post your suspension setup.

[partymonster 975]

Post your suspension setup!

[slammedS14]

just the basic tein coil over kit right now. just getting started.

[SwiftS14]

Tokico’s blue HP shocks with Eibach Sportslines springs,Eibach camber bolts, SPL tie rods end, and Enegery suspension tension rod bushings.

[usdm180sx]

Cusco comp zero-s coilovers and front and rear strut bars, SPL T/C rods, RUCA's, toe links, and subframe spacers and a Tanabe drift spec rear sway bar. Car was aligned at Hiro's auto.

[ayuaddict]

KTS coilovers and subframe spacers.

[cdlong]

i see you took my advice, sort of. just seeing parts lists isn't going to help. you need to know what the cars are used for and how they like the parts.

my setup is a DD/ autocross monster.
KYB/AGX - i would buy them again if i weren't planning on upgrading to coilovers next
eibach sportlines - good springs but they are too soft. they are good on the street but the car rolls a lot with grippier tires on the track.
SPL tie rod ends - best money i've spent on my car.
various poly bushings.

i've got some RUCAs and whiteline swaybars to put on.

[irritatedmax]

daily driver/hopefully some autox next year/drift days o wait i live in nebraska:

stance coilovers with 8/6 springs- great adjustability, only coils i've ever had, not too harsh
peak performance RUCA's - no problems or noise
moog tie rod ends

soon to purchase:
energy suspension master bushing kit
peak performance urethane rear subframe spacers

[Jung918]

Energy suspension master bushing kit
SPL Tension, Traction, Rear Toe and Rear Camber arms
Tein Tie Rods
Silkroads RMA8 coilovers
E-bay front and rear strut bars
Hicas rear sway
Nismo Power Brace
Rear SubFramce Spacers

[kaotic]

jic flt-a2s - japan spec
ctune tension, traction, toe, camber ,and subframe spacers
front and rear tower strut bars (of course)

next up will be a power brace of some kind, i heard those help a lot..

but as far as how my car is now, it drives on rails!

[WilloW]

Currently I'm a bit broke so there's nothing special here...

-SPL tension rods.
-Tokico J-Sports front, Tokico Type=NN 5 ways adjustable rears (both are short stroke).
-Megan Racing lowering springs.
-Rear sway bar (my s14 is a base).
-Currently trying to decide on either Tein tie rod ends or KTS, any suggestions?

That's all folks.

[arian23]

My Ultra Red 96 S14 SE consists of:

Kyb AGX with H&R spring (ready for coilovers),
Ebay front strut bar,
Tanabe rear strut bar,
Tanabe F&R sway bars,
Nismo power brace,
Courtesyparts.com Pillowball tension rods. (green ones)
I need to install Tein Tie rods with the Tein rod ends.
And i also got 30mm TT calipers.

[andy31144]

I ran out of money after I bought my Silkroad coils and Battle Version RUCAs so that's where I stopped.

[overb0ost]

for the people that have tanabe sways, what endlinks did you use?

[Cloud9]

Double post...

[cmedrift240]

S.Tech Tein Lowering Springs, KYB AGX-R shocks and struts, TC Sportline Lower tie bar and strut bars, TEIN tie rods, Eibach Camber bolts, and TEIN Rear Adjustable Camber Arms

[ThatGuy]

All SPL.

KTS Coilovers
Tension Rods
RUCA's
Subframe Spacers
Traction Rods

Still need Toe Rods and Sway Bars.

[Dousan_PG]

SPL parts.com
RUCAS
Toe links
TC rods

Stance Coilovers 9/7kg
custom front stance, shorter spring
gr+ rear

subframe spacers
spl tie rod ends
tein tie rods + spacers
stock sway bars

safety 21 7pt roll cage w/ side bars.
yeah booooooooyeeeeeeeeee

[LookOut Nick]

Jic FLat1's
Jic tension rods
Supension techniques F/R Sways
Hyper Flex Bushings
SumFrame Spacers
Silroad Rucas

[NemeGuero]

Stance coilovers
Kazama tension rods
Nismo power brace
Kazama RUCAs

[TheSquidd]

Silkroad Coilovers, maxxed out low, all stiff and shiz.

Kazama Tension rods, some added caster, home alignment FTW.

What's the point of this thread? It's like that modifications list thread. Everyone just hits reply and doesn't read any of it.

[LB.Motoring]

Originally Posted by TheSquidd

Silkroad Coilovers, maxxed out low, all stiff and shiz.

Kazama Tension rods, some added caster, home alignment FTW.

What's the point of this thread? It's like that modifications list thread. Everyone just hits reply and doesn't read any of it.

we all need to know whos to steal first

yah no point whatsoever

if it makes a diff

apexi, battle ver.

[Id RaThEr DrIfT]

Tien he coilovers
cusco tension rods
and thats about it as of now

[ronmcdon]

don't have much...

-spl v2 front tension rods
-phase 2. subframe collars

[mr_240sx]

gp sports gr-6 coilovers and every stock suspension arm replaced with kazama parts.

[sncs14]

Nismo power brace
SPL v2 tension rods
Nismo FLCA bushings
ES steering rack bushings, the round one has a few sheet metal shims
ES swaybars F&R
Nismo front and rear strut braces
Tein HE
SPL toe and traction arms
Cusco RUCA
Kazama subframe spacers
Du-luck cross brace

Front: Camber -2.3, Caster 6.3, Toe .11 in
Rear: Camber -2.3, Toe .03 in


Ordering some SPL tie rods soon to kill some of the bumpsteer

[eswop]

I`m Still working on it..
Money is alwas an issue..


Tein Flex
Energy Hyperflex Bushing Kit
Hardrace tie rods/ends
Megan Strut Bar F&R
Rear lower tie bar

[articdragon192]

Tein Flex
Peak Performance Toe Rods
Alignment at Hiro's

[redsuns3838]

Car; base model S14

Suspension: Silk Road RM/A8, NAMS tension rods.
Next stuff: RUCA/traction rods, and a rear sway bar..

[skylinekin]

Cusco Comp-s Coilovers W/ camber plates and pillowball mounts
RUCAS
Lower Brace
Toe Control Arms
Traction Arms
Subframe Spacers

[NemeGuero]

I read it Squidd! lol.. but not really