Horn not working on new QR wheel setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

1993fdrx7 · 03-04-2017, 10:04 AM

I have an s14 that had a fully functioning horn prior to me going to a qr setup.

I am running an nrg slim hub, nrg 2.8 qr, and a real nardi classic with nardi two pring horn button. I have reverses the wires on the horn button but that did not resolve the issue.

I cannot imagine this can be that complicated. What should I be checking?

Thanks in advance

rawgarage · 03-06-2017, 01:35 AM

I had this happen on my Z....if you go on YouTube I took everything off and did it step by step......fixed it

tuzzio · 03-06-2017, 08:02 AM

I can't remember exactly but I vaguely remember in my s13 cutting one wire from the OEM connector and connecting it to a pin with a female connector.

Nismoboy1992 · 03-19-2017, 10:35 PM

There is a green wire if I remember right that goes to a connector on the backside of your clockspring, you need to run a wire to that. otherwise you have an open right there and when you press the horn button, it won't ground out and never reaches the horn.

03-04-2017, 10:04 AM	#1
1993fdrx7 Zilvia Addict Join Date: Jun 2012 Location: salmon river Age: 38 Posts: 865 Trader Rating: (32) Feedback Score: 32 reviews	Horn not working on new QR wheel setup I have an s14 that had a fully functioning horn prior to me going to a qr setup. I am running an nrg slim hub, nrg 2.8 qr, and a real nardi classic with nardi two pring horn button. I have reverses the wires on the horn button but that did not resolve the issue. I cannot imagine this can be that complicated. What should I be checking? Thanks in advance

03-06-2017, 01:35 AM	#2
rawgarage Banned from the Marketplace Join Date: Oct 2007 Location: h o u s t o n Age: 36 Posts: 5,986 Trader Rating: (75) Feedback Score: 75 reviews	I had this happen on my Z....if you go on YouTube I took everything off and did it step by step......fixed it

03-06-2017, 08:02 AM	#3
tuzzio Post Whore! Join Date: Oct 2013 Location: Western Mass. Posts: 2,649 Trader Rating: (3) Feedback Score: 3 reviews	I can't remember exactly but I vaguely remember in my s13 cutting one wire from the OEM connector and connecting it to a pin with a female connector.

03-19-2017, 10:35 PM	#4
Nismoboy1992 Leaky Injector Join Date: Aug 2013 Location: Louisville Posts: 118 Trader Rating: (3) Feedback Score: 3 reviews	There is a green wire if I remember right that goes to a connector on the backside of your clockspring, you need to run a wire to that. otherwise you have an open right there and when you press the horn button, it won't ground out and never reaches the horn.