injector resistor box install on 240sx? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Will fastback SE · 09-03-2004, 04:35 PM

Has anyone done this on their KA? I couldnt find enough of the individual 10ohm, 10watt resistors so I took the route suggested by several performance shops= install a resistor box from a honda. I have already mounted it and ran the 4 injector wires (output) to the power side of the injectors. What is left is wiring the last wire (input). According to the person i bought it from, that input wire is supposed to go where the plug is that splits the single injector wire into 4. Anyone know where that is? If you have done it before, please share, i need to get my damn car running. By the way, the reason I am doing this is because I have top feed 50lb injectors which are low inpedance and the stock injectors are high impedance

Powashiftin · 09-03-2004, 11:52 PM

I would like to know this as well.

also, which top feed fuel rail are you using?

nightwalker · 09-04-2004, 02:00 AM

just test the box with a multimeter and see if you have the right resistance. It's rather easy.

09-03-2004, 04:35 PM	#1
Will fastback SE Leaky Injector Join Date: Apr 2003 Location: Miami, Fl- U.S Age: 42 Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	injector resistor box install on 240sx? Has anyone done this on their KA? I couldnt find enough of the individual 10ohm, 10watt resistors so I took the route suggested by several performance shops= install a resistor box from a honda. I have already mounted it and ran the 4 injector wires (output) to the power side of the injectors. What is left is wiring the last wire (input). According to the person i bought it from, that input wire is supposed to go where the plug is that splits the single injector wire into 4. Anyone know where that is? If you have done it before, please share, i need to get my damn car running. By the way, the reason I am doing this is because I have top feed 50lb injectors which are low inpedance and the stock injectors are high impedance __________________ Donations for MORE boost accepted here

09-03-2004, 11:52 PM	#2
Powashiftin Zilvia Junkie Join Date: Dec 2002 Location: Northern NJ Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	I would like to know this as well. also, which top feed fuel rail are you using? __________________ http://www.tempusband.com

09-04-2004, 02:00 AM	#3
nightwalker Nissanaholic! Join Date: Mar 2003 Location: Bay area Age: 46 Posts: 2,146 Trader Rating: (0) Feedback Score: 0 reviews	just test the box with a multimeter and see if you have the right resistance. It's rather easy. __________________ In life, we often cast the line of hope fishing for the best possible opportunity. Sometimes with enough effort, the things we catch are nothing short of amazing.