Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 03-03-2005, 01:28 PM   #1
Bone
Zilvia Junkie
 
Join Date: Jan 2004
Location: Chattanooga, TN
Posts: 337
Trader Rating: (0)
Bone is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to Bone
Safc maps KA?

Just curious but does anyone thought about setting up a thread to share Safc settings based on Injectors and PSI? You know kind like: Mine was tuned at 14.5A/F running 480's and 14psi set at -32 low and yahta yahta. (just an example)

Now it would certainly be a use at your own risk thread but would give most a good idea of a safe base setting providing boost, injectors and such matched. Just a thought unless there is one somewhere that I have allready missed.

Sry if this is in the wrong section wasnt sure where since it is kinda a tech question.

I could use some good 370cc, 8psi Safc II maps
Bone is offline   Reply With Quote
Sponsored Links
Old 03-03-2005, 01:30 PM   #2
WeldingHank
Leaky Injector
 
Join Date: Feb 2004
Location: Massachusetts
Posts: 137
Trader Rating: (0)
WeldingHank is an unknown quantity at this point
Feedback Score: 0 reviews
every car is different, get your car on a wideband and tune from there.
__________________
1989 240sx:CA18DET
My Cardomain
WeldingHank is offline   Reply With Quote
Old 03-03-2005, 01:38 PM   #3
Bone
Zilvia Junkie
 
Join Date: Jan 2004
Location: Chattanooga, TN
Posts: 337
Trader Rating: (0)
Bone is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to Bone
OK so all factory ecus are tuned differently on the car. NO I am saying that anothers maps can be altered slightly to run safely on similiar setups. I didnt say optimally but safely. I have no dyno close and do have access to a wideband but it is not immediate access. Sharing maps so they can be a starting point should create no problems if you do it with common sense. Thx though but I think you kinda missed my whole point of the post.

To clarify I have searched and searched for the safe settings to run 370's at for initial fire up. I finally had to ask then it got strung beetween N/A settings and Turbo settings if there was a thread listing what peeps setups are and there maps it would be easy to figure a base setting to fire off of.
Bone is offline   Reply With Quote
Old 03-03-2005, 08:13 PM   #4
orion::S14
Nissanaholic!
 
orion::S14's Avatar
 
Join Date: May 2003
Location: Orange Park, FL
Posts: 1,666
Trader Rating: (0)
orion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud oforion::S14 has much to be proud of
Feedback Score: 0 reviews
The only base maps to rely upon are basic math...

If the stock injectors are 270cc, and you're running 370s...then it's -27% across the board (270/370 = .73 ... (.73 - 1) = -.27)

Stock is 270 and you're running 480s...then it's -44% across the board (1 - (270/480) = -.4375

Etc, etc...

- Brian
__________________
www.KA24DEvelopment.com
orion::S14 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net