S13 flush rims - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JamesC89 · 03-20-2002, 03:19 PM

Does anybody know of any rims that would have the right offset to look flush on an S13?  Preferably light, under $200 a piece, and available in gunmetal/black.  Am I just looking at the wrong numbers or will a 7" wide wheel with a +40mm offset not look flush with the fender?

DuffMan · 03-20-2002, 03:23 PM

7" with a +40 offset would look a few mm further out than stock.

Tenzo R makes a lot of nice looking black/gunmetal wheels, and they're pretty cheap on wheelmax. I dont know if they're light or not though.

JamesC89 · 03-20-2002, 03:38 PM

I want the Kosei K1s from Tire Rack soo bad but do they offer them in Gunmetal and at the right offset?  (thought i'd ask because i thought i read that you were looking at them)

DuffMan · 03-20-2002, 03:55 PM

Nope, I've spent a lot of time on the phone with Tire Rack and the short answer is no you can't get them in gunmetal for the S13.

JamesC89 · 03-20-2002, 04:02 PM

Well CRAP!  What else is there then?

*LanceS13* · 03-20-2002, 05:12 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (DuffMan @ Mar. 21 2002,3:23)</td></tr><tr><td id="QUOTE">7" with a +40 offset would look a few mm further out than stock.</td></tr></table><span id='postcolor'>
+40 was set the wheel more inward...+30, maybe less, would be better for a flush look with 7" wheels.  The thinner the wheel, the more you want to push it out for a flush look, so the less offset you want.

DJ Machine · 03-20-2002, 09:04 PM

Has anyone here dealt with wheelmax?

Im looking for wheels right now as well, im stuck between 3 wheels;

Enkei RSF-2
Racing Hart C2
5zigen Copse

it's out of those 3, theres pics of all 3 wheels at wheelmax or autimaging.

DuffMan · 03-21-2002, 02:57 AM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (LanceS13 @ Mar. 21 2002,5:12)</td></tr><tr><td id="QUOTE"></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (DuffMan @ Mar. 21 2002,3:23)</td></tr><tr><td id="QUOTE">7" with a +40 offset would look a few mm further out than stock.</td></tr></table><span id='postcolor'>
+40 was set the wheel more inward...+30, maybe less, would be better for a flush look with 7" wheels.  The thinner the wheel, the more you want to push it out for a flush look, so the less offset you want.</td></tr></table><span id='postcolor'>
Well the wheel is 1 inch wider than stock, so it sticks out about 12.5 mm in each direction. I'm not sure what stock s13 offset is, but I don't think its as low s +28 which is what it would need to be for this wheel to be farther in than the stock one.

240 2NR · 03-21-2002, 08:36 AM

Stock is +40 on an S13 (6" wide) and S14 (6.5" wide) as well I believe.  So a +40mm 7" wide wheel will be .5" closer to the fender (S13).  A 7.5" wide wheel with a +35 is almost exactly an inch out.  So that means the overall track would increase by 2".

*LanceS13* · 03-21-2002, 09:20 AM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (240 2NR @ Mar. 22 2002,08:36)</td></tr><tr><td id="QUOTE">Stock is +40 on an S13 (6" wide) and S14 (6.5" wide) as well I believe. So a +40mm 7" wide wheel will be .5" closer to the fender (S13). </td></tr></table><span id='postcolor'>
True, but it'll be 0.5" closer to the suspension as well.  You  could usue +30 and keep the same suspension clearance while pushing it out another 10mm/~0.5".

**West** · 03-21-2002, 10:13 AM

Your not going to get the look your going for on wheel that are mass produced. Unless its somehow the perfect offset. My 17x7.5 5Zigen 5ZR's with a +35 offset looked like the wheels needed spacers to get them flush with the fenders. Now when I custom ordered my 17x8 and 17x9 Work Miester S2R's with a +35 mm offeset they came right to the fenders of my s14 and looked badass. So, when you buy a wheel make sure you ordering from someone who knows the 240sx and someone who knows offsets. They will help you get the best wheel for your car. Just dont oder your wheels from blahwheelsupply.com and expect them to fit your 240.

diabolic hippo · 03-21-2002, 10:33 AM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (WeST @ Mar. 21 2002,11:13)</td></tr><tr><td id="QUOTE">Your not going to get the look your going for on wheel that are mass produced. Unless its somehow the perfect offset. My 17x7.5 5Zigen 5ZR's with a +35 offset looked like the wheels needed spacers to get them flush with the fenders. Now when I custom ordered my 17x8 and 17x9 Work Miester S2R's with a +35 mm offeset they came right to the fenders of my s14 and looked badass. So, when you buy a wheel make sure you ordering from someone who knows the 240sx and someone who knows offsets. They will help you get the best wheel for your car. Just dont oder your wheels from blahwheelsupply.com and expect them to fit your 240.</td></tr></table><span id='postcolor'>
yup, i bought my 18" c-2's from a local shop who specialize in honda's. from the side it looks alright but from the front and back it looks like i'm rolling on tire savers aka spare tires.

03-20-2002, 05:12 PM	#6
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 43 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (DuffMan @ Mar. 21 2002,3:23)</td></tr><tr><td id="QUOTE">7" with a +40 offset would look a few mm further out than stock.</td></tr></table><span id='postcolor'> +40 was set the wheel more inward...+30, maybe less, would be better for a flush look with 7" wheels.  The thinner the wheel, the more you want to push it out for a flush look, so the less offset you want. __________________ 1992 240SX Fastback #47 DSP MS SCCA RX-7 ITS Project FOR SALE

03-20-2002, 09:04 PM	#7
DJ Machine Zilvia Junkie Join Date: Jan 2002 Posts: 549 Trader Rating: (0) Feedback Score: 0 reviews	Has anyone here dealt with wheelmax? Im looking for wheels right now as well, im stuck between 3 wheels; Enkei RSF-2 Racing Hart C2 5zigen Copse it's out of those 3, theres pics of all 3 wheels at wheelmax or autimaging. __________________

03-21-2002, 08:36 AM	#9
240 2NR Zilvia FREAK! Join Date: Dec 2001 Location: Denver Posts: 1,131 Trader Rating: (0) Feedback Score: 0 reviews	Stock is +40 on an S13 (6" wide) and S14 (6.5" wide) as well I believe.  So a +40mm 7" wide wheel will be .5" closer to the fender (S13).  A 7.5" wide wheel with a +35 is almost exactly an inch out.  So that means the overall track would increase by 2". __________________ Steve 93 240sx FB currently very clean and for sale

03-21-2002, 09:20 AM	#10
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 43 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (240 2NR @ Mar. 22 2002,08:36)</td></tr><tr><td id="QUOTE">Stock is +40 on an S13 (6" wide) and S14 (6.5" wide) as well I believe. So a +40mm 7" wide wheel will be .5" closer to the fender (S13). </td></tr></table><span id='postcolor'> True, but it'll be 0.5" closer to the suspension as well.  You  could usue +30 and keep the same suspension clearance while pushing it out another 10mm/~0.5". __________________ 1992 240SX Fastback #47 DSP MS SCCA RX-7 ITS Project FOR SALE

03-21-2002, 10:13 AM	#11
West OMNOMNOMNOM Join Date: Dec 2000 Location: Denver, CO Age: 44 Posts: 6,456 Trader Rating: (0) Rides Gallery: West Feedback Score: 0 reviews	Your not going to get the look your going for on wheel that are mass produced. Unless its somehow the perfect offset. My 17x7.5 5Zigen 5ZR's with a +35 offset looked like the wheels needed spacers to get them flush with the fenders. Now when I custom ordered my 17x8 and 17x9 Work Miester S2R's with a +35 mm offeset they came right to the fenders of my s14 and looked badass. So, when you buy a wheel make sure you ordering from someone who knows the 240sx and someone who knows offsets. They will help you get the best wheel for your car. Just dont oder your wheels from blahwheelsupply.com and expect them to fit your 240. __________________ West - Zilvia.net - Toyobaru.net - NapkinSketch.com

03-20-2002, 03:19 PM	#1
JamesC89 Leaky Injector Join Date: Feb 2002 Location: NC Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Does anybody know of any rims that would have the right offset to look flush on an S13?  Preferably light, under $200 a piece, and available in gunmetal/black.  Am I just looking at the wrong numbers or will a 7" wide wheel with a +40mm offset not look flush with the fender?

03-20-2002, 03:23 PM	#2
DuffMan Post Whore! Join Date: Oct 2001 Location: in a cardboard box Posts: 2,517 Trader Rating: (0) Feedback Score: 0 reviews	7" with a +40 offset would look a few mm further out than stock. Tenzo R makes a lot of nice looking black/gunmetal wheels, and they're pretty cheap on wheelmax. I dont know if they're light or not though.

03-20-2002, 03:38 PM	#3
JamesC89 Leaky Injector Join Date: Feb 2002 Location: NC Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	I want the Kosei K1s from Tire Rack soo bad but do they offer them in Gunmetal and at the right offset?  (thought i'd ask because i thought i read that you were looking at them)

03-20-2002, 03:55 PM	#4
DuffMan Post Whore! Join Date: Oct 2001 Location: in a cardboard box Posts: 2,517 Trader Rating: (0) Feedback Score: 0 reviews	Nope, I've spent a lot of time on the phone with Tire Rack and the short answer is no you can't get them in gunmetal for the S13.

03-20-2002, 04:02 PM	#5
JamesC89 Leaky Injector Join Date: Feb 2002 Location: NC Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Well CRAP!  What else is there then?

03-21-2002, 02:57 AM	#8
DuffMan Post Whore! Join Date: Oct 2001 Location: in a cardboard box Posts: 2,517 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (LanceS13 @ Mar. 21 2002,5:12)</td></tr><tr><td id="QUOTE"></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (DuffMan @ Mar. 21 2002,3:23)</td></tr><tr><td id="QUOTE">7" with a +40 offset would look a few mm further out than stock.</td></tr></table><span id='postcolor'> +40 was set the wheel more inward...+30, maybe less, would be better for a flush look with 7" wheels.  The thinner the wheel, the more you want to push it out for a flush look, so the less offset you want.</td></tr></table><span id='postcolor'> Well the wheel is 1 inch wider than stock, so it sticks out about 12.5 mm in each direction. I'm not sure what stock s13 offset is, but I don't think its as low s +28 which is what it would need to be for this wheel to be farther in than the stock one.

03-21-2002, 10:33 AM	#12
diabolic hippo Leaky Injector Join Date: Mar 2002 Posts: 76 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (WeST @ Mar. 21 2002,11:13)</td></tr><tr><td id="QUOTE">Your not going to get the look your going for on wheel that are mass produced. Unless its somehow the perfect offset. My 17x7.5 5Zigen 5ZR's with a +35 offset looked like the wheels needed spacers to get them flush with the fenders. Now when I custom ordered my 17x8 and 17x9 Work Miester S2R's with a +35 mm offeset they came right to the fenders of my s14 and looked badass. So, when you buy a wheel make sure you ordering from someone who knows the 240sx and someone who knows offsets. They will help you get the best wheel for your car. Just dont oder your wheels from blahwheelsupply.com and expect them to fit your 240.</td></tr></table><span id='postcolor'> yup, i bought my 18" c-2's from a local shop who specialize in honda's. from the side it looks alright but from the front and back it looks like i'm rolling on tire savers aka spare tires.