey socket goes to one of the pins of the idle motor , now in the guide it says to splice together black and blue and red wire , but does anyone have a diagram of the idle motor , circuit , i am wondering if this was the reason why i had a really crappy idle , please if anyone could chime in it would be apreciated and i will contact frsport and have them add that so that new people dont make this mistake. thanks

its the one to the right and the cable im talking about its the blue and red
also here is the link
also here is the guide

http://www.frsport.com/SR20DET-Swap-...SR20_t_26.html

07-23-2008, 05:16 PM	#1
xpicer Join Date: Sep 2006 Location: us Age: 36 Posts: 40 Trader Rating: (0) Feedback Score: 0 reviews	This goes to all the wiring experts & people with enough knoledge with AAC IACV Ok I did my sr swap about 2 years ago and always had small issues , and i worked them out little by little , now i finally decided to tuck away my harness , witch was done by me also , but now i found a problem that maybe some of have already worked out , now i used the fr sport guide . but when you have to wire the chassis sockets into the 240sx one , i know that almost no one cares or wires the 3rd small grey socket , and most people just leave it there ( i have seen enough harnesses to tell ) , but now i traced the cables so i could eliminate them from the harness but i realized that one of the wires ( blue and red )on the small grey socket goes to one of the pins of the idle motor , now in the guide it says to splice together black and blue and red wire , but does anyone have a diagram of the idle motor , circuit , i am wondering if this was the reason why i had a really crappy idle , please if anyone could chime in it would be apreciated and i will contact frsport and have them add that so that new people dont make this mistake. thanks its the one to the right and the cable im talking about its the blue and red also here is the link also here is the guide http://www.frsport.com/SR20DET-Swap-...SR20_t_26.html