My zenki S14

[madserv]

Hi Guys,

i am new on this form, and the reason to join this form is , i bought NISSAN S14 with sr20det engine. but i am planing to swap engine soon so i need some advise, i am confuse with 2 engines. should i go for 1j/2j engine or i should go for ls1/ls7 engine !~ can u please guide me and give me suggestions for my new project car ??

i am looking for arround 600whp in my s14..
please note i will rebuilt this silvia from scratch, new paint , all new busing , suspension , and in the end new engine..

thanks. i will update my this thread .

[madserv]

Some adjustable suspension parts received from ORT SUSPENSION BANKOK.

picture included. and today i start installing parts ...

[madserv]

here are some pictures of
1) skyline brakes installed ,
2) tein coilovers
3) HUBS

[madserv]

[madserv]

Guys,

Now i am confused between 2 engines. 2j or sr20det . i am looking for 450whp ? please help me suggest the engine. i need it for street drags.

thanks.

[Teigen]

Congrats of having bought a nice car!

I can tell you, no problem making 600whp out of a SR20 engine. I am currently doing a 1000whp SR20 engine.

You would get more torque with a 2jz but it's a lot more expensive IMO, at least where I live. SR20 block can handle up to 700hp if the cooling is good enough. If you want more than that I would suggest you to have darton sleeves inserted.

You literally woul only need to upgrade connection rods, pistons and headgasket for a 450 whp, + a larger turbo. Stock inlet manifold can be used up to 500 flywheel hp.


If I were you I would have chosen the SR engine for the build

[new2sr20]

Originally Posted by madserv

Some adjustable suspension parts received from ORT SUSPENSION BANKOK.

picture included. and today i start installing parts ...

What was the price for the ORT suspension components?

[madserv]

Originally Posted by new2sr20

What was the price for the ORT suspension components?

Item

Tie Rod Complete Set
Set 1 Baht 9,500.00

Front Tension Rod
Set 1 Baht 3,500.00

Rear Camber
Set 1 Baht 5,000.00

Rear Toe
Set 1 Baht 3,500.00

Rear Traction
Set 1 Baht 3,500.00

Rear Hicas Bar
Set 1 Baht 2,000.00

Subframe Bushing Collar Kit
Set1 Baht 2,000.00

Steering Rack Mount Bush
Set 1 Baht 1,000.00
Total
Baht 30,000.00

[BlewByYou]

^$1000 usd not bad..


I'd go with:
Rb26. Rb25 trans, Single gt35 turbo, 850cc injectors, aeromotive 340 pump, Power fc easy 5-600whp for what your gonna spend on that 2j engine alone lol

[madserv]

Originally Posted by BlewByYou

^$1000 usd not bad..


I'd go with:
Rb26. Rb25 trans, Single gt35 turbo, 850cc injectors, aeromotive 340 pump, Power fc easy 5-600whp for what your gonna spend on that 2j engine alone lol

Thats nice but only options i have here is 1j 2j or sr20 !!!

[madserv]

some more pics

[greenwood]

fail color

[madserv]

Originally Posted by greenwood

fail color

oh comon i know, i will change this color and rims.. i just bought this car.. 1st working on suspension and then on engine and in the end paint and rims.

[BlewByYou]

1j or 2j is a good option too. stock forum hold alot of power!!

[slideslidegnarslide]

It's awesome to see dudes from all over the world. If you have an unlimited budget do a 2j. If you on a budget do 1j. Sr's can handle a lot of power after you build them. A 1 or 2j can make 450 on stock internals.


Oh and be prepared for people to hate. This is zilvia. Every one is rude

[madserv]

with installing 1j 2j , how much handling of car will be effected ?

secondly keep in mind i will be looking for 500whp, and need power for drags on street. not on track..

[madserv]

well i have the only s14 in my country so u can imagine how dificult is to find parts here... and well building of sr20 will cost me same as i get 2j in same price... ....

[Big Zee]

don't the RUCA's face forward ? so they don't rub the coilovers ? or is it just me ?

cool sounding build so far, I would rock the 1J personally as its cheaper where I am, so I would assume the same for you, a single GT35 turbo, 850's, AEM EMS, FMIC, 255 or 340 LPH pump and water/meth injection should net you a decent amount of power. also, a good set of cams and a good ( apexi or Tomei ) Head Gasket.

[madserv]

So here i come again, its been a long time no update on my project, in the mean while i was just bz collecting some stuff for my car.

some new lights. for my zenki...

[madserv]

Originally Posted by Big Zee

don't the RUCA's face forward ? so they don't rub the coilovers ? or is it just me ?

cool sounding build so far, I would rock the 1J personally as its cheaper where I am, so I would assume the same for you, a single GT35 turbo, 850's, AEM EMS, FMIC, 255 or 340 LPH pump and water/meth injection should net you a decent amount of power. also, a good set of cams and a good ( apexi or Tomei ) Head Gasket.

no i had put RUCS's wrong. i fix them now

[FaLKoN240]

Please keep updating. It's really interesting to see what international s chassis owners do!

If it all costs the same, do a 2J.

[madserv]

OK here are some few things i collected.

[madserv]

here is the bride gradation fabric for some interior work in s14...

[madserv]

Here comes the big wheels !~

Work Meister

Front 18x9.5
Rear 18x10.5












So now i am waiting for my tires, already ordered NITTO tires. after tires comes i gona start some denting and paint on my s14... ...

[madserv]

Dent and paint work started .....ImageUploadedByTapatalk 21366987435.721309.jpgImageUploadedByTapatalk 21366987454.810774.jpg

[madserv]

My top mount turbo mainfold ... Arrives

ImageUploadedByTapatalk 21367000889.888304.jpgImageUploadedByTapatalk 21367000905.264712.jpg

[DeCepTiCon]

Wow it is good to see other S14 in a different region! Keep us updated on your project!

[Bokeh]

That's a lot of parts collected! Can't wait to see where this goes.

[madserv]

I hope everything goes well

[xoxide]

Digging it. What are your plans for the color? I think the yellow with the Meisters would look pretty rad!