pilot beaing install, extra bearing in Flywheel?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jy116 · 06-14-2005, 09:41 PM

No, I dont mean the throw out bearing, I mean the PILOT BEARING thats on the end of the input shaft, on the engine side.

The bronze ring is my new pilot bearing, I have no idea wut the bigger ring is. Also, the new ring looks like it should fit inside the bigger ring, but the old ring seems to be melted/dissolved all over the bigger ring.

Note the top/back end of the bigger ring. It looks like it was 1 piece with the flywheel.

BACKGROUND: I had a 1991 auto tranny, swapped by a "friend", and Im starting to think he might have used the auto flywheel and pocketed the used MT flywheel i gave him?

Anything helps... car stil in air at frends house :/

06-14-2005, 09:41 PM	#1
jy116 Zilvia Addict Join Date: Aug 2003 Location: Berkeley, CALifornia Posts: 785 Trader Rating: (0) Feedback Score: 0 reviews	pilot beaing install, extra bearing in Flywheel?? No, I dont mean the throw out bearing, I mean the PILOT BEARING thats on the end of the input shaft, on the engine side. The bronze ring is my new pilot bearing, I have no idea wut the bigger ring is. Also, the new ring looks like it should fit inside the bigger ring, but the old ring seems to be melted/dissolved all over the bigger ring. Note the top/back end of the bigger ring. It looks like it was 1 piece with the flywheel. BACKGROUND: I had a 1991 auto tranny, swapped by a "friend", and Im starting to think he might have used the auto flywheel and pocketed the used MT flywheel i gave him? Anything helps... car stil in air at frends house :/ __________________ KYB AGX w/ dust boots $500obo... sadly serious Last edited by jy116; 06-14-2005 at 10:48 PM.. Reason: ~