CA SoCal CA18DET, s14 KA24de, STRi, S14 leftovers parts...need all gone - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*DALAZ_68* · 10-27-2014, 02:31 PM

Engine swap is not going to be parted out, and i will not break apart the KA either.

out of a 98. Needs front,rear, and maybe oil pan gaskets done... I believe it had a bit of timing chain rattle but nothing crazy... 600 obo

i have an s14 instake manifold, alternator and 95 compressor if you want em they are yours...

#1 thru #3 180 and #4 at 185

OIL temp 120
OIL press 150
Water temp 120 -will come with hose adapter i made for the sensor
Fuel press 150 - will come with fitting I made to hook up the fuel line

CF panel 35
Vent panel 20 shipped

adapters i got made for sensors will be included like below

490 shipped if you buy all four NEED EM GONE!!!

everything replaced was new OEM or better... she did 250hp on a safe tune low boost using NIStune ecu which is included and the license as well...

Engine:
CA18DET 50kmiles
KA throttle body
Z32 Maf
Denso 560cc injectors
Nismo FPR
ACL crank bearings
ACL Rod bearings
Nissan rings
Cometic HG
ARP head bolts
ARP rod bolts
Cometic Exhaust gaskets
Ceramic coated Exhaust manifold
Greddy Timing Belt
NIStune ECU (ill provide the license for your laptop to be able to tune the ECU how you see fit)
HKS Recirculated BOV
nissan belt tensioner/pulley(new)
block and head cleaned/decked...
Intake manifold Matched to KA TB
Nismo CA strut bar
Custom FMIC/pipping
Wiring specialties Engine harness (NEW)
Wirring Specialties lower harness (NEW)
JUN lightweight flywheel
6puck ceramic clutch
SPL fork bung for clutch
brand new springs for throwout bearing assemblies
ARP flywheel bolts
new hoses everywhere
all Nismo CA mounts
Nismo trans mount

No TURBO OR LINES

like i said...rebuilt like new but better and stronger...

everything was new and pretty much still is...

im also including the FMIC with the pipping and HKS BOV... so yes this is a drop in turn key ready to go swap thats been rebuilt has new parts, properly tuned, and hasnt even been beaten on yet...

3000 is what im asking for and its deff worth the price... dont ask me to part out or to sell for dirt cheap

if you find something cheaper with everything i have on it then by all means buy that...i know know i have built this thing right and i dont need to hear it...

Throw me a price worth having and you can has...if not its going in the trash sometime soon...

[/COLOR][/SIZE]

SOLD ITEMS
-condenser
-mirrors
-door ajar sensors
-glove box
-exhaust manifold
-airbox/maf/inplastice intake pieces
-tail light corners
-visors
-alternator
-a/c compressor
-Power steering lines
-Tail lights
-Brake pedal assembly

*DALAZ_68* · 10-31-2014, 12:35 AM

bumpity bump

vjimmyv · 10-31-2014, 10:01 AM

any chance you would sell the rods and pistons

onessari · 10-31-2014, 01:06 PM

Need that s14 air box with the maf as well. Does the air box have the sensor, if so I will take it with the sensor,

StuckeyOG · 10-31-2014, 02:25 PM

Got a plug w/ few inches of wire still attatched for the turn signal on an S14 by any chance?

cheezy240 · 10-31-2014, 03:07 PM

how much for sun visors shipped to 96756?

billyinse · 10-31-2014, 08:40 PM

happen to have an s14 clock spring?

v30magna · 11-01-2014, 04:21 PM

You got a Nismo front strut tower bar? Got a pic? How much shipped to 27845?

818 ZENKI · 11-02-2014, 05:10 AM

do you have a driver side window motor?

4513 · 11-02-2014, 09:43 AM

Do you have s14 trunk/gas cable?

*DALAZ_68* · 11-02-2014, 12:05 PM

Quote:

Originally Posted by vjimmyv

any chance you would sell the rods and pistons

No

Quote:

Originally Posted by onessari

Need that s14 air box with the maf as well. Does the air box have the sensor, if so I will take it with the sensor,

See sold items

Quote:

Originally Posted by StuckeyOG

Got a plug w/ few inches of wire still attatched for the turn signal on an S14 by any chance?

Nope

Quote:

Originally Posted by cheezy240

how much for sun visors shipped to 96756?

See sold items

Quote:

Originally Posted by billyinse

happen to have an s14 clock spring?

If its in the steering wheel its being sold with the steering wheel

Quote:

Originally Posted by 818 ZENKI

do you have a driver side window motor?

Nope

Quote:

Originally Posted by 4513

Do you have s14 trunk/gas cable?

Maybe

s14tello · 11-02-2014, 11:29 PM

do you have driver side window switch for s14 ?

*DALAZ_68* · 11-03-2014, 03:06 PM

Quote:

Originally Posted by s14tello

do you have driver side window switch for s14 ?

nopes, gone as well

10-31-2014, 12:35 AM	#2
DALAZ_68 not giving a fuck Join Date: Apr 2007 Location: Los angeles Age: 38 Posts: 15,077 Trader Rating: (104) Feedback Score: 104 reviews	bumpity bump __________________ LOL 240... whats better than 1? 5 1's ...lol PSN & XBL GT : Wh0pp3r68 CLUB LEXUS : Wh0pp3r

11-02-2014, 05:10 AM	#9
818 ZENKI Zilvia Member Join Date: Jun 2009 Location: Killa Cali Age: 33 Posts: 207 Trader Rating: (3) Feedback Score: 3 reviews	do you have a driver side window motor? __________________ WTB: S14 Wiper motor and S15 HLSD w/ Shafts It's always broken!

10-27-2014, 02:31 PM	#1
DALAZ_68 not giving a fuck Join Date: Apr 2007 Location: Los angeles Age: 38 Posts: 15,077 Trader Rating: (104) Feedback Score: 104 reviews	SoCal CA18DET, s14 KA24de, STRi, S14 leftovers parts...need all gone Engine swap is not going to be parted out, and i will not break apart the KA either. out of a 98. Needs front,rear, and maybe oil pan gaskets done... I believe it had a bit of timing chain rattle but nothing crazy... 600 obo i have an s14 instake manifold, alternator and 95 compressor if you want em they are yours... #1 thru #3 180 and #4 at 185 OIL temp 120 OIL press 150 Water temp 120 -will come with hose adapter i made for the sensor Fuel press 150 - will come with fitting I made to hook up the fuel line CF panel 35 Vent panel 20 shipped adapters i got made for sensors will be included like below 490 shipped if you buy all four NEED EM GONE!!! everything replaced was new OEM or better... she did 250hp on a safe tune low boost using NIStune ecu which is included and the license as well... Engine: CA18DET 50kmiles KA throttle body Z32 Maf Denso 560cc injectors Nismo FPR ACL crank bearings ACL Rod bearings Nissan rings Cometic HG ARP head bolts ARP rod bolts Cometic Exhaust gaskets Ceramic coated Exhaust manifold Greddy Timing Belt NIStune ECU (ill provide the license for your laptop to be able to tune the ECU how you see fit) HKS Recirculated BOV nissan belt tensioner/pulley(new) block and head cleaned/decked... Intake manifold Matched to KA TB Nismo CA strut bar Custom FMIC/pipping Wiring specialties Engine harness (NEW) Wirring Specialties lower harness (NEW) JUN lightweight flywheel 6puck ceramic clutch SPL fork bung for clutch brand new springs for throwout bearing assemblies ARP flywheel bolts new hoses everywhere all Nismo CA mounts Nismo trans mount No TURBO OR LINES like i said...rebuilt like new but better and stronger... everything was new and pretty much still is... im also including the FMIC with the pipping and HKS BOV... so yes this is a drop in turn key ready to go swap thats been rebuilt has new parts, properly tuned, and hasnt even been beaten on yet... 3000 is what im asking for and its deff worth the price... dont ask me to part out or to sell for dirt cheap if you find something cheaper with everything i have on it then by all means buy that...i know know i have built this thing right and i dont need to hear it... Throw me a price worth having and you can has...if not its going in the trash sometime soon... [/COLOR][/SIZE] SOLD ITEMS -condenser -mirrors -door ajar sensors -glove box -exhaust manifold -airbox/maf/inplastice intake pieces -tail light corners -visors -alternator -a/c compressor -Power steering lines -Tail lights -Brake pedal assembly __________________ LOL 240... whats better than 1? 5 1's ...lol PSN & XBL GT : Wh0pp3r68 CLUB LEXUS : Wh0pp3r

10-31-2014, 10:01 AM	#3
vjimmyv Leaky Injector Join Date: Jun 2014 Location: LA Age: 36 Posts: 136 Trader Rating: (1) Feedback Score: 1 reviews	any chance you would sell the rods and pistons

10-31-2014, 01:06 PM	#4
onessari Leaky Injector Join Date: Aug 2011 Location: California Age: 33 Posts: 64 Trader Rating: (1) Feedback Score: 1 reviews	Need that s14 air box with the maf as well. Does the air box have the sensor, if so I will take it with the sensor,

10-31-2014, 02:25 PM	#5
StuckeyOG Zilvia Junkie Join Date: Jun 2014 Location: So-Cal, SFV Posts: 410 Trader Rating: (21) Feedback Score: 21 reviews	Got a plug w/ few inches of wire still attatched for the turn signal on an S14 by any chance?

10-31-2014, 03:07 PM	#6
cheezy240 Join Date: Dec 2012 Location: Kauai, Hawaii Age: 32 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	how much for sun visors shipped to 96756?

10-31-2014, 08:40 PM	#7
billyinse Join Date: Nov 2013 Location: columbia Age: 39 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	happen to have an s14 clock spring?

11-01-2014, 04:21 PM	#8
v30magna Leaky Injector Join Date: Sep 2014 Location: Jackson Age: 42 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	You got a Nismo front strut tower bar? Got a pic? How much shipped to 27845?

11-02-2014, 09:43 AM	#10
4513 Join Date: Apr 2011 Location: orange co CA Age: 39 Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	Do you have s14 trunk/gas cable?

11-02-2014, 11:29 PM	#12
s14tello Join Date: Sep 2014 Location: california Age: 29 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	do you have driver side window switch for s14 ?