OH FS: R32 GT-R OEM Seats - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SexOnWax · 08-03-2014, 09:28 PM

Up for grabs is a pair of solid and genuine GTR seats from a Skyline BNR32 chassis. Rails have not been modified to fit an S-Chassis so three of the four will bolt up no problem. Side bolsters are still firm and more than capable of handling spiriting driving duties. Overall very good condition for being 20+ year old seats. Nice upgrade for your interior and (almost) OEM fit and feel.

SOLD!

Thanks to everyone for your interest.

double zero · 08-04-2014, 11:06 PM

you should do way cheaper picked up.

SexOnWax · 08-14-2014, 07:37 AM

Bump!

Don't miss out on owning a pair of JDM goodness! Hands down some of the best OEM seats available and a great deal vs. a full set of racing seats plus rails.

Heck, if you can help get my SR back on the road, I might consider dropping price even lower

double zero · 08-14-2014, 12:15 PM

whats wrong with said sr <---- 0 sr experience

Agentnumber2 · 08-14-2014, 01:12 PM

VERY COOL! Just picked a pair up two days ago for my S13. Out of curiosity, you mentioned that the seats weren't modified, so did you just have three bolts holding the seat down?

SexOnWax · 08-14-2014, 09:05 PM

Three bolts and the fourth I mocked up a washer big enough to sit on top of the lip of the seat rail. Figure I would leave the rails untouched in case someone with a Skyline wanted them too.

SexOnWax · 09-10-2014, 06:05 AM

Bumps and stuffs

vw203 · 09-10-2014, 01:08 PM

Good price I upgraded to recaro in my bnr and my stick seats made there way into my s14. Double win! Highly recommended to anyone with an s chassis!

supersayianjim · 09-11-2014, 12:49 PM

so, i picked up a set of these recently, and had to do some reconditioning. a few things.

-these don't use nearly the amount of hog-rings the usdm seats use. a total of about 15 give or take.

-you will probably have some rust on the bottom of the seats(at least mine were).\

-you need new zipper/pullers i got mine from a dry cleaning place.

-you will need to adjust the front left tab if these are going into a s13. an easy and not hard to do fix, just go to lowes and get some weldable steel, get a weld and done.

SexOnWax · 09-22-2014, 08:45 PM

^^Nice fix! Big difference from your S13 seats, huh?

The two rear outer bolts closest to the doors on each seat in my S14 are the ones that didn't line up (bottom left on first seat and bottom right on the second). These rails are pretty good condition as you can see...

SexOnWax · 10-04-2014, 08:39 AM

Bump for a fresh new price! $500 shipped!

SexOnWax · 10-16-2014, 07:44 AM

Thursday bumpin'

shephurd · 10-16-2014, 08:52 AM

300 picked up

voiddweller · 01-12-2015, 11:17 PM

Thanks for the seats. Would you mind posting a pic of the washer installed?

voiddweller · 02-26-2015, 01:14 AM

The rails are welded up for both seats now, so it's a perfect fit for any S-Chassis.

08-03-2014, 09:28 PM	#1
SexOnWax Join Date: Sep 2008 Location: Cleveland, OH Posts: 49 Trader Rating: (10) Feedback Score: 10 reviews	FS: R32 GT-R OEM Seats Up for grabs is a pair of solid and genuine GTR seats from a Skyline BNR32 chassis. Rails have not been modified to fit an S-Chassis so three of the four will bolt up no problem. Side bolsters are still firm and more than capable of handling spiriting driving duties. Overall very good condition for being 20+ year old seats. Nice upgrade for your interior and (almost) OEM fit and feel. SOLD! Thanks to everyone for your interest. Last edited by SexOnWax; 01-06-2015 at 09:27 AM.. Reason: Price dropped again for some lucky bloke

08-04-2014, 11:06 PM	#2
double zero Zilvia Member Join Date: Sep 2013 Location: madtown Age: 42 Posts: 185 Trader Rating: (0) Feedback Score: 0 reviews	you should do way cheaper picked up. __________________ Iam here for the free ethanol!

08-14-2014, 07:37 AM	#3
SexOnWax Join Date: Sep 2008 Location: Cleveland, OH Posts: 49 Trader Rating: (10) Feedback Score: 10 reviews	Bump! Don't miss out on owning a pair of JDM goodness! Hands down some of the best OEM seats available and a great deal vs. a full set of racing seats plus rails. Heck, if you can help get my SR back on the road, I might consider dropping price even lower Last edited by SexOnWax; 08-14-2014 at 07:46 AM.. Reason: Added new terms and conditions for potential discount

08-14-2014, 12:15 PM	#4
double zero Zilvia Member Join Date: Sep 2013 Location: madtown Age: 42 Posts: 185 Trader Rating: (0) Feedback Score: 0 reviews	whats wrong with said sr <---- 0 sr experience __________________ Iam here for the free ethanol!

09-10-2014, 01:08 PM	#8
vw203 Zilvia FREAK! Join Date: Aug 2011 Location: Gun wavin New Haven Age: 36 Posts: 1,425 Trader Rating: (7) Feedback Score: 7 reviews	Good price I upgraded to recaro in my bnr and my stick seats made there way into my s14. Double win! Highly recommended to anyone with an s chassis! __________________ スカイライン

08-14-2014, 01:12 PM	#5
Agentnumber2 Leaky Injector Join Date: Jul 2010 Location: CA Age: 33 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	VERY COOL! Just picked a pair up two days ago for my S13. Out of curiosity, you mentioned that the seats weren't modified, so did you just have three bolts holding the seat down?

08-14-2014, 09:05 PM	#6
SexOnWax Join Date: Sep 2008 Location: Cleveland, OH Posts: 49 Trader Rating: (10) Feedback Score: 10 reviews	Three bolts and the fourth I mocked up a washer big enough to sit on top of the lip of the seat rail. Figure I would leave the rails untouched in case someone with a Skyline wanted them too.

09-10-2014, 06:05 AM	#7
SexOnWax Join Date: Sep 2008 Location: Cleveland, OH Posts: 49 Trader Rating: (10) Feedback Score: 10 reviews	Bumps and stuffs

09-11-2014, 12:49 PM	#9
supersayianjim Nissanaholic! Join Date: Jan 2010 Location: location X Posts: 1,815 Trader Rating: (10) Feedback Score: 10 reviews	so, i picked up a set of these recently, and had to do some reconditioning. a few things. -these don't use nearly the amount of hog-rings the usdm seats use. a total of about 15 give or take. -you will probably have some rust on the bottom of the seats(at least mine were).\ -you need new zipper/pullers i got mine from a dry cleaning place. -you will need to adjust the front left tab if these are going into a s13. an easy and not hard to do fix, just go to lowes and get some weldable steel, get a weld and done. __________________ http://www.240sxforums.com/forums/rb...ject-s-rb.html

09-22-2014, 08:45 PM	#10
SexOnWax Join Date: Sep 2008 Location: Cleveland, OH Posts: 49 Trader Rating: (10) Feedback Score: 10 reviews	^^Nice fix! Big difference from your S13 seats, huh? The two rear outer bolts closest to the doors on each seat in my S14 are the ones that didn't line up (bottom left on first seat and bottom right on the second). These rails are pretty good condition as you can see...

10-04-2014, 08:39 AM	#11
SexOnWax Join Date: Sep 2008 Location: Cleveland, OH Posts: 49 Trader Rating: (10) Feedback Score: 10 reviews	Bump for a fresh new price! $500 shipped!

10-16-2014, 07:44 AM	#12
SexOnWax Join Date: Sep 2008 Location: Cleveland, OH Posts: 49 Trader Rating: (10) Feedback Score: 10 reviews	Thursday bumpin'

10-16-2014, 08:52 AM	#13
shephurd Zilvia Member Join Date: Jan 2013 Location: Ohio Posts: 212 Trader Rating: (1) Feedback Score: 1 reviews	300 picked up

01-12-2015, 11:17 PM	#14
voiddweller Zilvia Member Join Date: Jan 2005 Location: Gulf Coast Age: 56 Posts: 251 Trader Rating: (4) Rides Gallery: voiddweller Feedback Score: 4 reviews	Thanks for the seats. Would you mind posting a pic of the washer installed? __________________ 97 S14 SE w/S13 Blacktop 04 CL9

02-26-2015, 01:14 AM	#15
voiddweller Zilvia Member Join Date: Jan 2005 Location: Gulf Coast Age: 56 Posts: 251 Trader Rating: (4) Rides Gallery: voiddweller Feedback Score: 4 reviews	The rails are welded up for both seats now, so it's a perfect fit for any S-Chassis. __________________ 97 S14 SE w/S13 Blacktop 04 CL9