Rotor size needed for Z32 upgrade on S13? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Vlade · 05-22-2005, 01:18 AM

Hi

I got hold of some used 26mm Z32 calipers... what are the exact dimensions of the rotors that will be needed on a S13. I still use a 4 lug hub.

This is what i think is needed

Diameter: 280mm
Original Height: 49mm
Original Thickness: 26mm
Minimum Thickness: 24.2mm
Center hole: 68mm
Lug holes: 4

mbmbmb23 · 05-22-2005, 01:51 AM

Quote:

Originally Posted by Vlade

Hi

I got hold of some used 26mm Z32 calipers... what are the exact dimensions of the rotors that will be needed on a S13. I still use a 4 lug hub.

This is what i think is needed

Diameter: 280mm
Original Height: 49mm
Original Thickness: 26mm
Minimum Thickness: 24.2mm
Center hole: 68mm
Lug holes: 4

You'll need to redrill the 26mm 5 lug rotors for 4 lug.

-m

RichthePoser · 05-22-2005, 02:05 AM

stock Z32 rotors, redrilled for 4-lug.

Rich

Vlade · 05-22-2005, 01:00 PM

The reason why I ask the exact dimensions is because a rotor manufacturing company (www.powerbrake.co.za) close to me will manufacture my rotors to spec, I just need to supply them with the sizes...

The sizes I listed above are from a R32T / R33 and got the dimension from Disk Brake Austrailia not sure if that car uses the same Calipers as the Z32?

05-22-2005, 01:18 AM	#1
Vlade Join Date: Jan 2004 Location: Pretoria - South Africa Age: 42 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Rotor size needed for Z32 upgrade on S13? Hi I got hold of some used 26mm Z32 calipers... what are the exact dimensions of the rotors that will be needed on a S13. I still use a 4 lug hub. This is what i think is needed Diameter: 280mm Original Height: 49mm Original Thickness: 26mm Minimum Thickness: 24.2mm Center hole: 68mm Lug holes: 4

05-22-2005, 02:05 AM	#3
RichthePoser Join Date: Apr 2005 Location: San Jose, CA Posts: 48 Trader Rating: (0) Feedback Score: 0 reviews	stock Z32 rotors, redrilled for 4-lug. Rich

05-22-2005, 01:00 PM	#4
Vlade Join Date: Jan 2004 Location: Pretoria - South Africa Age: 42 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	The reason why I ask the exact dimensions is because a rotor manufacturing company (www.powerbrake.co.za) close to me will manufacture my rotors to spec, I just need to supply them with the sizes... The sizes I listed above are from a R32T / R33 and got the dimension from Disk Brake Austrailia not sure if that car uses the same Calipers as the Z32?