OK KA-T Partout, Garage Cleanup, JDM goodies for Sale Thread

[thetopcow]

Need to buy new equipment for the shop so we're cleaning out our parts hoard! All the parts that were on our KA-T setup were in normal working order when we pulled the engine (the engine still ran like a top as well). Just pulled it all since we are doing the VK56 swap and now need funds to push it forward and get the shop setup. It's been a while since we've priced items, so if it seems high please just shoot us an offer! All prices include shipping (buyer pays PayPal fee)!! Email is best - [email protected]!

The KA-T setup in the car:


Nistune ECU (preloaded with a 15psi tune plus several more) - $600 shipped

Garret T3/T4, 57 trim, .63 AR turbine (bought new, 400hp capable, great fit for the KA) - SOLD


DEI turbo blanket (totally awesome blanket, small frays) - $110 shipped

RevHard manifold (stout and no worries of cracks!) - SOLD


Tial wastegate w/10lb spring and dump pipe - SOLD

Deatchwerks 740cc injectors - SOLD

Skullworks oil block (filter relocation block) - $110 shipped

Mid-mount intercooler setup w/Blitz BOV (recirculated), intercooler piping, intake pipe, couplers and clamps - powdercoated crinkle black Note: Specific to the t3/t4 revhard setup above - $335 shipped




Custom downpipe (turbo to exhaust; cat-delete style); fitment is specific to S13 w/ T3 turbo on a RevHard manifold - $100 local pick up only


AEM Dry Flow Filter and Z32 MAF w/filter adaptor - $100 shipped


Z32 MAF - $70 shipped



Peak Performance motor and trans mounts w/spare race bushing inserts - $230 shipped

Broadway 360mm, flat mirriors x3 (NIB) - $35 each shipped


S13 Silvia Grill (big letter) - SOLD


Prosport Performance Gauge Set (amber/white) w/ A-piller gauge pod - $200 shipped for the whole setup
--Exhaust gas temp
--Water temp (missing shade and bracket)
--Oil temp
--Oil pressure


AEM Tru-Boost boost controller, works awesome - $230 shipped


JDM S14 5 lug - $220 shipped


JDM S14 Iron 4 pistion front calipers (z32 30mm) - $160 shipped


JDM tension rods - SOLD


Nardi 330 deep corn suede knock (Fardi) - $85 shipped


KTS S13/14 inner/outer tie rods, super beefy - $120 shipped


JDM "new driver" magnets - $30 shipped


2 sets of KA 240/248 cams w/gears (248/248 cam swap possible) - $150 shipped

S13 KA manual transmission - $150 local pick up only


S13 Energy Suspension arm set - $150 shipped



Thanks for looking!
All parts are located in Bartlesville, OK. Local pickup available!!
Payment via PayPal or cash in person ONLY. Buyer pays PayPal fee.
Email [email protected] with questions/inquiries.

[thetopcow]

I added pictures to the main thread.

Feel free to make offers!

Never hurts to ask.

[ZaK687]

Did you make the shade for the center vent gauge pod? And is it detachable?

[laurentj23]

Does the seat fit s14 rail?

[thetopcow]

Originally Posted by ZaK687

Did you make the shade for the center vent gauge pod? And is it detachable?

Yes I did. I made it all fit together. I had a big issue with seeing my gauges when the sun hit them.

Originally Posted by laurentj23

Does the seat fit s14 rail?

No. I have a solid seat mount I can send with the seat or you could find someone local to adapt you stock seat rails.

[thetopcow]

OBO on everything.

I really need cash more than stuff.

Thanks for looking!

Bump.

[RocketBUNNY]

Is it a real corbeau? Would you ship it to Canada? I know it'll be more then the cost of the seat but I don't care as long as it's a legit corbeau.

[thetopcow]

Originally Posted by RocketBUNNY

Is it a real corbeau? Would you ship it to Canada? I know it'll be more then the cost of the seat but I don't care as long as it's a legit corbeau.

The seat sold.

Also the white steering wheel sold.


This stuff is starting to disappear. A big thank you to all purchasers thus far!

Reformatted the post to make it a bit clearer and lowered prices. And all prices now include shipping!!!

[d_nice]

good parts here

[anti tyler]

Little pricey on some things, but anyway onto what I wanted to ask.

Sell just the intercooler with elbows?

Don't need any piping I make my own.

[speedingmofa]

Whats included with the nistune? And is it the type 3 board?

[thetopcow]

Originally Posted by speedingmofa

Whats included with the nistune? And is it the type 3 board?

It is a type 4 board but I made it work in my s13 via the wiring harness I have listed.

[jdm_rydaa]

Would you happen to have a lower harness ?


Sent from my iPhone using Tapatalk

[thetopcow]

Originally Posted by jdm_rydaa

Would you happen to have a lower harness ?


Sent from my iPhone using Tapatalk

I do not have one separately from the main harness I have listed.

[irritatedmax]

Turbo, injectors, wastegate, turbo mani, and tension rods sold! Still have the rest and it needs to go!

I'm the OP's brother and it's a mix of our stuff. Just for clarification on why I'm posting.

[anti tyler]

I'm not gonna ask again damnit sell me just the inter cooler!

[irritatedmax]

Selling just the intercooler makes the rest of it essentially worthless. It's a mid-mount setup for a S13 KAT with a T3/T4 turbo on a RevHard manifold. Without the intercooler, it's just some pipes.

[anti tyler]

Okay what you're saying essentially is this piping and inter cooler is already worthless. . If it's specific to the revhard setup then you should be selling it with the revhard manifold...
Without the manifold it's still just some pipes.


But that's fine, I don't need all that piping anyway, it's just a straight shot into the turbo and intake.


Thanks for the reply though I guess.

[irritatedmax]

eBay/Treadstone knocked off RevHard mani's a while back so there's plenty floating around and easy to get new. No sense in packaging them together. This is just a nice bolt on package for someone with that setup.

If your interested in the intercooler and elbows, feel free to make an offer.

[Slow96240sx]

Will you do 20 shipped for the mirror

[918s13]

i was wondering if u still have the energy suspension for sell

[thetopcow]

Originally Posted by 918s13

i was wondering if u still have the energy suspension for sell

I do pm me if you would.