Nardi install in progress, 1 quick question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

khilgers · 01-09-2008, 09:08 PM

I'm in the middle of installing my Nardi wheel, WB hub, and WB Rapfix II quick release. I had 1 ? concerning the resistor that is included to cancel out the airbag warning light. The hub and quick release came with 2 different resistors. 1 with a clip on the end, and another with just the fuse and 2 prongs. I used the 1 with the 2 prongs and inserted it into the factory SRS harness.

My ? is does it matter which way the resistor goes, I would imagine not since it is just sending a signal through the fuse and back. Heres a pic, and I also just wanted to make sure I had the other wiring correct. Let me know if you see anything out of the ordinary.

deesz · 01-10-2008, 12:48 AM

no it does not matter what way the resistor goes it is not a diode. it is a resistor it resist in any direction.....
as for everything else it seems fine but kinda hard to tell from pictures

MA JasonG · 01-10-2008, 12:53 AM

^correct, and it looks like your ok on the rest of the wiring.

deesz · 01-10-2008, 12:53 AM

i actually have a Question.. did you measure the resistance of the resistor
there was a Q asked earlier about how to turn off the airbag light.

azndoc · 01-10-2008, 12:54 AM

I'm not too $ure $ince I've never in$talled the WB and not on a $14.

I'm $ure the be$t per$on to a$k would be Logan at A$pec.

He know$ hi$ WB $hit.

Fries · 01-10-2008, 01:07 AM

Quote:

Originally Posted by azndoc

I'm not too I've never in the WB and not on a $14.

I'm the be per to a would be Logan at A.

He know$ hi$ WB .

You missed one

+1 for a question that I'd soon be asking!

94cc0rd · 01-10-2008, 09:10 AM

actually since its dealing with s14s you should definately talk to Tuan over at aspec... but from the one picture I can see... it seems like you've got everything right... tuan helped me install my wb hub too.

sTalnOut · 01-14-2008, 03:34 PM

whats fuse are you using to connect together?

4bangers · 03-05-2008, 02:21 AM

so QR also comes with resister for SRS light? I thought just the hub does that?

*downshift_sideways* · 03-05-2008, 02:49 AM

It does not matter which way you clip the resistors.

Your wiring is all correct.

-the.k.w.c- · 03-05-2008, 12:24 PM

i didnt even add anything onto the air bag light wire when i did my momo wheel the air bag light went off after i left the battery off and it reset the ecu

01-09-2008, 09:08 PM	#1
khilgers Zilvia Addict Join Date: Oct 2005 Location: Twin Cities Age: 44 Posts: 893 Trader Rating: (0) Rides Gallery: khilgers Feedback Score: 0 reviews	Nardi install in progress, 1 quick question I'm in the middle of installing my Nardi wheel, WB hub, and WB Rapfix II quick release. I had 1 ? concerning the resistor that is included to cancel out the airbag warning light. The hub and quick release came with 2 different resistors. 1 with a clip on the end, and another with just the fuse and 2 prongs. I used the 1 with the 2 prongs and inserted it into the factory SRS harness. My ? is does it matter which way the resistor goes, I would imagine not since it is just sending a signal through the fuse and back. Heres a pic, and I also just wanted to make sure I had the other wiring correct. Let me know if you see anything out of the ordinary.

01-10-2008, 09:10 AM	#7
94cc0rd Nissanaholic! Join Date: Apr 2005 Location: Los Angeles, CA Age: 38 Posts: 2,390 Trader Rating: (8) Rides Gallery: 94cc0rd Feedback Score: 8 reviews	actually since its dealing with s14s you should definately talk to Tuan over at aspec... but from the one picture I can see... it seems like you've got everything right... tuan helped me install my wb hub too. __________________

03-05-2008, 02:49 AM	#10
downshift_sideways No Limit Soldier. Join Date: Jan 2006 Location: Hayward CA, San Gabriel CA Age: 38 Posts: 5,550 Trader Rating: (0) Rides Gallery: downshift_sideways Feedback Score: 0 reviews	It does not matter which way you clip the resistors. Your wiring is all correct. __________________ allntrlundrgrnd: "you never really appreciate your parents fridge until you look into your own and its full of condiments only"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-10-2008, 12:48 AM	#2
deesz Leaky Injector Join Date: Nov 2007 Location: nor cal Age: 39 Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	no it does not matter what way the resistor goes it is not a diode. it is a resistor it resist in any direction..... as for everything else it seems fine but kinda hard to tell from pictures

01-10-2008, 12:53 AM	#3
MA JasonG Zilvia Member Join Date: Jan 2008 Location: Orlando Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	^correct, and it looks like your ok on the rest of the wiring.

01-10-2008, 12:54 AM	#5
azndoc Post Whore! Join Date: Feb 2006 Location: Los Angeles Age: 43 Posts: 9,487 Trader Rating: (47) Rides Gallery: azndoc Feedback Score: 47 reviews	I'm not too $ure $ince I've never in$talled the WB and not on a $14. I'm $ure the be$t per$on to a$k would be Logan at A$pec. He know$ hi$ WB $hit.

01-14-2008, 03:34 PM	#8
sTalnOut Zilvia Member Join Date: Jun 2006 Location: crooklyn,NYC Age: 41 Posts: 286 Trader Rating: (2) Feedback Score: 2 reviews	whats fuse are you using to connect together?

03-05-2008, 02:21 AM	#9
4bangers Zilvia Junkie Join Date: Nov 2007 Location: wa Age: 26 Posts: 367 Trader Rating: (3) Feedback Score: 3 reviews	so QR also comes with resister for SRS light? I thought just the hub does that?

03-05-2008, 12:24 PM	#11
-the.k.w.c- Leaky Injector Join Date: Mar 2006 Location: Edmonton Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	i didnt even add anything onto the air bag light wire when i did my momo wheel the air bag light went off after i left the battery off and it reset the ecu