![]() |
|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Member
![]() Join Date: Jul 2006
Location: Aurora, CO
Age: 35
Posts: 167
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Sr20det misfire/hesitation under 4k rpm
Above 4k rpm she rips hard no stuttering/misfire/hesitation, below 4k rpms it does all of that. Swapped a new o2 sensor(oem) and new spark plugs (bkr6e). looked over for boost leaks as well found none. I Just imported the car 90 180sx so im finding all the mods as i dig in. Where should i start next
Here's what i know it has so far. Swapped to a red top SR z32 maf Trust FMIC Power enterprise turbo 3" turbo back exhaust Has a different ecu from "Technical shop ADVANCE original SPL ROM MT2000 real time rom emulator map tracer" |
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Join Date: Sep 2013
Location: Oc California
Age: 34
Posts: 25
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Try checking all of your coil packs with a multimeter.
I recently had an issue on a ka24de with those symptoms, drove fine for me above 3K but horrible misfire/bogging under that. Turns out my ignition coil resistance tested bad, despite plugs still sparking.
__________________
|
![]() |
![]() |
![]() |
#3 |
Zilvia Member
![]() Join Date: Jul 2006
Location: Aurora, CO
Age: 35
Posts: 167
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Got the issue resolved. It was either my maf or knock sensor/harness. Replaced my z32 maf with a known working one and also a put a new oem KS and wiring specialties harness.
|
![]() |
![]() |
![]() |
#4 |
Post Whore!
![]() |
Generally those are Maf related issues. Try cleaning the old one and swapping it back in.
__________________
*My SR20VET* Does your VTC gear rattle in your S14/15 SR? PM me. |
![]() |
![]() |
![]() |
Bookmarks |
|
|