I need help... 5 speed tranny - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

vinhisbored · 04-17-2005, 11:01 PM

Uh, I was going to do an auto to 5 speed conversion on my car, and I've got all the parts needed, and was just waiting on the transmission. Unfortunately, I received it, and left it there. Since I purchased it on ebay, I left the guy his feedback already, but then when I was looking at it later on, for some reason I can only put it into 1st and 2nd gear positions. Can anyone tell me if this always happens when the transmission is just laying there outside of the car? Or, is the transmission that I purchased bad, and I only got ripped off? Are there any ways that I would be able to check if it's still good OTHER than trying to install it in the car? I'd be thankful for anyone's help.

9524tee · 04-17-2005, 11:19 PM

good question , ive seen in some cases that happens , just cuz theres no clutch , and no moving fluid etc etc . and once they were bolted in they worked fine . but ... im not positive in your case mang .

chlatboy · 04-18-2005, 01:34 AM

Same thing happened to me. I had to buy another tranny. If you run into problems hit me up since i just finished mine.

daredevildoug · 04-18-2005, 03:41 AM

dang man that sucks... could be because of the fork... probably got stuck when installing.. well thats from experience... good luck though..

nissan_driver24 · 04-18-2005, 09:45 AM

crack it open and check it out... if u have questions about doing this i'll be glad to help.... from my experience with tranny not shifting into gears is because something is messed up such as bad sychro, fork, sleeve, ect... good luck on it

vinhisbored · 04-18-2005, 09:02 PM

Thanks for the help guys, me and my friend will check it out someone, and I'll keep you guys updated about what happened.. and hopefully you guys'll know what's up with it / or what to do. Thanks for those who have posted, I appreciate it.

While I'm at it, do you guys have any pointers while doing this swap? Me and my friend are going to do it on both of our cars, starting with mine. So, the swap will probably begin within the next 2 weeks, (the tranny that's running into problems will probably go to my friend.. so we'll check up on that.. and I ordered a different one, and it's on the way) and I'm just finding out some back round on it.. before it's performed. Are there any pointers.. do's and dont's? Let me know..

chlatboy · 04-18-2005, 09:08 PM

Taking out the tranny is kinda a PITA. after taking off most of the tranny bolts, you can use a jack to pick up the engine a little to get the top bolts off. Remember to drain all the tranny fluid before hand. Make sure you have all the tools needed. Keep a breaker bar on hand as well as some sort of extension.

vinhisbored · 04-18-2005, 09:18 PM

Oh.. what else do I need other than what's going into the car itself.. (parts wise) I know I need the bolts/nuts and what not, but what else do I need? Fluids.. etc? Also, I'm doing it on a '98.. so.. should there be a difference to your car, whichever model it is?

*NemeGuero* · 04-18-2005, 10:19 PM

dude.. there are plenty of parts list for this..
SEARCH..
http://www.240sx.org/links/installs/s14_5speed_swap.htm
http://ka24development.com/cwilfert/...lectrical.html

damnit! took me 2 seconds..
get a tube of grease, 3 liters of gear oil, and brake fluid for the master cylinder

04-17-2005, 11:01 PM	#1
vinhisbored Zilvia FREAK! Join Date: Apr 2005 Location: socal Posts: 1,359 Trader Rating: (15) Feedback Score: 15 reviews	I need help... 5 speed tranny Uh, I was going to do an auto to 5 speed conversion on my car, and I've got all the parts needed, and was just waiting on the transmission. Unfortunately, I received it, and left it there. Since I purchased it on ebay, I left the guy his feedback already, but then when I was looking at it later on, for some reason I can only put it into 1st and 2nd gear positions. Can anyone tell me if this always happens when the transmission is just laying there outside of the car? Or, is the transmission that I purchased bad, and I only got ripped off? Are there any ways that I would be able to check if it's still good OTHER than trying to install it in the car? I'd be thankful for anyone's help.

04-18-2005, 01:34 AM	#3
chlatboy Zilvia FREAK! Join Date: Aug 2004 Location: Somewhere Posts: 1,252 Trader Rating: (0) Feedback Score: 0 reviews	Same thing happened to me. I had to buy another tranny. If you run into problems hit me up since i just finished mine. __________________ If you dont know SEARCH!!!

04-18-2005, 09:45 AM	#5
nissan_driver24 Zilvia Junkie Join Date: Oct 2002 Location: Sacramento, CA Age: 40 Posts: 451 Trader Rating: (2) Feedback Score: 2 reviews	crack it open and check it out... if u have questions about doing this i'll be glad to help.... from my experience with tranny not shifting into gears is because something is messed up such as bad sychro, fork, sleeve, ect... good luck on it __________________ --240sx Driver Since 2002 to 2013--

04-18-2005, 09:08 PM	#7
chlatboy Zilvia FREAK! Join Date: Aug 2004 Location: Somewhere Posts: 1,252 Trader Rating: (0) Feedback Score: 0 reviews	Taking out the tranny is kinda a PITA. after taking off most of the tranny bolts, you can use a jack to pick up the engine a little to get the top bolts off. Remember to drain all the tranny fluid before hand. Make sure you have all the tools needed. Keep a breaker bar on hand as well as some sort of extension. __________________ If you dont know SEARCH!!!

04-17-2005, 11:19 PM	#2
9524tee Zilvia Junkie Join Date: Nov 2001 Location: Lexington KY Posts: 545 Trader Rating: (0) Feedback Score: 0 reviews	good question , ive seen in some cases that happens , just cuz theres no clutch , and no moving fluid etc etc . and once they were bolted in they worked fine . but ... im not positive in your case mang .

04-18-2005, 03:41 AM	#4
daredevildoug Leaky Injector Join Date: Feb 2003 Location: hawaii Age: 39 Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	dang man that sucks... could be because of the fork... probably got stuck when installing.. well thats from experience... good luck though..

04-18-2005, 09:02 PM	#6
vinhisbored Zilvia FREAK! Join Date: Apr 2005 Location: socal Posts: 1,359 Trader Rating: (15) Feedback Score: 15 reviews	Thanks for the help guys, me and my friend will check it out someone, and I'll keep you guys updated about what happened.. and hopefully you guys'll know what's up with it / or what to do. Thanks for those who have posted, I appreciate it. While I'm at it, do you guys have any pointers while doing this swap? Me and my friend are going to do it on both of our cars, starting with mine. So, the swap will probably begin within the next 2 weeks, (the tranny that's running into problems will probably go to my friend.. so we'll check up on that.. and I ordered a different one, and it's on the way) and I'm just finding out some back round on it.. before it's performed. Are there any pointers.. do's and dont's? Let me know..

04-18-2005, 09:18 PM	#8
vinhisbored Zilvia FREAK! Join Date: Apr 2005 Location: socal Posts: 1,359 Trader Rating: (15) Feedback Score: 15 reviews	Oh.. what else do I need other than what's going into the car itself.. (parts wise) I know I need the bolts/nuts and what not, but what else do I need? Fluids.. etc? Also, I'm doing it on a '98.. so.. should there be a difference to your car, whichever model it is?

04-18-2005, 10:19 PM	#9
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	dude.. there are plenty of parts list for this.. SEARCH.. http://www.240sx.org/links/installs/s14_5speed_swap.htm http://ka24development.com/cwilfert/...lectrical.html damnit! took me 2 seconds.. get a tube of grease, 3 liters of gear oil, and brake fluid for the master cylinder