CA For sale 1996 Nissan S14 $25K OBO

[blackzrd]

For sale 1996 Nissan S14

Engine KA2.4 DOHC Turbo

Up for sale is my project 240 SX “Yes this is the DSPORT Magazine Project S14”

I have owned this car for the past 5 years or so and have enjoyed the project very much, I no longer have a place to keep it and need the extra space in my garage. The car is currently setup as a Street/Drag car, with a few minor changes this setup can be changed to accommodate road racing or drifting.

I’m not in a rush to get rid of it or part it out. However the car will be parted out if it dose not sale by a certain date I have set.

$25K OBO

Best E.T. 10.6 at 147MPH

Best HP 687 @ 30PSI

***Note the current long block has less than 100 miles and has not been tuned. With this new setup the engine should be able to support 800+. New long block have not been tuned***


Cylinder Head
• Port Flow Design: Race Port & Polish
• Super Tech: Black Nitrided Intake Valves
• Super Tech: Black Nitrided Exhaust Valves
• Super Tech: Titanium Retainers
• Super Tech: Intake & Exhaust Cam Follower “Bucket Over Shim DLC Coated”
• Cosworth: 91mm Head gasket
• Brian Crower: 272°/272° Camshafts
• Xcessive Manufacturing: Intake Manifold
• Skunk 2: 72mm Honda B Series Throttle Body

Short Block

KA2.4 DE

Machined and assembled by DSPORT Magazine “ Club DSPORT”
• JE: 90.0 mm 9.5:1
• ARP: CA625 11mm Head studs
• Eagle Rods: H-Beam CRS6496NXD Rated to 1200 HP
• Xcessive Manufacturing: Oil pan adaptor
• Tomei: Lower oil pan
• ATI: Super Damper

Turbo System
• Garrett: GTX 35/82R
• Wisecraft Fabrication: Custom top mount manifold “Divided” Garrett/ATP V-Band
• Wisecraft Fabrication: Custom Downpipe
• Wisecraft Fabrication: Custom IC Piping
• Turbo Smart: 38mm Wastegate
• Turbo Smart: BOV
• Greddy: Intercooler 5.5” Thick / 24” Wide / 12” Tall

Drive Train
• Jim Wolf Technology: 6-Speed Transmission adaptor
• Jim Wolf Technology: 6-Speed Transmission Clutch Kit
• 2007 CD009 Transmission
• Driveshaft Shop: Custom Aluminum Driveshaft
• Driveshaft Shop: Level 5 900 HP Rated Axles
• Quaife: QDF7L ATB Helical LSD “ R200 Housing”

Interior
• Sparco: EVO II Seats
• Sparco: Seat Rails

Exterior
• Custom Mixed Blue Paint PPG
• 6666 Customs / Rocker Bunny Version 1 kit “Stock Rear Quarter Panels”
• Enkei 17” RPF1

Fuel System
• Fuel Injector Clinic: 2150cc Injectors
• Walbro: 2 F90000267 E85 Compatible
• Power house Racing: Fuel Hat
• AEM: Fuel Rail
• Earl’s: Dual stage fuel filters
• Earl’s: Pro lite Hose
• Earls’: AN Fittings

Suspension
• Apexi: N1-Pro Full Coilovers “If Yor Know You Know”
• Circuit Sports: Front Lower Control Arms
• Tein: Inner Tie Rod
• Tein: Outer Tie Rod
• Circuit Sports: Rear Upper Control Arms
• Circuit Sports: Rear Toe Rods
• Circuit Sports: Rear Lower Control Arms
• HKB: Extended wheel studs

Brakes
• Wilwood: 4 Piston Front Big Brake Calipers
• Wilwood: 12.88” 2 piece rotors
• Powerslot: Rear rotors

Electronics
• AEM Electronics: Infinity 6
• AEM Electronics: Boost Control Solenoid
• AEM Electronics: AQ1
• AEM Electronics: 4-Channel K-Type EGT Amplifier
• AEM Electronics: Map Sensor
• AEM Electronics: Fuel Pressure Sensor
• AEM Electronics: Air Intake Sensor
• AEM Electronics: O2 Sensors “1 Per runner”
• AEM Electronics: Exhaust Back Pressure Sensor Kit
• RYWIER: Full Custom Engine Harness
• GM: Flex Fuel Sensor

Misc:
• Xcessive Manufacturing: Motor Mounts
• Wisecraft Fabrication: Custom Catch Can
• Greddy: Radiator Breather Tank
• Apexi: GT Spec Cat Back


I’m sure I am missing a few things but this is what I can remember off the top of my head. If you have any questions pleas send me a PM.

Thank you,

[Z32TwinTurbo]

For 25k it should be tuned. Other than that awesome car!

[rawgarage]

25k and still KA ...... Pride

[blackzrd]

Originally Posted by Z32TwinTurbo

For 25k it should be tuned. Other than that awesome car!

This new long block is the same set up that was in the car when it was making 687whp. All of the part in the engine are new, I have upgraded to 11mm head studs, that is the only difference. I have an old map tuned on wastegate the way the infinity is set up that tune will be fine.

If someone is really interested in buying it I can arrange for it to be tuned

[blackzrd]

Originally Posted by rawgarage

25k and still KA ...... Pride

I am proud I don't see many KA's let alone making almost 700HP
This car is capable of a 9second pass on a drag radials in full street trim.

[tootall4la]

Is this the D'Garage car? Looks awfully familiar... Anyways great looking car! GLWS


Sent from my iPhone using Tapatalk

[boback1]

smh..some people don't know what it cost to build a car of this caliber. beautiful car bro. .The parts you have, all the time put into it,and nothing half assed, it's worth every penny. I miss my ka-t, it made 710 hp and suprised everyone one i beat.

[blackzrd]

Originally Posted by tootall4la

Is this the D'Garage car? Looks awfully familiar... Anyways great looking car! GLWS


Sent from my iPhone using Tapatalk

It is.. Thank you for the kind words

[Maxstyle]

Very clean. Reminds me of when this was for sale. http://forums.nasioc.com/forums/show....php?t=2270019