Top mount exhaust - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Sr20probs · 08-21-2017, 05:47 AM

Hey guys I thought I could make my own but it's a pain. Anyone know where I can get an full exhaust for a top mount gt2871r on my 93 240sx. I rather not deal with bullshit and just bolt I up. Its a top mount gt2871r I just can't seem to get an exhaust for this thing. I know ton of people do it so just curious what I need to do. Thanks

RalliartRsX · 08-21-2017, 05:55 AM

Every setup is different and I am not sure anyone makes a full bolt up solution. There will be some fab work involved.

Once you get a downpipe then the rest should be cake. Just buy a downpipe which is close to fitting, chop it up and extend/angle/etc as you need.

Sr20probs · 08-21-2017, 06:10 AM

I have the down pipe bolted up with a flex pipe but I lm going to remove the flex pipe since it leaks. I guess I'll just take the flex pipe off and work from the downpipe back. It's actually more of a pain than you think getting it sit high enough

RalliartRsX · 08-21-2017, 06:14 AM

Just clamp a couple pipes together and drive it to an exhaust shop (or trailer it). Much easier, less time consuming and less of a pain than trying to cobble (especially your first if so) one together.

By the time you buy material. etc, and spend all the time, someone could have been done in a few hours.

Sr20probs · 08-21-2017, 06:36 AM

That's a good idea actually my buddy works at an exhaust shop mine as well do that. I appreciate the help man. I'll let you know how it goes!

08-21-2017, 05:47 AM	#1
Sr20probs Zilvia Member Join Date: May 2015 Location: Massachusetts Age: 29 Posts: 166 Trader Rating: (1) Feedback Score: 1 reviews	Top mount exhaust Hey guys I thought I could make my own but it's a pain. Anyone know where I can get an full exhaust for a top mount gt2871r on my 93 240sx. I rather not deal with bullshit and just bolt I up. Its a top mount gt2871r I just can't seem to get an exhaust for this thing. I know ton of people do it so just curious what I need to do. Thanks

08-21-2017, 05:55 AM	#2
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,793 Trader Rating: (32) Feedback Score: 32 reviews	Every setup is different and I am not sure anyone makes a full bolt up solution. There will be some fab work involved. Once you get a downpipe then the rest should be cake. Just buy a downpipe which is close to fitting, chop it up and extend/angle/etc as you need.

08-21-2017, 06:10 AM	#3
Sr20probs Zilvia Member Join Date: May 2015 Location: Massachusetts Age: 29 Posts: 166 Trader Rating: (1) Feedback Score: 1 reviews	I have the down pipe bolted up with a flex pipe but I lm going to remove the flex pipe since it leaks. I guess I'll just take the flex pipe off and work from the downpipe back. It's actually more of a pain than you think getting it sit high enough

08-21-2017, 06:14 AM	#4
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,793 Trader Rating: (32) Feedback Score: 32 reviews	Just clamp a couple pipes together and drive it to an exhaust shop (or trailer it). Much easier, less time consuming and less of a pain than trying to cobble (especially your first if so) one together. By the time you buy material. etc, and spend all the time, someone could have been done in a few hours.

08-21-2017, 06:36 AM	#5
Sr20probs Zilvia Member Join Date: May 2015 Location: Massachusetts Age: 29 Posts: 166 Trader Rating: (1) Feedback Score: 1 reviews	That's a good idea actually my buddy works at an exhaust shop mine as well do that. I appreciate the help man. I'll let you know how it goes!