my s13 vq swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ej1bullet · 08-22-2011, 05:51 PM

hay there guys i just recently got a 89 Nissan 240 sx with a blown head gasket and diced to swap it out with a vq motor . so i got a hold of a 2004 off a q45 and also a automatic teitonic tranny that i wold love to put on . i will be posting up pics soon ..

the only thing that i who'd need help in is the engine harness .
ive already got the one from the g35 and the s13 one so if any one got any info let me no thanks guys enjoy !

ej1bullet · 08-22-2011, 06:05 PM

hear are sum pics enjoy

44,xxx mils on the motor

ej1bullet · 08-22-2011, 06:11 PM

the only thing is that the car was in a car crash so the oil pan and the oil receiver was damage but that's nothing for what i got it for i got the ecm ,tranny , engine wiring harness and the vq for free lol so it was a deal

shalezzz · 08-22-2011, 06:23 PM

Chase Bays Engine Harness - Nissan VQ35DE VQ swap - Nissan 240sx - ChaseBays.com
pretty sweet, saves a head ache and a half, on my list of parts for an ls swap

Bambi · 08-22-2011, 06:27 PM

Automatic tectonic tranny? That's really interesting! I had that exact same car too, an '89 two tone coupe with the same two colors. I miss it so damn much... hope you're preserving the two tone!

What other plans do you have your car?

ej1bullet · 08-22-2011, 07:09 PM

Quote:

Originally Posted by Bambi

Automatic tectonic tranny? That's really interesting! I had that exact same car too, an '89 two tone coupe with the same two colors. I miss it so damn much... hope you're preserving the two tone!

What other plans do you have your car?

yha lol Automatic tectonic tranny i just dint know haw it was called lol
yha it seems like a nice car my cuzzin dint want it so i got it off of him for free it has the electronic tach by the window it still works and has 90,xxx mils on the chssy .. im planing to just do the vq swap and suspension just a dd undercover monster and turboing it .

ej1bullet · 08-22-2011, 07:13 PM

Quote:

Originally Posted by shalezzz

Chase Bays Engine Harness - Nissan VQ35DE VQ swap - Nissan 240sx - ChaseBays.com
pretty sweet, saves a head ache and a half, on my list of parts for an ls swap

thanks for the link ... ive seen this before but im trying to use what i got to save mulla ...
witch one is the ls swap if i may ask ?? i em new to Nissan all i know is the red top,black top ,and rb swap but not an ls . i only herd of that swap for Hondas

SnakeKack · 08-22-2011, 07:27 PM

LS1 Out of a Camaro, Corvette, Firebird, GTO, etc... 5.7 Liter GM V8

shalezzz · 08-22-2011, 07:36 PM

Quote:

Originally Posted by ej1bullet

thanks for the link ... ive seen this before but im trying to use what i got to save mulla ...
witch one is the ls swap if i may ask ?? i em new to Nissan all i know is the red top,black top ,and rb swap but not an ls . i only herd of that swap for Hondas

lol lsvtak for honda na im talking about the ls line of motors by chevy/gm its like ls1 ls2.... the term ls can encompass a ton of different engines from different cars and so on im trying to find an ls1 or ls2 out of a gto or fbody or corvette. its a v8 can get like 400whp pretty easy and reliably

ej1bullet · 08-22-2011, 08:23 PM

Hay whats up guys having troubles finding the functions of the plugs from the 240 harness i know where they go on the 240 the ones on the left go to the shock tower and the ones on the right go to the inside by the glove box
need to know the names and functions where they go thanks for your help

ej1bullet · 08-22-2011, 08:27 PM

Quote:

Originally Posted by shalezzz

lol lsvtak for honda na im talking about the ls line of motors by chevy/gm its like ls1 ls2.... the term ls can encompass a ton of different engines from different cars and so on im trying to find an ls1 or ls2 out of a gto or fbody or corvette. its a v8 can get like 400whp pretty easy and reliably

oh ok lol i was thinkg of a Nissan lol thay are so ezay to cum by and the harness is also very basic ive dun the harness for my buddy with a miata

ej1bullet · 08-22-2011, 08:32 PM

hear is the vq harness

ej1bullet · 08-22-2011, 08:34 PM

ive began cutting and labeling the wires of the vq wire harness

shalezzz · 08-22-2011, 08:49 PM

Quote:

Originally Posted by ej1bullet

oh ok lol i was thinkg of a Nissan lol thay are so ezay to cum by and the harness is also very basic ive dun the harness for my buddy with a miata

lol yea from what i heard its great not super hard(im not fond of harnesses), good luck bro, im jealous of the 2 tone coupe, 2 tone coupe shits on my black hatch lol

ej1bullet · 08-22-2011, 08:59 PM

Quote:

Originally Posted by shalezzz

lol yea from what i heard its great not super hard(im not fond of harnesses), good luck bro, im jealous of the 2 tone coupe, 2 tone coupe shits on my black hatch lol

lol thanks man ... yha i actually like this car i never like the other 240 , its also supper clean on the interior and on the out side . but i only have on problum by the out side door it has a big dent that's all it has

ej1bullet · 08-23-2011, 01:24 AM

ej1bullet · 08-23-2011, 01:51 AM

ok so i did a lil search and this what i came up with

1 b ground
111 gy/l from output from the ecu relay
115 b/w ground
116 b/r ground
109 w/b ign sw
121 r/w 12+ constant

so im just going to cut the wires from the 13 harness and plug them in to the z33 harness

ej1bullet · 08-25-2011, 12:48 AM

Quote:

Originally Posted by ej1bullet

Hay whats up guys having troubles finding the functions of the plugs from the 240 harness i know where they go on the 240 the ones on the left go to the shock tower and the ones on the right go to the inside by the glove box
need to know the names and functions where they go thanks for your help

ok found out what they are hear is the diagram
very important to the swap !

Brown Plug, 8 pin, 3 pins empty, cut and rewire as necessary
Red/Black - ECU relay ground pin controlled by pin 4 of ECU, connect to ground pin of ECU relay
Brown - Power source for all sensors, connect to switched power
Green/Yellow - AC relay, not needed
Black/Pink - fuel pump relay ground pin controlled by pin 104 of ECU, connect to ground pin of fuel pump relay
Green/Orange - park/neutral position to pin 35, not needed

Small Grey Plug, 6 pin, 2 pins empty, not needed
Black - ground, not needed
Blue/Yellow - exhaust temp sensor signal to pin 26 of ECU, not needed
Blue/Green - AC power, not needed
Blue/Red - FICD ground, not needed

Big Grey Plug, 8 pin, 2 pins empty, cut off and rewire as needed
Blue/Red - coil pack power, connect to switched power
Black/Red - ingition power, connect to switched power
Blue/Yellow - AAC valve power, connect to switched power
Black/White - ECU power to pin 47 and 38 of ECU, connect to switched power
Blue/Green - power from the AC relay, power goes to the AC compressor and the FICD, not needed
Red - ECU Backup power to pins 46 and 109 of ECU, connect to constant power

Dash Connector, 15-pin white plug next to the ECU
Black - ground for CONSULT, not needed
Green/White - Clock (CLK) synchronization pin for CONSULT, not needed
Green - Transmit (TX) pin for CONSULT, not needed
Red/White - Fuel Pressure Control Module, not needed
Blue/Black - Thermal Transmitter for OEM coolant temp gauge, not needed
Yellow/Red - Tach signal for OEM tach, not needed
Green/Red - Clock signal for CONSULT, not needed
Orange/Black - exhaust temp warning lamp, not needed
Green/Black - Receive (RX) pin for CONSULT, not needed
Blue/Green - Thermistor Control Amplifier, not needed
Orange - Start Signal, connect to start signal from ignition switch
Blue/White - Intake Air Temperature Sensor, not needed
Yellow/Green - Vehicle Speed Sensor (VSS) signal from speedometer, not needed

ej1bullet · 12-20-2011, 04:22 AM

ok guys so o got sum parts for my swap up date !!

hear are sum of the parts i got headers,fuel railes , 3 inch electric cut out also pulleys and a push start button......

:naughty d:

nagashimi · 12-20-2011, 04:39 AM

Very nice thats straight up ojo LOL!

irax · 12-22-2011, 03:32 AM

Quote:

Originally Posted by jakalkhansk4

Cool story mods, if you remove the spam just remove my post too ffs

bots are getting super high tech now

ej1bullet · 12-22-2011, 07:21 AM

Quote:

Originally Posted by nagashimi

Very nice thats straight up ojo LOL!

is that you Micky??

ej1bullet · 12-22-2011, 07:23 AM

Quote:

Originally Posted by jakalkhansk4

Quote my spam message so it makes it more difficult to remove!

wait what are you talking about ?

bb4_96 · 12-22-2011, 07:34 AM

Q45 came with vq?

ej1bullet · 12-22-2011, 07:44 AM

Quote:

Originally Posted by bb4_96

Q45 came with vq?

no the q45 came with a v8 i em putting a v6 3.5 vq motor from an early infinity g35 ....

Darren · 12-22-2011, 08:07 AM

Nice work on the car... Keep going, from the sounds of it, you're gone build this for a record low price!

Moar money for cool parts!

ej1bullet · 12-23-2011, 04:22 AM

Quote:

Originally Posted by Darren

Nice work on the car... Keep going, from the sounds of it, you're gone build this for a record low price!

Moar money for cool parts!

lol i know right but broke the pige bank today for sum oem parts

ej1bullet · 12-23-2011, 04:24 AM

got sum new parts in

240sxr · 12-23-2011, 07:28 PM

nice job,I have a VQ also...so sweet and powerful engines
you should return that regular VQ35 oil pump and put a rev up oil(05-06) pump while you're at it
and those headers are not for a VQ

irax · 12-24-2011, 03:21 AM

Quote:

Originally Posted by 240sxr

nice job,I have a VQ also...so sweet and powerful engines
you should return that regular VQ35 oil pump and put a rev up oil(05-06) pump while you're at it
and those headers are not for a VQ

there is two sets of headers in that pic

which one isn't for the VQ other than the obvious v8 headers?

08-22-2011, 05:51 PM	#1
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	my s13 vq swap hay there guys i just recently got a 89 Nissan 240 sx with a blown head gasket and diced to swap it out with a vq motor . so i got a hold of a 2004 off a q45 and also a automatic teitonic tranny that i wold love to put on . i will be posting up pics soon .. the only thing that i who'd need help in is the engine harness . ive already got the one from the g35 and the s13 one so if any one got any info let me no thanks guys enjoy !

12-20-2011, 04:22 AM	#19
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	ok guys so o got sum parts for my swap up date !! hear are sum of the parts i got headers,fuel railes , 3 inch electric cut out also pulleys and a push start button......:naughty d:

08-22-2011, 06:05 PM	#2
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	hear are sum pics enjoy 44,xxx mils on the motor

08-22-2011, 06:11 PM	#3
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	the only thing is that the car was in a car crash so the oil pan and the oil receiver was damage but that's nothing for what i got it for i got the ecm ,tranny , engine wiring harness and the vq for free lol so it was a deal

08-22-2011, 06:23 PM	#4
shalezzz Zilvia Junkie Join Date: Sep 2010 Location: Philadelphia/Bensalem Age: 35 Posts: 421 Trader Rating: (4) Feedback Score: 4 reviews	Chase Bays Engine Harness - Nissan VQ35DE VQ swap - Nissan 240sx - ChaseBays.com pretty sweet, saves a head ache and a half, on my list of parts for an ls swap

08-22-2011, 07:27 PM	#8
SnakeKack Zilvia Junkie Join Date: Dec 2005 Location: Florida Age: 37 Posts: 306 Trader Rating: (6) Feedback Score: 6 reviews	LS1 Out of a Camaro, Corvette, Firebird, GTO, etc... 5.7 Liter GM V8

08-22-2011, 08:23 PM	#10
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Hay whats up guys having troubles finding the functions of the plugs from the 240 harness i know where they go on the 240 the ones on the left go to the shock tower and the ones on the right go to the inside by the glove box need to know the names and functions where they go thanks for your help

08-22-2011, 08:32 PM	#12
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	hear is the vq harness

08-22-2011, 08:34 PM	#13
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	ive began cutting and labeling the wires of the vq wire harness

08-23-2011, 01:24 AM	#16
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews

08-23-2011, 01:51 AM	#17
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	ok so i did a lil search and this what i came up with 1 b ground 111 gy/l from output from the ecu relay 115 b/w ground 116 b/r ground 109 w/b ign sw 121 r/w 12+ constant so im just going to cut the wires from the 13 harness and plug them in to the z33 harness

12-20-2011, 04:39 AM	#20
nagashimi Join Date: Dec 2011 Location: Sillicon valley Age: 34 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Very nice thats straight up ojo LOL!

12-22-2011, 07:34 AM	#24
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	Q45 came with vq?

12-22-2011, 08:07 AM	#26
Darren Zilvia Addict Join Date: Apr 2010 Location: kelowna, bc, canada Age: 49 Posts: 680 Trader Rating: (1) Feedback Score: 1 reviews	Nice work on the car... Keep going, from the sounds of it, you're gone build this for a record low price! Moar money for cool parts!

12-23-2011, 04:24 AM	#28
ej1bullet Join Date: Jul 2011 Location: san jose Age: 35 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	got sum new parts in

12-23-2011, 07:28 PM	#29
240sxr Join Date: Jan 2008 Location: tijuana,baja,mexico Age: 37 Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	nice job,I have a VQ also...so sweet and powerful engines you should return that regular VQ35 oil pump and put a rev up oil(05-06) pump while you're at it and those headers are not for a VQ