Car Won't start!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

importsaint · 09-16-2005, 12:51 AM

1993 240sx SE 5-speed HB
Ok so about three months ago I was in a rear in collision, my front end ended up under a minivan in front of me. The car started and I drove home from the accident. When I went to start it a few days later it would not start. I replaced all the parts related to the accident (radiator, did an S13 front headlight swap, A/C condenser). I timed the car completely and it started, but when I went to give it gas it just dropped RPMs and died. The parts I have replace are my fuel pump, ignition switch, ECU(M), Camshaft Position Sensor and distributor, knock sensor, ignition control module, ignition coil, intake pipe (was cracked in accident), and starter. I am about to replace the Crankshaft position sensor, can someone give me some advice, I am getting fuel and spark too! Please someone help me!!!!

orion::S14 · 09-16-2005, 07:10 AM

Check your TPS...

TPS and MAF tell the ECU what it need to know for driveability and timing advance...bad TPS could cause your problems for sure.

- Brian

jaja · 09-16-2005, 06:23 PM

go to the junkyard and get a new KA

importsaint · 09-25-2005, 09:54 AM

I replaced the TPS today still nothing

, and I swear the timing is correct. I am feeling like saying F-it and swapping for an SR

, but I don't want it to end up being a problem that carries over.

09-16-2005, 12:51 AM	#1
importsaint Join Date: Jan 2004 Location: Broken Arrow, Okla, USA Age: 39 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Car Won't start!!! 1993 240sx SE 5-speed HB Ok so about three months ago I was in a rear in collision, my front end ended up under a minivan in front of me. The car started and I drove home from the accident. When I went to start it a few days later it would not start. I replaced all the parts related to the accident (radiator, did an S13 front headlight swap, A/C condenser). I timed the car completely and it started, but when I went to give it gas it just dropped RPMs and died. The parts I have replace are my fuel pump, ignition switch, ECU(M), Camshaft Position Sensor and distributor, knock sensor, ignition control module, ignition coil, intake pipe (was cracked in accident), and starter. I am about to replace the Crankshaft position sensor, can someone give me some advice, I am getting fuel and spark too! Please someone help me!!!! __________________ Import Saint

09-16-2005, 07:10 AM	#2
orion::S14 Nissanaholic! Join Date: May 2003 Location: Orange Park, FL Posts: 1,666 Trader Rating: (0) Feedback Score: 0 reviews	Check your TPS... TPS and MAF tell the ECU what it need to know for driveability and timing advance...bad TPS could cause your problems for sure. - Brian __________________ www.KA24DEvelopment.com

09-16-2005, 06:23 PM	#3
jaja Zilvia Member Join Date: Apr 2002 Location: Torrance, CA Posts: 179 Trader Rating: (0) Feedback Score: 0 reviews	go to the junkyard and get a new KA __________________ 93 S13 Vert: KA, 5 Spd, intake, exhaust, coilovers, etc 94 bronco: 6"+35"

09-25-2005, 09:54 AM	#4
importsaint Join Date: Jan 2004 Location: Broken Arrow, Okla, USA Age: 39 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	I replaced the TPS today still nothing , and I swear the timing is correct. I am feeling like saying F-it and swapping for an SR , but I don't want it to end up being a problem that carries over. __________________ Import Saint