CA FS: 450whp RB20/25 setup turbo/manifold/gate/lines/plumbing(CANADA) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zacho · 05-22-2012, 01:09 PM

Will split up

Details:

-GT3076r .82 - fresh garrett CHRA with 5k on it
-Custom sch40 near equal volume turbo manifold. Leaves lots of room for downpipe. Ceramic coating, has dulled in very tight areas. I built this and an entire thread on the construction of it can be found here: Manifold building adventure .There is no way around it, this is a really nice piece. Sounds really, really good. Not even 1k on it.
-Tial MV-R wastegate - 4k will come with water fittings and all clamps/barbs/fittings
-10an aluminum oil drain adapter.
-A mix of summit/earls fittings for the oil/coolant lines
-ATP -4 restrictor
-3/4BSPT to -10 oil drain block adapter
-metric to AN for coolant & oil feed line(s).
-All assembled hoses
-Custom downpipe & wastegate dump. Downpipe isn't fully shown, there is another piece that joins up to the factory cat location. Downpipe uses a 3'' vband to join the two pieces. 3'' 4bolt flange for the gt30. Has wideband bung. Only thing to note is the 4bolt flange is slightly warped. It seals fine, used it for my past two track days. The downpipe *should* line up with your existing exhaust(s13/r32) but I cannot 100% gaurantee. If it doesn't, it won't need much modification.

PRICE: $2300 + SHIP. Probably in 2 boxes as it all together is heavy & cumbersome.

Notes on setup: Please note the motor mounts used. Not sure what else it will fit. I don't know LHD fitment, But I can find out. Does not allow factory PS res location. Can include PS "U" bend hardline to relocate the res as seen in some pics.

Zacho · 07-28-2012, 06:19 PM

Some additional pics, I can also split it up now.

lrb99 · 07-28-2012, 09:07 PM

How much for the intake pm me

SupaDoopa · 07-28-2012, 09:27 PM

http://zilvia.net/f/sale-items/46776...torsxdmax.html

See anything interesting for the turbo?

s13_rb25 · 07-28-2012, 11:18 PM

OMG i want this so bad. FUhhh i hate being broke

Nismo11 · 07-28-2012, 11:21 PM

That turbo spools so nice. Glws

mikevangs14 · 07-28-2012, 11:26 PM

How much for the oil return line with the fittings for turbo and side of block?

mikevangs14 · 07-28-2012, 11:27 PM

Shipped to 46227? Lol forgot to add that part

Luvs2slide · 07-29-2012, 06:16 AM

Fuck I want this setup. Would drop right into my laurel. Your video is sick man. Its one of the reason I chose the GT30R.

How much for the setup without the turbo?

turbob16ef · 07-29-2012, 07:33 AM

How much for turbo shipped to 29907?

Luvs2slide · 07-29-2012, 08:18 PM

Interested in a trade minues the turbo for a HKS setup + cash?

BoredEE · 07-29-2012, 08:47 PM

Where did you find the BSPT to -10an adaptor? (I must fail at google)

How much do you want for it?

05-22-2012, 01:09 PM	#1
Zacho Zilvia Member Join Date: Jun 2007 Location: Canada Posts: 217 Trader Rating: (5) Feedback Score: 5 reviews	FS: 450whp RB20/25 setup turbo/manifold/gate/lines/plumbing(CANADA) Will split up Details: -GT3076r .82 - fresh garrett CHRA with 5k on it -Custom sch40 near equal volume turbo manifold. Leaves lots of room for downpipe. Ceramic coating, has dulled in very tight areas. I built this and an entire thread on the construction of it can be found here: Manifold building adventure .There is no way around it, this is a really nice piece. Sounds really, really good. Not even 1k on it. -Tial MV-R wastegate - 4k will come with water fittings and all clamps/barbs/fittings -10an aluminum oil drain adapter. -A mix of summit/earls fittings for the oil/coolant lines -ATP -4 restrictor -3/4BSPT to -10 oil drain block adapter -metric to AN for coolant & oil feed line(s). -All assembled hoses -Custom downpipe & wastegate dump. Downpipe isn't fully shown, there is another piece that joins up to the factory cat location. Downpipe uses a 3'' vband to join the two pieces. 3'' 4bolt flange for the gt30. Has wideband bung. Only thing to note is the 4bolt flange is slightly warped. It seals fine, used it for my past two track days. The downpipe should line up with your existing exhaust(s13/r32) but I cannot 100% gaurantee. If it doesn't, it won't need much modification. PRICE: $2300 + SHIP. Probably in 2 boxes as it all together is heavy & cumbersome. Notes on setup: Please note the motor mounts used. Not sure what else it will fit. I don't know LHD fitment, But I can find out. Does not allow factory PS res location. Can include PS "U" bend hardline to relocate the res as seen in some pics. Last edited by Zacho; 07-28-2012 at 06:19 PM..

07-28-2012, 09:07 PM	#3
lrb99 Zilvia Addict Join Date: Apr 2010 Location: Lansing, MI Age: 38 Posts: 600 Trader Rating: (3) Feedback Score: 3 reviews	How much for the intake pm me __________________ .........Whipthis Drifting.........

07-29-2012, 06:16 AM	#9
Luvs2slide Zilvia FREAK! Join Date: Oct 2006 Location: NW Florida Age: 43 Posts: 1,490 Trader Rating: (81) Feedback Score: 81 reviews	Fuck I want this setup. Would drop right into my laurel. Your video is sick man. Its one of the reason I chose the GT30R. How much for the setup without the turbo? __________________

07-29-2012, 08:18 PM	#11
Luvs2slide Zilvia FREAK! Join Date: Oct 2006 Location: NW Florida Age: 43 Posts: 1,490 Trader Rating: (81) Feedback Score: 81 reviews	Interested in a trade minues the turbo for a HKS setup + cash? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-28-2012, 06:19 PM	#2
Zacho Zilvia Member Join Date: Jun 2007 Location: Canada Posts: 217 Trader Rating: (5) Feedback Score: 5 reviews	Some additional pics, I can also split it up now.

07-28-2012, 09:27 PM	#4
SupaDoopa Post Whore! Join Date: Jan 2010 Location: 隠された意図 Age: 37 Posts: 3,689 Trader Rating: (26) Feedback Score: 26 reviews	http://zilvia.net/f/sale-items/46776...torsxdmax.html See anything interesting for the turbo?

07-28-2012, 11:18 PM	#5
s13_rb25 Zilvia Addict Join Date: Jun 2010 Location: Orlando, FL Age: 32 Posts: 725 Trader Rating: (8) Feedback Score: 8 reviews	OMG i want this so bad. FUhhh i hate being broke

07-28-2012, 11:21 PM	#6
Nismo11 Zilvia Addict Join Date: Apr 2012 Location: SGV Posts: 675 Trader Rating: (0) Feedback Score: 0 reviews	That turbo spools so nice. Glws

07-28-2012, 11:26 PM	#7
mikevangs14 Join Date: Oct 2011 Location: indiana Age: 32 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	How much for the oil return line with the fittings for turbo and side of block?

07-28-2012, 11:27 PM	#8
mikevangs14 Join Date: Oct 2011 Location: indiana Age: 32 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	Shipped to 46227? Lol forgot to add that part

07-29-2012, 07:33 AM	#10
turbob16ef Zilvia Junkie Join Date: Jan 2012 Location: S. Carolina Age: 36 Posts: 457 Trader Rating: (13) Feedback Score: 13 reviews	How much for turbo shipped to 29907?

07-29-2012, 08:47 PM	#12
BoredEE Leaky Injector Join Date: Aug 2009 Location: Chicago, IL Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	Where did you find the BSPT to -10an adaptor? (I must fail at google) How much do you want for it?