OR WA" S13 Coupe RHD Shell, version select dmax origin!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sblack13 · 12-10-2008, 12:54 AM

I am selling my 1989 RHD Shell.
I've only owned this for a couple months.
And the build is pretty much brand new.
I'm forced to sell it due to me leaving for the Air Force
I would honestly keep it, but I don't know where i'll be stationed.
So its wise for me to give up my toys, at least for the time being.
With that being said lets get on to the actual car.

This particular shell is an 1989 Model, it has a clean title.
Virtually no rust on the car, very straight.
The whole car has been stitch welded from up top.
I can pretty much jack the car up with stock suspension and 3 wheels will lift off the ground.
The RHD was done professionally by Xtreme Auto Salon including the RHD wiper cowel and everything else that should be done with a good conversion.
This typical conversion would cost around $2000 to do.
The car is using the stock usdm rear harness already converted to work. And the front chassis harness is a JDM S13 Silvia harness.
So yes fog lights are wired in. And no extra relay box for the pop up lights.
The doors are also converted to RHD power window spec, meaning all the master controls for the windows are on the JDM driver side.
This car was also a base model from the factory, usually meaning no sunroof. And yes no sunroof on this car is present.

For interior I've installed a JDM RHD S13carpet it is still very clean. And is black in color.
Sentra seatbelt are included.
It has power folding mirrors which still need to be wired in.
All heater boxes and such is still present.
With the addition of a working Digital Climate Control.
Dash has a few cracks, nothing too ob surd to make it unworthy.
Car all the factory 5speed parts.

The car also has a Sugoi Style (custom haha) metal steering bushing. And peak preformance rack bushings.

The exterior has Version Select Type III aero kit. And is pretty much in great shape. Although I had a minor mishap with the front bumper, it isn't all that bad. But should be easy to make mint once again. The rear overfenders are 30mm and are Origin, again great products. The fronts are 30mm? DMAX fenders, and they also fit awesome.
The taillights are the altezza style lights. Great Condition.
The headlights are Dual Projectors w/ Circuit Sport Headlight clear lenses.
The hood is stock and the wiper holes were filled professionally.
The paint is a single stage paint. Its a Blueish Green and I get tons of compliments on it everyday. Everything was painted, underneath the carpet. Underside of hood/trunk. It is all painted.

Turns heads everywhere.

You roll up anywhere your asking for attention, and believe me this car gets tons of it. You love being an attention whore? Buy this.

I'm willing to sell the shell for $4000

but..........

for the S15 sub frame, Kazama Subframe Spacers, Welded diff, and with all the adjustable rear links and front links, with the addition of a completely working Kouki 180sx Gauge Cluster, and Walbro Fuel Pump i want $4500.

i'm willing to take a stock 240sx in on a trade in. Meaning it would lower the price of this vehicle. No other vehicle will be accepted.

I have a DOHC ka, I can sell with the purchase of this car.

Everything is legal, recently tabbed and registration is up to date.
Title is in my hand and In my name.

If i did'nt mention it in the ad its probably not included. I.E SR. lol.

My phone number is 253-203-5177.

Thank You- Rory.

wow-thats-a-cool-car · 12-10-2008, 01:32 PM

why a bride passange seat and a 180sx driver lol?

CIutchCollidE · 12-10-2008, 07:27 PM

thats pretty clean bro! glws

WangonwWarrior · 12-10-2008, 08:02 PM

This is the only shell I would pay $4k for, nice work man hate to see you having to sell it

sblack13 · 12-10-2008, 10:29 PM

well i had a lhd hatch with all these parts in it.
I just swapped everything over into this shell.
I got the shell for $2000 already rhd no paint. Without a front end no nothing.
So theres how i stand on my price, its a great deal if you ask me.
I just did'nt have the money atm to buy a driver's seat rail haha.
its really a nice car, sure it lacked wheels.
but i could never get anyone on here to sell me their nice wheels haha.
so i decided to part it out sooner than expected.

onevia drift · 12-10-2008, 10:38 PM

free bump for you sir!,,..

CLEAN ass shell ... GLWS!

The_Reaper · 12-14-2008, 12:54 AM

bump for rory

SlideWell · 12-14-2008, 12:59 AM

im diggin this car...

sblack13 · 12-14-2008, 09:55 AM

thanks guys. I will trade for a stock 240sx + cash also

Xclusive_racer · 01-15-2009, 10:04 PM

Check my pics of my 240sx let me know!

sblack13 · 01-15-2009, 11:04 PM

sorry man, its no longer for sale.
Gave my brother the vehicle.

12-10-2008, 12:54 AM	#1
sblack13 Zilvia FREAK! Join Date: May 2005 Location: Seattle Age: 38 Posts: 1,016 Trader Rating: (10) Feedback Score: 10 reviews	WA" S13 Coupe RHD Shell, version select dmax origin!!! I am selling my 1989 RHD Shell. I've only owned this for a couple months. And the build is pretty much brand new. I'm forced to sell it due to me leaving for the Air Force I would honestly keep it, but I don't know where i'll be stationed. So its wise for me to give up my toys, at least for the time being. With that being said lets get on to the actual car. This particular shell is an 1989 Model, it has a clean title. Virtually no rust on the car, very straight. The whole car has been stitch welded from up top. I can pretty much jack the car up with stock suspension and 3 wheels will lift off the ground. The RHD was done professionally by Xtreme Auto Salon including the RHD wiper cowel and everything else that should be done with a good conversion. This typical conversion would cost around $2000 to do. The car is using the stock usdm rear harness already converted to work. And the front chassis harness is a JDM S13 Silvia harness. So yes fog lights are wired in. And no extra relay box for the pop up lights. The doors are also converted to RHD power window spec, meaning all the master controls for the windows are on the JDM driver side. This car was also a base model from the factory, usually meaning no sunroof. And yes no sunroof on this car is present. For interior I've installed a JDM RHD S13carpet it is still very clean. And is black in color. Sentra seatbelt are included. It has power folding mirrors which still need to be wired in. All heater boxes and such is still present. With the addition of a working Digital Climate Control. Dash has a few cracks, nothing too ob surd to make it unworthy. Car all the factory 5speed parts. The car also has a Sugoi Style (custom haha) metal steering bushing. And peak preformance rack bushings. The exterior has Version Select Type III aero kit. And is pretty much in great shape. Although I had a minor mishap with the front bumper, it isn't all that bad. But should be easy to make mint once again. The rear overfenders are 30mm and are Origin, again great products. The fronts are 30mm? DMAX fenders, and they also fit awesome. The taillights are the altezza style lights. Great Condition. The headlights are Dual Projectors w/ Circuit Sport Headlight clear lenses. The hood is stock and the wiper holes were filled professionally. The paint is a single stage paint. Its a Blueish Green and I get tons of compliments on it everyday. Everything was painted, underneath the carpet. Underside of hood/trunk. It is all painted. Turns heads everywhere. You roll up anywhere your asking for attention, and believe me this car gets tons of it. You love being an attention whore? Buy this. I'm willing to sell the shell for $4000 but.......... for the S15 sub frame, Kazama Subframe Spacers, Welded diff, and with all the adjustable rear links and front links, with the addition of a completely working Kouki 180sx Gauge Cluster, and Walbro Fuel Pump i want $4500. i'm willing to take a stock 240sx in on a trade in. Meaning it would lower the price of this vehicle. No other vehicle will be accepted. I have a DOHC ka, I can sell with the purchase of this car. Everything is legal, recently tabbed and registration is up to date. Title is in my hand and In my name. If i did'nt mention it in the ad its probably not included. I.E SR. lol. My phone number is 253-203-5177. Thank You- Rory.

12-10-2008, 01:32 PM	#2
wow-thats-a-cool-car Post Whore! Join Date: Mar 2008 Location: California Posts: 2,663 Trader Rating: (6) Feedback Score: 6 reviews	why a bride passange seat and a 180sx driver lol? __________________

12-10-2008, 08:02 PM	#4
WangonwWarrior Zilvia FREAK! Join Date: Jan 2008 Location: Amerika24 alabama: Where if your not first..... your last Posts: 1,163 Trader Rating: (15) Feedback Score: 15 reviews	This is the only shell I would pay $4k for, nice work man hate to see you having to sell it __________________

01-15-2009, 10:04 PM	#10
Xclusive_racer Zilvia FREAK! Join Date: Jul 2008 Location: Fort Worth, TX Age: 41 Posts: 1,245 Trader Rating: (21) Feedback Score: 21 reviews	Check my pics of my 240sx let me know! __________________ You Build Cheap! Your Car Will Feel and Drive Cheap!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-10-2008, 07:27 PM	#3
CIutchCollidE Zilvia Junkie Join Date: Sep 2008 Location: Cali Posts: 373 Trader Rating: (1) Feedback Score: 1 reviews	thats pretty clean bro! glws

12-10-2008, 10:29 PM	#5
sblack13 Zilvia FREAK! Join Date: May 2005 Location: Seattle Age: 38 Posts: 1,016 Trader Rating: (10) Feedback Score: 10 reviews	well i had a lhd hatch with all these parts in it. I just swapped everything over into this shell. I got the shell for $2000 already rhd no paint. Without a front end no nothing. So theres how i stand on my price, its a great deal if you ask me. I just did'nt have the money atm to buy a driver's seat rail haha. its really a nice car, sure it lacked wheels. but i could never get anyone on here to sell me their nice wheels haha. so i decided to part it out sooner than expected.

12-10-2008, 10:38 PM	#6
onevia drift Zilvia Addict Join Date: Sep 2008 Location: Frisco/Dallas, TX Posts: 795 Trader Rating: (18) Feedback Score: 18 reviews	free bump for you sir!,,.. CLEAN ass shell ... GLWS!

12-14-2008, 12:54 AM	#7
The_Reaper Zilvia Junkie Join Date: Oct 2006 Location: Seattle Wa Age: 37 Posts: 370 Trader Rating: (2) Feedback Score: 2 reviews	bump for rory

12-14-2008, 12:59 AM	#8
SlideWell Zilvia FREAK! Join Date: Aug 2007 Location: Seattle, WA Age: 41 Posts: 1,591 Trader Rating: (1) Feedback Score: 1 reviews	im diggin this car...

12-14-2008, 09:55 AM	#9
sblack13 Zilvia FREAK! Join Date: May 2005 Location: Seattle Age: 38 Posts: 1,016 Trader Rating: (10) Feedback Score: 10 reviews	thanks guys. I will trade for a stock 240sx + cash also

01-15-2009, 11:04 PM	#11
sblack13 Zilvia FREAK! Join Date: May 2005 Location: Seattle Age: 38 Posts: 1,016 Trader Rating: (10) Feedback Score: 10 reviews	sorry man, its no longer for sale. Gave my brother the vehicle.