Power steering rack fitting - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dpreuss · 08-24-2005, 11:41 AM

One more quick question. Instead of buying different hard lines for the ps pressure line for my sr swap, i want to run a braided line fromt the pump to the rack. I already know the fitting in need at the pump, but i just need to know what fitting i need to go into the rack. So if anybody knows what fitting i would need, please let me know. thanks. -Derek

projectRDM · 08-24-2005, 07:02 PM

Remove it and match it up, You'll need the flare type with an o-ring anyway, best to make certain it's right.

docrice · 08-24-2005, 10:06 PM

braided lines for power steering? isn't that a bit overkill/waste of money?

dpreuss · 08-25-2005, 01:08 AM

its cheaper than buying new hard lines

drift freaq · 08-25-2005, 01:22 AM

we ran custom lines with a transmission cooler for my RB swap because the stock steering lines could not be used.

Johny5 · 08-25-2005, 07:21 AM

ahahaha, good luck going to the track and turning multiple times with regular braided steel lines. here's some literature for you guys.

http://chevyhiperformance.com/howto/4399/

"Power Steering Hose Is Different

Although you've probably seen it dozens of times, regular stainless braided AN hose should not be used for power-steering hose applications. Pressure spikes in the power-steering system can exceed the burst strength of regular AN hose. That is why companies like Aeroquip and Earl's have developed specific power-steering hose, complete with its own unique steel fittings, for use in these systems. Power-steering hose is usually made of an elastomer tube, polyester inner braid with wire-braid reinforcement, and a polyester-braid cover. Its maximum operating pressure is rated at 2,250 psi. While ideally suited for steering and hydraulic systems, this type of hose can be used in other applications including fuel, oil, and compressed air. Most Winston Cup pit crews use this type of hose with their "over-the-wall" air tools because of its flexibility and extreme pressure-spike capabilities in case it gets run over."

docrice · 08-25-2005, 07:33 AM

Excellent info Johny5!

dpreuss · 08-25-2005, 08:53 AM

thanks for the info, but i do have the power steering hose made by areoquip, i just need to know what fittings to get

FRpilot · 08-25-2005, 10:46 AM

this is an interesting thread. can you post pictures of it when you get it on the car depreuss?

dpreuss · 08-25-2005, 12:02 PM

yeah, i will post pics of my entire swap when i get done, does anyone know who i could contact to find out the size of fitting i need? I already tried phase 2 and heavythrottle, neither of them knew. Thanks - Derek

Johny5 · 08-25-2005, 01:09 PM

hey i'll have some help for you soon. i'm doing fitting sizes on my s14 steering rack as i've been considering doing stainless braided ps as well. using the proper 2500psi braided hose and steel fittings of course. but i'll have fitting sizes soon.

Johny5 · 08-25-2005, 01:11 PM

p.s. please do share what fitting is used on the pump, i'll find rack fittings because i have a spare rack but i need to know what a ka pump uses. we're referring to the top one thats high psi and normally uses banjo bolt right? are you gonna do a 90 degree there instead of banjo?

dpreuss · 08-25-2005, 07:45 PM

I actually bought that part of the line from advance auto parts. Its a line from the banjo fitting that runs into a block with 2 holes, one for the sensor, and one for the hard line to the rack to screw into. You can look at it here

http://www.partsamerica.com/ProductD...ype=18&ptset=A

However, i do know the banjo fitting you need. You will need a 15mm banjo fitting to go into the pump. I hope I have helped, and i do thank you in advance for your help in finding the fitting size for me. Thanks again -Derek

dpreuss · 08-28-2005, 12:05 PM

Let me know when you find that fitting size for the rack johnny 5

Johny5 · 08-28-2005, 01:56 PM

should be soon man
just gotta get the motor out and the rack off the car.

08-24-2005, 11:41 AM	#1
dpreuss Join Date: Aug 2005 Location: Chicago Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Power steering rack fitting One more quick question. Instead of buying different hard lines for the ps pressure line for my sr swap, i want to run a braided line fromt the pump to the rack. I already know the fitting in need at the pump, but i just need to know what fitting i need to go into the rack. So if anybody knows what fitting i would need, please let me know. thanks. -Derek

08-24-2005, 07:02 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Remove it and match it up, You'll need the flare type with an o-ring anyway, best to make certain it's right. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

08-24-2005, 10:06 PM	#3
docrice Zilvia Junkie Join Date: Jan 2003 Location: central PA Age: 40 Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	braided lines for power steering? isn't that a bit overkill/waste of money? __________________

08-25-2005, 01:22 AM	#5
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	we ran custom lines with a transmission cooler for my RB swap because the stock steering lines could not be used. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

08-25-2005, 07:21 AM	#6
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 40 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	ahahaha, good luck going to the track and turning multiple times with regular braided steel lines. here's some literature for you guys. http://chevyhiperformance.com/howto/4399/ "Power Steering Hose Is Different Although you've probably seen it dozens of times, regular stainless braided AN hose should not be used for power-steering hose applications. Pressure spikes in the power-steering system can exceed the burst strength of regular AN hose. That is why companies like Aeroquip and Earl's have developed specific power-steering hose, complete with its own unique steel fittings, for use in these systems. Power-steering hose is usually made of an elastomer tube, polyester inner braid with wire-braid reinforcement, and a polyester-braid cover. Its maximum operating pressure is rated at 2,250 psi. While ideally suited for steering and hydraulic systems, this type of hose can be used in other applications including fuel, oil, and compressed air. Most Winston Cup pit crews use this type of hose with their "over-the-wall" air tools because of its flexibility and extreme pressure-spike capabilities in case it gets run over." __________________ www.stewartleask.com

08-25-2005, 01:08 AM	#4
dpreuss Join Date: Aug 2005 Location: Chicago Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	its cheaper than buying new hard lines

08-25-2005, 07:33 AM	#7
docrice Zilvia Junkie Join Date: Jan 2003 Location: central PA Age: 40 Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	Excellent info Johny5! __________________

08-25-2005, 08:53 AM	#8
dpreuss Join Date: Aug 2005 Location: Chicago Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	thanks for the info, but i do have the power steering hose made by areoquip, i just need to know what fittings to get

08-25-2005, 12:02 PM	#10
dpreuss Join Date: Aug 2005 Location: Chicago Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	yeah, i will post pics of my entire swap when i get done, does anyone know who i could contact to find out the size of fitting i need? I already tried phase 2 and heavythrottle, neither of them knew. Thanks - Derek

08-25-2005, 01:09 PM	#11
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 40 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	hey i'll have some help for you soon. i'm doing fitting sizes on my s14 steering rack as i've been considering doing stainless braided ps as well. using the proper 2500psi braided hose and steel fittings of course. but i'll have fitting sizes soon. __________________ www.stewartleask.com

08-25-2005, 01:11 PM	#12
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 40 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	p.s. please do share what fitting is used on the pump, i'll find rack fittings because i have a spare rack but i need to know what a ka pump uses. we're referring to the top one thats high psi and normally uses banjo bolt right? are you gonna do a 90 degree there instead of banjo? __________________ www.stewartleask.com

08-25-2005, 07:45 PM	#13
dpreuss Join Date: Aug 2005 Location: Chicago Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	I actually bought that part of the line from advance auto parts. Its a line from the banjo fitting that runs into a block with 2 holes, one for the sensor, and one for the hard line to the rack to screw into. You can look at it here http://www.partsamerica.com/ProductD...ype=18&ptset=A However, i do know the banjo fitting you need. You will need a 15mm banjo fitting to go into the pump. I hope I have helped, and i do thank you in advance for your help in finding the fitting size for me. Thanks again -Derek

08-28-2005, 12:05 PM	#14
dpreuss Join Date: Aug 2005 Location: Chicago Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Let me know when you find that fitting size for the rack johnny 5

08-28-2005, 01:56 PM	#15
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 40 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	should be soon man just gotta get the motor out and the rack off the car. __________________ www.stewartleask.com