What should my expectations be of this setup? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

turbo_dreams · 03-05-2008, 10:09 PM

Garret T25 turbo t2 flange internal wastegate
ka24de BOTTOM MOUNT MANIFOLD
T25/T28 DIVORCED Elbow
3" down pipe ka/sr
Oil drain / oil feed oil line kit t25/t28 turbo charger
90 degree an fitting for oil pan
T25 inlet pipe
Cone filter
30x12x3 intercooler
2.25 sr20 hot intercooler pipe
2.5 cold side pipes
Tee fitting for oil feed
Silicone couplers
t- bolt clamps
Bee-r discontinued blow off valve
warbro 255
adj fuel pressure regulator 1:1 on boost ratio w/ gauge
sr 370cc side feed injectors
Greddy e-manage blue
Apex 3 inch n1
Excedy 4 puck clutch

.......Is what i'm currently working on for my ka24de, just wanted to know what hp/tq #'s you guys think i can pull off and if i am a good driver with drag radials what time on the 1/4 mile might i see. Thanks

p.s, if anyone has any of those parts for sale please lmk through here or p.m. Thanks

burnsauto · 03-05-2008, 10:14 PM

hey gotti, stop typing in blue. lol

it all depends on your tune really....and as for times..just get down to englishtown one weekend and find out !! lol

good luck.

nismo tuned s14 · 03-05-2008, 10:25 PM

arent those injectors only good for around 220hp? someone correct me if im wrong. but if thats right, you shouldnt get much more power than that.

McRussellPants · 03-05-2008, 11:51 PM

220hp 250tq.

somewhere around in that area.

Addicted2Kouki · 03-05-2008, 11:56 PM

if youre doing 1/4 mile runs... go big or go home.

mcrussellpants already answered the question.

turbo_dreams · 03-06-2008, 08:08 AM

Quote:

Originally Posted by burnsauto

hey gotti, stop typing in blue. lol

it all depends on your tune really....and as for times..just get down to englishtown one weekend and find out !! lol

good luck.

Sorry, and i'll be heading to island dragway this sunday and next wens or friday off to englishtown to see how slow i am stock

, i'll be satisfied with a 16.4. Thanks

And as far as 220hp being the limit for 370's i really hope that isn't true, this guy on nico is giving me alot of motivation, made 234hp @ 215 lbs of tq on 6lb's and slipping clutch, i hope with 10/12 lb's i can get at least 250, my goal being 270...and if 370's are only good for 220hp is true, then who wants to buy 370's off me? lol

turbo_dreams · 03-06-2008, 08:10 AM

Quote:

Originally Posted by Addicted2Kouki

if youre doing 1/4 mile runs... go big or go home.

mcrussellpants already answered the question.

Being 17 with a part time job and still in high school with a 35r is just humanly wrong. Someday though

Monooxide · 03-06-2008, 08:16 AM

370s only make 220HP on a 2.4L? Yea....OK...

370s on an SR can easily produce 260-270WHP. They may be 100% duty cycle. But they definately will produce more than 220WHP.

I would say 12 pounds on SR T25 with that setup and a decent/good tune will produce easily 250WHP.

http://www.ka-t.org/forums/viewtopic.php?t=31490

turbo_dreams · 03-06-2008, 11:30 AM

Quote:

Originally Posted by Monooxide

370s only make 220HP on a 2.4L? Yea....OK...

370s on an SR can easily produce 260-270WHP. They may be 100% duty cycle. But they definately will produce more than 220WHP.

I would say 12 pounds on SR T25 with that setup and a decent/good tune will produce easily 250WHP.

http://www.ka-t.org/forums/viewtopic.php?t=31490

Wow, thanks for the good hopes =)

03-05-2008, 10:09 PM	#1
turbo_dreams Zilvia FREAK! Join Date: Nov 2006 Location: queens, n.y Age: 34 Posts: 1,333 Trader Rating: (9) Feedback Score: 9 reviews	What should my expectations be of this setup? Garret T25 turbo t2 flange internal wastegate ka24de BOTTOM MOUNT MANIFOLD T25/T28 DIVORCED Elbow 3" down pipe ka/sr Oil drain / oil feed oil line kit t25/t28 turbo charger 90 degree an fitting for oil pan T25 inlet pipe Cone filter 30x12x3 intercooler 2.25 sr20 hot intercooler pipe 2.5 cold side pipes Tee fitting for oil feed Silicone couplers t- bolt clamps Bee-r discontinued blow off valve warbro 255 adj fuel pressure regulator 1:1 on boost ratio w/ gauge sr 370cc side feed injectors Greddy e-manage blue Apex 3 inch n1 Excedy 4 puck clutch .......Is what i'm currently working on for my ka24de, just wanted to know what hp/tq #'s you guys think i can pull off and if i am a good driver with drag radials what time on the 1/4 mile might i see. Thanks p.s, if anyone has any of those parts for sale please lmk through here or p.m. Thanks __________________ www.tm-spl.com Kouki's & some apple juice.

03-05-2008, 10:14 PM	#2
burnsauto Post Whore! Join Date: Dec 2006 Location: 717, PA Age: 39 Posts: 3,324 Trader Rating: (6) Rides Gallery: burnsauto Feedback Score: 6 reviews	hey gotti, stop typing in blue. lol it all depends on your tune really....and as for times..just get down to englishtown one weekend and find out !! lol good luck. __________________

03-05-2008, 10:25 PM	#3
nismo tuned s14 Zilvia Junkie Join Date: Jun 2004 Location: Nashville Age: 37 Posts: 425 Trader Rating: (2) Feedback Score: 2 reviews	arent those injectors only good for around 220hp? someone correct me if im wrong. but if thats right, you shouldnt get much more power than that.

03-05-2008, 11:51 PM	#4
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	220hp 250tq. somewhere around in that area.

03-06-2008, 08:16 AM	#8
Monooxide Zilvia Addict Join Date: Mar 2005 Location: Farmington/Flint, MI Age: 37 Posts: 675 Trader Rating: (8) Feedback Score: 8 reviews	370s only make 220HP on a 2.4L? Yea....OK... 370s on an SR can easily produce 260-270WHP. They may be 100% duty cycle. But they definately will produce more than 220WHP. I would say 12 pounds on SR T25 with that setup and a decent/good tune will produce easily 250WHP. http://www.ka-t.org/forums/viewtopic.php?t=31490