![]() |
|
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Jumping Wires for A/C ?
Hey everyone,
Regarding jumping wires for a/c, what do they mean by that? Do I run a wire that's connected to each? Or do I run a powered 12v wire to each? This is for a 98 240 SE, with an s14 SR if that makes any differences. I found the thread for jumping a/c wires to get the compressor to turn on, but it didn't go into detail on what to do exactly so I don't wanna fry anything. Appreciate the help! Last edited by beeronz; 07-09-2015 at 05:11 AM.. |
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Zilvia FREAK!
![]() Join Date: Nov 2007
Location: dallas, TX
Age: 42
Posts: 1,245
Trader Rating: (12)
![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 12 reviews
|
Typically when people refer to "jumping wires" to get the a/c compressor to turn on they are talking about the pressure switch. if you are working with any empty system (which i assume you are) you shouldnt need to jump any wires on a properly evacuated system that is holding vac, and ready for a charge.
__________________
|
![]() |
![]() |
![]() |
#3 | |
Quote:
I attached the image of the part I'm questioning about from a thread I found online. I didn't want to revive an old thread. |
||
![]() |
![]() |
![]() |
Bookmarks |
|
|