Z m/c question, sorry i searched though

[nlzmo400r]

well after doing a lot of searching, ive decided to do the z32 brake upgrade, however have a couple small questoins left.

1. I have z32 1990 26mm calipers... ive heard of 'adapter brackets' being needed, what are these and do i 'need' them? i have a 93 fastback (non ABS)

2. I plan on getting the s14 master cylinder (15/16 as opposed to the S13's 7/8 and the Z's 1' or 1 1/16) How would i know if the car im pulling this from doesnt have ABS?

3. I didnt want too much front bias braking force, so i got some steel braided lines for the rear as well, will this be enough? (i plan on also getting some Axxis MM pads for the rear too)

4. If anyone wants to gladly make a list of what all is needed (for safety)for a 4lug front z32 brake upgrade feel free, this is what ive got:

i. z32 calipers (3oMM or 26mm depending on rim)

ii.4lug z32 rotors (will any z32 sized rotor work on my 26mm caliper (it has to clear my stock SE rims)

iii. steel braided lines (w/ correct fittings)

iv. s14 non-abs m/c (15/16) will this bolt right up to my stock lines????

v. z32 sized brake pads (project Mu/axxis/etc)

Is that all? Feel free to add, hopefully we can make a sticky of this so idiots like me will stop askign questions