camshaft question? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dingwing · 06-02-2008, 05:56 PM

hello everyone, im trying to help my friend put back togther his sr. i dont really know much about motors. i wanted to know how do you know if you put the camshafts back in right and what will happen if they are not in right?

aNskY · 06-02-2008, 06:40 PM

you follow the fsm. it's pretty hard to screw up.

infinitexsound · 06-02-2008, 08:30 PM

theres these tabs on the ends of the cams... its where u bolt up the cam sprockets... the longer the tab... signifies if its the one used for the exhaust side because of the dizzy..

chances are if you dont align the cam sprockets right... with the timing chain markings and piston #1 to TDC.... starting it up you might not even run... or you could bend a valve...

*fliprayzin240sx* · 06-02-2008, 09:57 PM

You cant fuck up putting on the cams, what you can fuck up on is the mechanical timing and you bending the fucking valves if theyre off.

Not sure how much of the engine is apart or put back together but I'd start from scratch and follow the FSM. Make sure the bottom end is at TDC, double check the chain and make sure the marks are where theyre supposed to be. If those 2 are good, then putting the cams on and re-aligning the marks with the use of the chain marks is gonna be cake.

infinitexsound · 06-03-2008, 11:32 PM

you use cake as much as i use cake... lets go get some cake....

06-02-2008, 08:30 PM	#3
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 42 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	theres these tabs on the ends of the cams... its where u bolt up the cam sprockets... the longer the tab... signifies if its the one used for the exhaust side because of the dizzy.. chances are if you dont align the cam sprockets right... with the timing chain markings and piston #1 to TDC.... starting it up you might not even run... or you could bend a valve... __________________ S14 TrackSlut coming to a raceway near you... 510 TimeAttack on its way...

06-02-2008, 09:57 PM	#4
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	You cant fuck up putting on the cams, what you can fuck up on is the mechanical timing and you bending the fucking valves if theyre off. Not sure how much of the engine is apart or put back together but I'd start from scratch and follow the FSM. Make sure the bottom end is at TDC, double check the chain and make sure the marks are where theyre supposed to be. If those 2 are good, then putting the cams on and re-aligning the marks with the use of the chain marks is gonna be cake. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

06-03-2008, 11:32 PM	#5
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 42 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	you use cake as much as i use cake... lets go get some cake.... __________________ S14 TrackSlut coming to a raceway near you... 510 TimeAttack on its way...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-02-2008, 05:56 PM	#1
dingwing Join Date: Mar 2007 Location: NA Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	camshaft question? hello everyone, im trying to help my friend put back togther his sr. i dont really know much about motors. i wanted to know how do you know if you put the camshafts back in right and what will happen if they are not in right?

06-02-2008, 06:40 PM	#2
aNskY Nissanaholic! Join Date: Apr 2005 Location: NY Age: 41 Posts: 1,604 Trader Rating: (10) Feedback Score: 10 reviews	you follow the fsm. it's pretty hard to screw up.