S14 Manual Tranny to S13 Car - v7647574xSideways8 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AadosX · 11-10-2005, 03:42 AM

I've been searching as usual for at least an hour and have come up blank on one simple question.

I am using an S14 manual transmission on an S14 KA in my S13 wired car. I obviously will not be using the Crank Sensor that is at the top of the tranny, so do I just leave the hole open or patch it up?... or should I just keep the sensor in there and leave it unplugged?

Even though I've searched and read quite a few pages, it seems like everyone is swapping S13 trannies into S14's... so I definitely know all about leaving it off or drilling a hole and custom mounting when it comes to that case... hehe.

Thanks guys.

-John

projectRDM · 11-10-2005, 08:32 AM

Leave the sensor in, plug it with a big bolt, or fill it with dried feces.

brainfood · 11-10-2005, 10:53 AM

Where are you located I have an s13 trans in my s14.

AadosX · 11-10-2005, 12:49 PM

Thanks. I'm east coast yo... not Cali.

Siizzzoooo · 11-10-2005, 01:10 PM

just leave all the sensors plugged in, honestly, all u need to hook up are the reverse lights and speed sensor.

drift freaq · 11-10-2005, 01:37 PM

Slizzoo, hit on the nailhead and if you read the auto to 5 speed swap faq I wrote, in our faq and archive section, you would see on the S13 all you need to do is what slizzoo said. I.E. Hook up your reverse lights and your speed sensor. I ran a S14 5 speed in my car, I left the top of the bellhousing sensor on unconnected.

AadosX · 11-10-2005, 03:06 PM

Quote:

Originally Posted by drift freaq

Slizzoo, hit on the nailhead and if you read the auto to 5 speed swap faq I wrote, in our faq and archive section, you would see on the S13 all you need to do is what slizzoo said. I.E. Hook up your reverse lights and your speed sensor. I ran a S14 5 speed in my car, I left the top of the bellhousing sensor on unconnected.

Yes I knew about the other sensors, that's why I didn't ask about them. And I did read your write up. It is nice, thanks for doing it, but I have a hard time breaking down and making my way through sentences that don't contain punctuation or breaks, etc. I looked at your write up for at least 10 minutes and couldn't find anything about the sensor.

11-10-2005, 03:42 AM	#1
AadosX Zilvia Addict Join Date: Dec 2003 Location: Auburn University Posts: 959 Trader Rating: (0) Feedback Score: 0 reviews	S14 Manual Tranny to S13 Car - v7647574xSideways8 I've been searching as usual for at least an hour and have come up blank on one simple question. I am using an S14 manual transmission on an S14 KA in my S13 wired car. I obviously will not be using the Crank Sensor that is at the top of the tranny, so do I just leave the hole open or patch it up?... or should I just keep the sensor in there and leave it unplugged? Even though I've searched and read quite a few pages, it seems like everyone is swapping S13 trannies into S14's... so I definitely know all about leaving it off or drilling a hole and custom mounting when it comes to that case... hehe. Thanks guys. -John

11-10-2005, 08:32 AM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Leave the sensor in, plug it with a big bolt, or fill it with dried feces. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

11-10-2005, 10:53 AM	#3
brainfood Post Whore! Join Date: Jun 2004 Location: Eagle Rock, CA Age: 42 Posts: 2,957 Trader Rating: (18) Feedback Score: 18 reviews	Where are you located I have an s13 trans in my s14. __________________ Bryan Rogers http://www.seriousbadass.com

11-10-2005, 01:10 PM	#5
Siizzzoooo Zilvia FREAK! Join Date: Feb 2002 Location: Murfreesboro,TN Posts: 1,355 Trader Rating: (0) Feedback Score: 0 reviews	just leave all the sensors plugged in, honestly, all u need to hook up are the reverse lights and speed sensor. __________________ 2004 Honda S2000 NFR \| 2007 Acura TL CBP \| Project *Coming Soon*

11-10-2005, 01:37 PM	#6
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	Slizzoo, hit on the nailhead and if you read the auto to 5 speed swap faq I wrote, in our faq and archive section, you would see on the S13 all you need to do is what slizzoo said. I.E. Hook up your reverse lights and your speed sensor. I ran a S14 5 speed in my car, I left the top of the bellhousing sensor on unconnected. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

11-10-2005, 12:49 PM	#4
AadosX Zilvia Addict Join Date: Dec 2003 Location: Auburn University Posts: 959 Trader Rating: (0) Feedback Score: 0 reviews	Thanks. I'm east coast yo... not Cali.