s14 sr20det black top for sale - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

zeroneonzn · 02-04-2005, 11:24 PM

s14 blacktop sr20det motor for sale
motor has 45k on it same with tranny
mods, new exedy clutch less then 3k on it, koyo radiator with 2 fans, new water pump, and thermostat, denso iridum spark plugs, 3inch down pipe, turbo has less then 31k on it, stanless steel bradded lines on the turbo, has all the piping and things needed to just drop and run, wireing is already done for s14 only and comes with a blitz turbo timer , motor is well taken care of never abused. it is sitting inside a s14 at the moment. asking 4500 obo if u take it out ur self, if u want me to take it out its 250 more. local only. car is located in city of walnut CA so cali. pm me if interested

woodysmom · 02-05-2005, 02:53 AM

interested in the water pump clutch and dp if you decide to part

sr_sil80 · 02-05-2005, 04:24 AM

what kind of turbo does it have? if the turbo is stock, why was it replaced at 14k miles???

ghostuss · 02-05-2005, 11:40 AM

why does it cost 4500 again? You can probably get a clip for less than 3g. And 250 extra for taking out the engine? Yea there are parts but clips comes with extras too. I think you should post 2500 and takeout the engine urself.

zeroneonzn · 02-05-2005, 01:55 PM

the old turbo on it wasnt good so i replaced it with another stock turbo. so i had it replaced, ye a front clip is 3 k , now add up the parts in it and and everything will be over 5gs + the wireing is already done. this is basicly a strate up drop in ready to go no hassle race. easy swap u can do ur self. like i said 4500 obo least i ll go is maybe 4000. and sometimes with a front clip it might be a dead engine this one is in very good working order

93sileighty · 02-05-2005, 05:20 PM

your asking more for a used motor sold from a private seller than a "new" motor from a company offering a warranty and customer support. sorry man jst pointing out the facts.

zeroneonzn · 02-05-2005, 06:33 PM

alite ill lower it to 4000 even lowest ill go with 250 pulled by me

but u have to think though s14 front clip like 3500 installation 1500
water pump 100, thermo 50, new clutch 250, radiator 500 w/fans, turbo lines 100, nismo mounts 300, turbo timer 100, spark plugs 60, so ye its over 4500
but ill let it go for 4gs even and u dont have to do wiring at all its already done, so just basic drop in even.

02-04-2005, 11:24 PM	#1
zeroneonzn Leaky Injector Join Date: Jan 2005 Location: garden grove Posts: 64 Trader Rating: (0) Feedback Score: 0 reviews	s14 sr20det black top for sale s14 blacktop sr20det motor for sale motor has 45k on it same with tranny mods, new exedy clutch less then 3k on it, koyo radiator with 2 fans, new water pump, and thermostat, denso iridum spark plugs, 3inch down pipe, turbo has less then 31k on it, stanless steel bradded lines on the turbo, has all the piping and things needed to just drop and run, wireing is already done for s14 only and comes with a blitz turbo timer , motor is well taken care of never abused. it is sitting inside a s14 at the moment. asking 4500 obo if u take it out ur self, if u want me to take it out its 250 more. local only. car is located in city of walnut CA so cali. pm me if interested

02-05-2005, 11:40 AM	#4
ghostuss Zilvia FREAK! Join Date: Jan 2004 Location: San Diego/San Francisco Age: 39 Posts: 1,337 Trader Rating: (0) Feedback Score: 0 reviews	why does it cost 4500 again? You can probably get a clip for less than 3g. And 250 extra for taking out the engine? Yea there are parts but clips comes with extras too. I think you should post 2500 and takeout the engine urself. __________________ 96 all suspension s14 SOLD 90 s13 coupe - SOLD Currently rocking 2002 BMW M3 w/ custom suspension. ButtonWillow, CA entire circuit drift/grip event by shock drifting spot for sale. Take over my spot for $150 only.

02-05-2005, 02:53 AM	#2
woodysmom Zilvia Junkie Join Date: Jan 2003 Location: Los Angeles Posts: 306 Trader Rating: (0) Feedback Score: 0 reviews	interested in the water pump clutch and dp if you decide to part

02-05-2005, 04:24 AM	#3
sr_sil80 Users Awaiting Email Confirmation Join Date: Mar 2004 Location: SoCal Posts: 311 Trader Rating: (0) Feedback Score: 0 reviews	what kind of turbo does it have? if the turbo is stock, why was it replaced at 14k miles???

02-05-2005, 01:55 PM	#5
zeroneonzn Leaky Injector Join Date: Jan 2005 Location: garden grove Posts: 64 Trader Rating: (0) Feedback Score: 0 reviews	the old turbo on it wasnt good so i replaced it with another stock turbo. so i had it replaced, ye a front clip is 3 k , now add up the parts in it and and everything will be over 5gs + the wireing is already done. this is basicly a strate up drop in ready to go no hassle race. easy swap u can do ur self. like i said 4500 obo least i ll go is maybe 4000. and sometimes with a front clip it might be a dead engine this one is in very good working order

02-05-2005, 05:20 PM	#6
93sileighty Zilvia Member Join Date: Mar 2004 Location: Baton Rouge Posts: 244 Trader Rating: (0) Feedback Score: 0 reviews	your asking more for a used motor sold from a private seller than a "new" motor from a company offering a warranty and customer support. sorry man jst pointing out the facts.

02-05-2005, 06:33 PM	#7
zeroneonzn Leaky Injector Join Date: Jan 2005 Location: garden grove Posts: 64 Trader Rating: (0) Feedback Score: 0 reviews	alite ill lower it to 4000 even lowest ill go with 250 pulled by me but u have to think though s14 front clip like 3500 installation 1500 water pump 100, thermo 50, new clutch 250, radiator 500 w/fans, turbo lines 100, nismo mounts 300, turbo timer 100, spark plugs 60, so ye its over 4500 but ill let it go for 4gs even and u dont have to do wiring at all its already done, so just basic drop in even.