rear hub, bearing - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drftfan · 09-09-2006, 05:37 PM

How hard is it to swap the rear hub and bearing on the s13? Is it all one unit?

Irukandji · 09-09-2006, 05:52 PM

Quote:

Originally Posted by drftfan

How hard is it to swap the rear hub and bearing on the s13? Is it all one unit?

Yes, it's one whole unit.

Just take off the brakes, rotor, and have a 36mm socket for the axel nut.
4 bolts from the back, and you're done.

Agent23 · 09-09-2006, 06:17 PM

1 hour each side with air tools. If you want to separate the bearing from the hub you'll need a press, a set of step plates/ various large sockets and a bearing separator. See section RA-8 in the FSM for an illustration.

drftfan · 09-09-2006, 06:21 PM

Ok from the pictures I have seen I am not seeing any bolts. I am refering to the rear.

09-09-2006, 05:37 PM	#1
drftfan Leaky Injector Join Date: Aug 2006 Location: Orange County, Somewhere. Age: 49 Posts: 62 Trader Rating: (0) Feedback Score: 0 reviews	rear hub, bearing How hard is it to swap the rear hub and bearing on the s13? Is it all one unit?

09-09-2006, 06:17 PM	#3
Agent23 Join Date: Aug 2006 Location: MD Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	1 hour each side with air tools. If you want to separate the bearing from the hub you'll need a press, a set of step plates/ various large sockets and a bearing separator. See section RA-8 in the FSM for an illustration.

09-09-2006, 06:21 PM	#4
drftfan Leaky Injector Join Date: Aug 2006 Location: Orange County, Somewhere. Age: 49 Posts: 62 Trader Rating: (0) Feedback Score: 0 reviews	Ok from the pictures I have seen I am not seeing any bolts. I am refering to the rear.