Battery relocation question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Corey121 · 03-05-2011, 05:46 PM

I understand there is plenty for threads with this topic but im after some questions, What is a good gauge wire to use is it going to hurt anything to run the wires side by side and would it hurt to run it by the ecu?

MisawaJason · 03-06-2011, 03:14 AM

If you understand that there are plenty of threads about this topic, why didn't you browse through them to find the answers that you're asking?

Corey121 · 03-06-2011, 12:10 PM

Quote:

Originally Posted by MisawaJason

If you understand that there are plenty of threads about this topic, why didn't you browse through them to find the answers that you're asking?

Thanks for your two measly cents i have looked through them and i still dont have my answers i have the gauge and i know i need a breaker but i still want to know if it is safe to run the wires side by side and by the ecu. Oh and i dont need any more of your specific two cents, since you not helping at all.

Thanks to everyone else that is try to answer my questions.

orangeNblue · 03-06-2011, 03:15 PM

You shouldn't have any problems running the wires side by side as long as they are covered and there isn't any exposed wires touching. I'm not 100% certain about running it beside the ECU but since that is where the lines are run most of the time, I don't see there being an issue with that either.

Only reason I said something about getting a box is because its not something most people think of and its something that could be beneficial in the long run...

Hope this helps

rbpwr · 03-06-2011, 11:02 AM

just use a 4 gauge amp kit, bonus if you are already running a system

orangeNblue · 03-06-2011, 11:05 AM

There are so many kits out there that you can use. I just bought mine from summit racing. If you're planning on doing this, it'd prolly be a good idea to get a box as well. I went with moroso

jacobs13 · 03-06-2011, 11:05 AM

I use 1/0 gauge wire, 4 gauge is too small, you will get a lot of voltage drop through that long cable, also use a 200A fuse or a breaker

jacobs13 · 03-06-2011, 03:47 PM

I dont understand why people are so confused or questioning the box. its $10 it looks better and its safer, if you cant afford it sell your car, im not talking about this thread specifically but I have heard so much about why do I need a box? As far as the side by side wires there is nothing wrong with that they dont give off anything they are insulated.

Corey121 · 03-06-2011, 04:18 PM

Thank you for clearing everything up, im not questioning the battery box i do plan on getting one and have it vent outside the car or i might just by a gell cell so i dont have to worry about vapors.

Thank you everyone that answered my questions

03-05-2011, 05:46 PM	#1
Corey121 Leaky Injector Join Date: Sep 2009 Location: North Carolina Age: 38 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Battery relocation question I understand there is plenty for threads with this topic but im after some questions, What is a good gauge wire to use is it going to hurt anything to run the wires side by side and would it hurt to run it by the ecu?

03-06-2011, 03:14 AM	#2
MisawaJason Zilvia FREAK! Join Date: Nov 2007 Location: South Korea Age: 40 Posts: 1,320 Trader Rating: (13) Feedback Score: 13 reviews	If you understand that there are plenty of threads about this topic, why didn't you browse through them to find the answers that you're asking? __________________ 1 year tour in Korea = no car. FML.

03-06-2011, 03:15 PM	#4
orangeNblue Join Date: Nov 2008 Location: Alabama Age: 39 Posts: 46 Trader Rating: (1) Feedback Score: 1 reviews	answers You shouldn't have any problems running the wires side by side as long as they are covered and there isn't any exposed wires touching. I'm not 100% certain about running it beside the ECU but since that is where the lines are run most of the time, I don't see there being an issue with that either. Only reason I said something about getting a box is because its not something most people think of and its something that could be beneficial in the long run... Hope this helps

03-06-2011, 11:05 AM	#6
orangeNblue Join Date: Nov 2008 Location: Alabama Age: 39 Posts: 46 Trader Rating: (1) Feedback Score: 1 reviews	battery There are so many kits out there that you can use. I just bought mine from summit racing. If you're planning on doing this, it'd prolly be a good idea to get a box as well. I went with moroso

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-06-2011, 11:02 AM	#5
rbpwr Leaky Injector Join Date: Jan 2011 Location: buffalo new york Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	just use a 4 gauge amp kit, bonus if you are already running a system

03-06-2011, 11:05 AM	#7
jacobs13 Zilvia FREAK! Join Date: May 2009 Location: Long Beach Age: 33 Posts: 1,061 Trader Rating: (27) Feedback Score: 27 reviews	I use 1/0 gauge wire, 4 gauge is too small, you will get a lot of voltage drop through that long cable, also use a 200A fuse or a breaker

03-06-2011, 03:47 PM	#8
jacobs13 Zilvia FREAK! Join Date: May 2009 Location: Long Beach Age: 33 Posts: 1,061 Trader Rating: (27) Feedback Score: 27 reviews	I dont understand why people are so confused or questioning the box. its $10 it looks better and its safer, if you cant afford it sell your car, im not talking about this thread specifically but I have heard so much about why do I need a box? As far as the side by side wires there is nothing wrong with that they dont give off anything they are insulated.

03-06-2011, 04:18 PM	#9
Corey121 Leaky Injector Join Date: Sep 2009 Location: North Carolina Age: 38 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Thank you for clearing everything up, im not questioning the battery box i do plan on getting one and have it vent outside the car or i might just by a gell cell so i dont have to worry about vapors. Thank you everyone that answered my questions