CA - KA "DE" Bare Block Good Cond. 89 or 89.5mm Bore - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

let5l1de · 01-14-2009, 11:16 AM

A local machine shop effed up my KA block with a huge gouge on the top of #1 cylinder.

This block is now useless to me since the bore will be closer to 91mm after correcting the machining error. The Wiseco pistons I purchased prior to machine work are 89.5mm. 91mm block with 89.5mm pistons will never work...

I prefer a bare block with or without the front oil pump cover, that has never been machined before. I need a 89.5mm bore size after cleaning up the cylinders.

robiniscool · 01-14-2009, 01:58 PM

pm'd msglength

let5l1de · 01-18-2009, 01:07 AM

Closing this for now. Thanks for all the pm offers!

This is what a junk block looks like... maybe 91mm now after clean up... LMK if anyone need it...

01-18-2009, 01:07 AM	#3
let5l1de Zilvia FREAK! Join Date: Dec 2007 Location: 626DRIFT, ca Posts: 1,420 Trader Rating: (30) Rides Gallery: let5l1de Feedback Score: 30 reviews	Closing this for now. Thanks for all the pm offers! This is what a junk block looks like... maybe 91mm now after clean up... LMK if anyone need it... __________________ GR Performance facebook Pics & More! Comments! http://www.facebook.com/pages/GR-Performance/120477531339202 Read My Sales Review 626 Friday Nights San Gabriel

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-14-2009, 11:16 AM	#1
let5l1de Zilvia FREAK! Join Date: Dec 2007 Location: 626DRIFT, ca Posts: 1,420 Trader Rating: (30) Rides Gallery: let5l1de Feedback Score: 30 reviews	CA - KA "DE" Bare Block Good Cond. 89 or 89.5mm Bore A local machine shop effed up my KA block with a huge gouge on the top of #1 cylinder. This block is now useless to me since the bore will be closer to 91mm after correcting the machining error. The Wiseco pistons I purchased prior to machine work are 89.5mm. 91mm block with 89.5mm pistons will never work... I prefer a bare block with or without the front oil pump cover, that has never been machined before. I need a 89.5mm bore size after cleaning up the cylinders.

01-14-2009, 01:58 PM	#2
robiniscool Zilvia Member Join Date: Oct 2005 Location: CALIFORNIA Posts: 157 Trader Rating: (4) Feedback Score: 4 reviews	pm'd msglength