Possibly blown KA24DE? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dempseybe · 12-21-2015, 08:33 AM

Hey guys, so I picked up a 92 s13 hatch with a rebuilt KA24DE with about 7200 on a fresh rebuild.

Car runs flawlessly except a minor coolant leak on the hose connected to the throttle body. We fixed the leak(thought so atleast)

Well, was on the interstate on my way to work. Car running great, all of a sudden notice a loss in power, first instinct is to look at tempature and sure enough it's over heating. Put it in neutral and go to the emergency lane and it stalls the minute it is out of gear. I allow it to cool down naturally and I insert coolant into radiator and try to start it. The belts and pulleys spin, but it sounds like absolutely no compression. Grabbed my compression check and checked compression in #3 and it read 0

Pretty much all I hear is a starter spinning and no sound of the motor compressing. Will do a more thorough compression check when it is home.

Dempseybe · 12-21-2015, 09:43 AM

Could use some feedback guys

RickBlaine · 12-21-2015, 10:19 AM

How much coolant did you have to add to the radiator? Don't say "a little" or "not much". Please try to quantify it....

A friend had a timing chain snap- with NO sound or rattle. It just went.

Did you check your oil level? Any contamination?

95_S14 · 12-21-2015, 10:32 AM

you can wait more then 1hr and 15 min for people to get back to you

kruked · 12-21-2015, 10:32 AM

Quote:

Originally Posted by Dempseybe

Could use some feedback guys

Give us some feedback on the other 3 cylinders. Jeez.
Have you bothered to look at your coolant and/or oil to see if it's mixed w/ the other?

You give us the run down of what happened but did you bother to check the basics first before starting this thread?

Dempseybe · 12-21-2015, 11:02 AM

I wasn't rushing. Was just adding that I'm looking for feedback. I couldn't do a check on the other 3 because the spark plug boots seperated from the plastic and was lodged in the sockets. The oil was darker than normal but not milky in anyway. The radiator was dry. But with the engine not making any sounds of combustion I didn't finish filling it up. So I'm assuming the radiator was empty. (The heat may have evaporated the rest)

Dempseybe · 12-21-2015, 11:03 AM

Once I tow it home I will be pulling the valve cover off to see if the chain snapped. Or if the valve is stuck open.

Dempseybe · 12-21-2015, 11:05 AM

Oh and to add to all of that. The pulleys are all still spinning, it seems to me that the engine isn't seized up, just isn't compressing. Any advice on other things I could check to see why there isn't any compression in that cylinder? If it were just a head gasket wouldn't I be seeing some sort of compression? Maybe a low 15 psi or less?

KAT-PWR · 12-21-2015, 11:27 AM

0 comp sounds like it's done
My piston with a brutal hole in the ring lands read 0, cyl 3 had the same thing but not quite as bad and I got 50psi (you can see said motor in my build thread)
Valve issues?
Unless it's something retarded like the chain broke but I have never seen that, not saying it can't happen but I've never seen it.

If I saw 0 comp I'd pull the motor out. Or if you wanna pull the head if a borescope is not available.

Dempseybe · 12-21-2015, 11:54 AM

Once I get it home I'll be able to update what the valve and chain situation is in. I'll keep you guys updated

Dempseybe · 12-21-2015, 12:24 PM

I'm about to say screw it and just buy an rb25det. #madskidz

zerodameaon · 12-21-2015, 02:02 PM

Next time pick one spot and post there. Also use the edit button to add on to your prior post.

Kingtal0n · 12-21-2015, 02:41 PM

freshly rebuild with 7500 miles... sounds about right

jedi03 · 12-21-2015, 04:49 PM

You can see if the piston is moving up and down with a light too

Dempseybe · 12-21-2015, 08:01 PM

Ok so I got it home, and pulled the plugs but the end of the wire boots melted to the socket. So I spent an hour and a half digging it out of cylinder 2. Ran a compression test and got 0 on #2. To save myself the trouble of getting #1 and #4 out I think it's safe to say they will read 0, and I'll pull the heads. The valves seem ok. I watched them all compress and depress with the cams moving. So maybe just a blown head gasket. I'll see once the heads are off

KAT-PWR · 12-21-2015, 08:39 PM

I'm going 80-20, 80% chance the skirts are blown out

fatduece · 12-21-2015, 09:33 PM

Sell the Ka to some hoonibro. DONT GET THE RB. It already gets enough bad rep from people that blown it up without doing any research. Get a 1j/2j.

kruked · 12-21-2015, 09:50 PM

Quote:

Originally Posted by fatduece

Get a 1j/2j.

More cylinders equal more problems. Can you imagine the OP w/ more cylinder problems? I mean shit, he started this useless thread for some "ideas" after he already knew that he had 0 compression in cylinder #3. It's not rocket science to just go ahead and check at least 1 more cylinder for compression to satisfy my taste.

fatduece · 12-22-2015, 05:24 PM

He's just a dreamer! Lol.

JAStirrett · 12-22-2015, 05:30 PM

Who rebuilt the motor, geez.

Matej · 12-22-2015, 05:47 PM

Quote:

Originally Posted by RickBlaine

How much coolant did you have to add to the radiator? Don't say "a little" or "not much". Please try to quantify it...

Three littles?

racepar1 · 12-22-2015, 08:12 PM

When I first saw this thread posted I thought to myself "boy, you would have to do something REALLY STUPID to blow up a KA". As it turns out I was right. I don't even get the point of the thread. I mean, if you KNOW you have 0 compression what possible advice could you expect from us? There is no miracle solution to 0 compression. Tear the engine apart and see what you screwed up with your ignorance.

Dropping an RB in is a GREAT idea, I say go for it. Then we could start a pool for how long it will take you to overheat the crap out of it and cook that one too. Since RB's in S-chasis are notorious for cooling issues, it shouldn't take long.

Also, delete your coolant temp gauge for weight savings. It seems you never bother to look at it anyways!

cotbu · 12-23-2015, 03:26 PM

You know how much boost you can run with zero compression?
Not enough![emoji24]

jumboflan · 12-23-2015, 04:36 PM

. Did you see the temps rise? Did you have water radiator fluid in the car? You could've turned the heat all the way to high. And prevented head gasket failure

kyral · 12-24-2015, 06:07 PM

my experience with KA's is once they over heat, its a warped cylinder head maybe more especially if its losing power and dieing after overheating

The excessive heat could also cause the rings to expand and if there wasnt enough end gap on the rings this could force them outwars into the cylinder walls causing some cylinder and ring damage

how far up did the temp gauge go? regardless the cylinder heads gotta come off at the least if you have no compression

pretty much what everybody has already said just giving a +1

12-21-2015, 11:27 AM	#9
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	0 comp sounds like it's done My piston with a brutal hole in the ring lands read 0, cyl 3 had the same thing but not quite as bad and I got 50psi (you can see said motor in my build thread) Valve issues? Unless it's something retarded like the chain broke but I have never seen that, not saying it can't happen but I've never seen it. If I saw 0 comp I'd pull the motor out. Or if you wanna pull the head if a borescope is not available. __________________ MRP Manufacturing

12-21-2015, 08:39 PM	#16
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	I'm going 80-20, 80% chance the skirts are blown out __________________ MRP Manufacturing

12-22-2015, 05:30 PM	#20
JAStirrett Zilvia Member Join Date: Jan 2011 Location: Riverview FL Posts: 189 Trader Rating: (0) Feedback Score: 0 reviews	Who rebuilt the motor, geez. __________________ The addiction is real...

12-23-2015, 03:26 PM	#23
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 50 Posts: 3,318 Trader Rating: (3) Feedback Score: 3 reviews	You know how much boost you can run with zero compression? Not enough![emoji24] __________________ LoverTechnologies "Half Broken Things!"

12-23-2015, 04:36 PM	#24
jumboflan Zilvia Junkie Join Date: Jun 2008 Location: San Francisco Age: 43 Posts: 327 Trader Rating: (2) Feedback Score: 2 reviews	. Did you see the temps rise? Did you have water radiator fluid in the car? You could've turned the heat all the way to high. And prevented head gasket failure __________________ Im immune to bullshit....so put your shovel away.

12-21-2015, 08:33 AM	#1
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Possibly blown KA24DE? Hey guys, so I picked up a 92 s13 hatch with a rebuilt KA24DE with about 7200 on a fresh rebuild. Car runs flawlessly except a minor coolant leak on the hose connected to the throttle body. We fixed the leak(thought so atleast) Well, was on the interstate on my way to work. Car running great, all of a sudden notice a loss in power, first instinct is to look at tempature and sure enough it's over heating. Put it in neutral and go to the emergency lane and it stalls the minute it is out of gear. I allow it to cool down naturally and I insert coolant into radiator and try to start it. The belts and pulleys spin, but it sounds like absolutely no compression. Grabbed my compression check and checked compression in #3 and it read 0 Pretty much all I hear is a starter spinning and no sound of the motor compressing. Will do a more thorough compression check when it is home.

12-21-2015, 09:43 AM	#2
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Could use some feedback guys

12-21-2015, 10:19 AM	#3
RickBlaine Join Date: Jul 2013 Location: Chicago Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	How much coolant did you have to add to the radiator? Don't say "a little" or "not much". Please try to quantify it.... A friend had a timing chain snap- with NO sound or rattle. It just went. Did you check your oil level? Any contamination? __________________ 1991 Nissan 240sx Fastback - BLACK 104K miles June 2016, Auto trans

12-21-2015, 10:32 AM	#4
95_S14 Post Whore! Join Date: Oct 2009 Location: Ca Posts: 5,923 Trader Rating: (108) Feedback Score: 108 reviews	you can wait more then 1hr and 15 min for people to get back to you __________________ Www.PowerAutosports.com

12-21-2015, 11:02 AM	#6
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	I wasn't rushing. Was just adding that I'm looking for feedback. I couldn't do a check on the other 3 because the spark plug boots seperated from the plastic and was lodged in the sockets. The oil was darker than normal but not milky in anyway. The radiator was dry. But with the engine not making any sounds of combustion I didn't finish filling it up. So I'm assuming the radiator was empty. (The heat may have evaporated the rest)

12-21-2015, 11:03 AM	#7
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Once I tow it home I will be pulling the valve cover off to see if the chain snapped. Or if the valve is stuck open.

12-21-2015, 11:05 AM	#8
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Oh and to add to all of that. The pulleys are all still spinning, it seems to me that the engine isn't seized up, just isn't compressing. Any advice on other things I could check to see why there isn't any compression in that cylinder? If it were just a head gasket wouldn't I be seeing some sort of compression? Maybe a low 15 psi or less?

12-21-2015, 11:54 AM	#10
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Once I get it home I'll be able to update what the valve and chain situation is in. I'll keep you guys updated

12-21-2015, 12:24 PM	#11
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	I'm about to say screw it and just buy an rb25det. #madskidz

12-21-2015, 02:41 PM	#13
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 42 Posts: 4,829 Trader Rating: (17) Feedback Score: 17 reviews	freshly rebuild with 7500 miles... sounds about right

12-21-2015, 04:49 PM	#14
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,842 Trader Rating: (8) Feedback Score: 8 reviews	You can see if the piston is moving up and down with a light too

12-21-2015, 08:01 PM	#15
Dempseybe Leaky Injector Join Date: Dec 2015 Location: Biloxi ms Age: 31 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Ok so I got it home, and pulled the plugs but the end of the wire boots melted to the socket. So I spent an hour and a half digging it out of cylinder 2. Ran a compression test and got 0 on #2. To save myself the trouble of getting #1 and #4 out I think it's safe to say they will read 0, and I'll pull the heads. The valves seem ok. I watched them all compress and depress with the cams moving. So maybe just a blown head gasket. I'll see once the heads are off

12-21-2015, 09:33 PM	#17
fatduece Zilvia Addict Join Date: Apr 2011 Location: hoonigay Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	Sell the Ka to some hoonibro. DONT GET THE RB. It already gets enough bad rep from people that blown it up without doing any research. Get a 1j/2j.

12-22-2015, 05:24 PM	#19
fatduece Zilvia Addict Join Date: Apr 2011 Location: hoonigay Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	He's just a dreamer! Lol.

12-22-2015, 08:12 PM	#22
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	When I first saw this thread posted I thought to myself "boy, you would have to do something REALLY STUPID to blow up a KA". As it turns out I was right. I don't even get the point of the thread. I mean, if you KNOW you have 0 compression what possible advice could you expect from us? There is no miracle solution to 0 compression. Tear the engine apart and see what you screwed up with your ignorance. Dropping an RB in is a GREAT idea, I say go for it. Then we could start a pool for how long it will take you to overheat the crap out of it and cook that one too. Since RB's in S-chasis are notorious for cooling issues, it shouldn't take long. Also, delete your coolant temp gauge for weight savings. It seems you never bother to look at it anyways!

12-24-2015, 06:07 PM	#25
kyral Zilvia Junkie Join Date: Nov 2012 Location: wisconsin Age: 33 Posts: 450 Trader Rating: (7) Rides Gallery: kyral Feedback Score: 7 reviews	my experience with KA's is once they over heat, its a warped cylinder head maybe more especially if its losing power and dieing after overheating The excessive heat could also cause the rings to expand and if there wasnt enough end gap on the rings this could force them outwars into the cylinder walls causing some cylinder and ring damage how far up did the temp gauge go? regardless the cylinder heads gotta come off at the least if you have no compression pretty much what everybody has already said just giving a +1