CA RSR-EXmag Catback s13. like new

[r20crazy]

PRICE LOWERED

$500 OBO Pickup in 90501. Will ship for extra but wont be cheap PM if interested

I bought this about 10 years ago used and was installed on my s13 ka24de ever since and didn't get pulled over once due to noise or modified exhaust as it looks stockish (your results may vary). this is Very hard to find in this condition. only very minor scrape as shown in pic, otherwise no damage/dents/holes. the small brace that is cracked on muffler will be professionally re-tig welded b4 sale. this unit is full stainless 3 inches. 4 new gaskets included from P2M (only 2 needed for install). The tip was professionally modified/extended by prior owner to better fit their body kit, and was extended with the use of a v-band clamp. With stock bumper tip stuck out to far for my liking so I just machined a silencer/cap and used the v-band to hold it in place. SEE PICS
Buyer will need to source a new v-band clamp for tip/cap as it broke

Please PM for any questions as not on here much anymore since sold car.
Not looking for any trades unless you have 4 new truck tires in size 265/60/18

More pics avaliable if needed.

I CAN have the v-band addition removed and tip professionally rewelded (TIG) back to stock location, but before this would be done I'd require full payment for the system (and shipping if required) and need about a week b4 it would be ready to ship or picked-up.

[Motormouth759]

Man if this didn’t have a modified tip I would have been a buyer

[r20crazy]

it would be fairly easy to have v-band and extension cutoff and re tig to stock. i think about 3 inches was added, but idk as was like this when purchased.

[r20crazy]

bump. Price lowered to $500.

Have a great 4th of july

[nisileighty]

Never thought I?d see one of these for sale again. Wish I still had my old one. Glws!

[Motormouth759]

Originally Posted by nisileighty

Never thought I?d see one of these for sale again. Wish I still had my old one. Glws!

I?ve been looking for one for a while. If this one didn?t have that v band on it I would have bought it.

[r20crazy]

for those interested....

I CAN have the v-band addition removed and tip professionally rewelded (TIG) back to stock location, but before this would be done I'd require full payment for the system (and shipping if required) and need about a week b4 it would be ready to ship or picked-up.

Adding this info to OP.

[TheRealSy90]

Hows the ground clearance on this unit?

[r20crazy]

Ran the setup on 5zigen lowering springs (about 2 inch drop) for over 10 years on the crappy socal roads and only rubbed the can a handful of times (see pic) going into steep driveways. Always caught the aftermarket rear subframe connector bars b4 the exhaust so I'd say it was great

[r20crazy]

still available

[r20crazy]

bump. lets get this sold.

[r20crazy]

will consider offers for local pickup on this

[r20crazy]

CASH offers considered. just collecting dust.

[Motormouth759]

sent you a pm