NJ Racing Hart C5 3piece 17x8? 17x9.5? 4/5x114.3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

markhit · 01-29-2018, 05:15 PM

- Brand/Model: Racing Hart C5 3piece
- Bolt Pattern: 4/5x114.3
- Front: 17x8?
- Rear: 17x9.5
- Color Finish: Silver
- Price: $1,000

For sale are my Racing Hart C5 3piece wheels, they are multilug, so 4/5x114.3, they are 17in, I believe the rears are 17x9.5 and the front seems like they’re 17x8, the sizing and offset is unknown lol, I can check when they actually come off the car.

They are in very good condition overall, one of the front lips are bent though, but being it’s 3 piece and the front specs are weak, figure someone would relip them anyway.

The tires are in good condition overall as well.

I can get more pictures of the wheels

Asking $1,000 obo + shipping. Buyer pays shipping
I can shipbu greyhound so it would be a ton cheaper, about $100 on the expensive side. Would have to just pick them up from your closest station.

markhit · 01-31-2018, 09:18 AM

Need gone, someone make an offer!

markhit · 02-01-2018, 02:56 PM

Someone make and offer!

zoo · 02-01-2018, 03:45 PM

On these the lips and barrels are welded together.

markhit · 02-01-2018, 05:56 PM

Quote:

Originally Posted by zoo

On these the lips and barrels are welded together.

Are they really? If I’m gonna be honest I had no clue and this is new to me lol. I was told they were 3 piece. So now they’re a 2 piece

zoo · 02-02-2018, 08:55 AM

Yeah. But its a common practice, SSR, Enkei, Stern, Starform, etc all have models that are assembled as 3 piece and then lip/barrel are welded togerther.

markhit · 02-02-2018, 12:37 PM

Quote:

Originally Posted by zoo

Yeah. But its a common practice, SSR, Enkei, Stern, Starform, etc all have models that are assembled as 3 piece and then lip/barrel are welded togerther.

That’s pretty lame, feel like it should be a requested thing. Eh it’s whatever though. Thanks for the info!

markhit · 02-05-2018, 06:02 PM

Need gone. Someone offer up!

markhit · 02-07-2018, 08:53 AM

Up. No longer need or want

markhit · 02-09-2018, 05:10 PM

Someone make an offer. Have no need for them!

markhit · 02-12-2018, 05:36 PM

Bump to the top

TheRealSy90 · 02-12-2018, 05:57 PM

WheelFlip and JordanInnovations can make these into true 3-Piece.

markhit · 02-15-2018, 12:10 PM

Quote:

Originally Posted by TheRealSy90

WheelFlip and JordanInnovations can make these into true 3-Piece.

Thanks for the info!

GenkiZenki808 · 02-25-2018, 01:32 AM

I think I have center caps for these laying around somewhere if you’re
Interested in buying them

Delrio916 · 10-19-2018, 04:07 PM

Offsets would help you sell them ! I need to know Offset. I took a picture in selfe mode to find mine....

its right on one of the spokes

01-29-2018, 05:15 PM	#1
markhit Join Date: Oct 2012 Location: new jersey Age: 31 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Racing Hart C5 3piece 17x8? 17x9.5? 4/5x114.3 - Brand/Model: Racing Hart C5 3piece - Bolt Pattern: 4/5x114.3 - Front: 17x8? - Rear: 17x9.5 - Color Finish: Silver - Price: $1,000 For sale are my Racing Hart C5 3piece wheels, they are multilug, so 4/5x114.3, they are 17in, I believe the rears are 17x9.5 and the front seems like they’re 17x8, the sizing and offset is unknown lol, I can check when they actually come off the car. They are in very good condition overall, one of the front lips are bent though, but being it’s 3 piece and the front specs are weak, figure someone would relip them anyway. The tires are in good condition overall as well. I can get more pictures of the wheels Asking $1,000 obo + shipping. Buyer pays shipping I can shipbu greyhound so it would be a ton cheaper, about $100 on the expensive side. Would have to just pick them up from your closest station.

01-31-2018, 09:18 AM	#2
markhit Join Date: Oct 2012 Location: new jersey Age: 31 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Need gone, someone make an offer!

02-01-2018, 02:56 PM	#3
markhit Join Date: Oct 2012 Location: new jersey Age: 31 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Someone make and offer!

02-01-2018, 03:45 PM	#4
zoo Zilvia Member Join Date: Oct 2011 Location: Dallas, TX Posts: 167 Trader Rating: (1) Feedback Score: 1 reviews	On these the lips and barrels are welded together.

02-02-2018, 08:55 AM	#6
zoo Zilvia Member Join Date: Oct 2011 Location: Dallas, TX Posts: 167 Trader Rating: (1) Feedback Score: 1 reviews	Yeah. But its a common practice, SSR, Enkei, Stern, Starform, etc all have models that are assembled as 3 piece and then lip/barrel are welded togerther.

02-05-2018, 06:02 PM	#8
markhit Join Date: Oct 2012 Location: new jersey Age: 31 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Need gone. Someone offer up!

02-07-2018, 08:53 AM	#9
markhit Join Date: Oct 2012 Location: new jersey Age: 31 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Up. No longer need or want

02-09-2018, 05:10 PM	#10
markhit Join Date: Oct 2012 Location: new jersey Age: 31 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Someone make an offer. Have no need for them!

02-12-2018, 05:36 PM	#11
markhit Join Date: Oct 2012 Location: new jersey Age: 31 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Bump to the top

02-25-2018, 01:32 AM	#14
GenkiZenki808 Zilvia Junkie Join Date: Jun 2012 Location: Hawaii Posts: 477 Trader Rating: (13) Feedback Score: 13 reviews	I think I have center caps for these laying around somewhere if you’re Interested in buying them

10-19-2018, 04:07 PM	#15
Delrio916 Join Date: Oct 2018 Location: Sacramento Ca Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Offsets would help you sell them ! I need to know Offset. I took a picture in selfe mode to find mine.... its right on one of the spokes