Work wheels break like Rotas!!!! (pic inside) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

redsx13 · 10-24-2013, 01:29 PM

So a buddy of mine had a slight incident with his s14 and k rail and...

Hmmmm

Chaluska · 10-24-2013, 01:32 PM

Quote:

Originally Posted by redsx13

So a buddy of mine had a slight incident with his s14 and k rail and...

Hmmmm

watch every jdm fanboi die at once.

or defend it with.... "that is a knockoff"

jsu1012 · 10-24-2013, 01:49 PM

lmao .. holy fucking fuck. slight incident!?

5280VertDET · 10-24-2013, 01:50 PM

But... but... you pay for what you get!

EatRice · 10-24-2013, 01:50 PM

would like to see pic of the car - hmmmmmmmm

bigs · 10-24-2013, 01:51 PM

I bet it (the wheel) looked damn good doing it.

boxerpicker · 10-24-2013, 01:52 PM

i gotta find pic of my buddy's old ssr that broke from slight curb hit

hobbs · 10-24-2013, 01:54 PM

+1 for seeing the car...

jsu1012 · 10-24-2013, 01:55 PM

yes , post pics of the car. before and after.. lol.

redsx13 · 10-24-2013, 03:25 PM

Quote:

Originally Posted by jsu1012

yes , post pics of the car. before and after.. lol.

I will post a pic of the car, but it with a new rear lca, the car will be drivable..

racepar1 · 10-24-2013, 03:27 PM

Quote:

Originally Posted by redsx13

I will post a pic of the car, but it with a new rear lca, the car will be drivable..

Oh, now we find out that he bent the fucking control arm. That's not a "minor" incident with a guardrail. OF COURSE the wheel broke if it got hit hard enough to bend the LCA. Those things aren't flimsy...

waxball88 · 10-25-2013, 09:02 AM

Quote:

Originally Posted by racepar1

Oh, now we find out that he bent the fucking control arm. That's not a "minor" incident with a guardrail. OF COURSE the wheel broke if it got hit hard enough to bend the LCA. Those things aren't flimsy...

Yes they are, it only takes hitting it at the right angle. My friend hit a curb powered through shaving his xxr wheels pretty good, bent the LCA, and the wheel although beat up was fine. Swapped LCA and drove it home that night.

Quote:

Originally Posted by fliprayzin240sx

Well, in Works defense, didnt BlackzenkiS14 drift slammed his rear end at 60mph into a k-rail? He shifted the whole trunk and shattered his rear windows and his Work Equips survived. Those rims are on his new S14 IIRC.

Yes marshall did wall ride , The wheels never hit the wall the hard( if at all) rear end of his car took all the damage.

I'm not saying this to defend rota/xxr/ or work, but people gotta stop making up excuses to flaunt their brand loyalty. A wheel is a wheel, hit it hard enough in the right spot it'll fucking break. I've seen almost any OEM (omgtehbest) wheel destroyed in any sort of way. There is no exception for work or any other wheel company.

racepar1 · 10-25-2013, 09:44 AM

Quote:

Originally Posted by waxball88

Yes they are, it only takes hitting it at the right angle. My friend hit a curb powered through shaving his xxr wheels pretty good, bent the LCA, and the wheel although beat up was fine. Swapped LCA and drove it home that night.

If you hit somehting hard enough to bend the LCA you deserve to break the wheel. PERIOD... Who the fuck cares if an XXR somehow miraculously survived. The XXR probably weighed twice as much and hit at a different angle. I bet you that wheel was bent up to hell and not safe to drive on anyways. That Work DID NOT break like a Rota or any other wheel. It broke like a wheel that got rammed into a K-rail. That's COMPLETELY different...

Quote:

I'm not saying this to defend rota/xxr/ or work, but people gotta stop making up excuses to flaunt their brand loyalty. A wheel is a wheel, hit it hard enough in the right spot it'll fucking break. I've seen almost any OEM (omgtehbest) wheel destroyed in any sort of way. There is no exception for work or any other wheel company.

Tasteless dumbfucks need to stop trying to justify their cheap-ass wheel purchases with retarded threads, heresay, and mis-information. There are a lot of reasons to buy a quality wheel rather than a cheap-o POS, none of those reasons are related to surviving a hit with a k-rail.

*fliprayzin240sx* · 10-24-2013, 02:00 PM

Hits a k-rail, cars totaled and expects rim to be salvageable? Make it better, its Work's casted wheels...

ZacKisBacK_Fr · 10-24-2013, 02:12 PM

^^ exactly what he said, those are not forged, you can see it where it's broken, so not very surprising!

/thread

racepar1 · 10-24-2013, 02:26 PM

Wait a minute, let me get this straight.

Your buddy hit a K-rail and broke a wheel and somehow it's the wheel's fault???

Wheels aren't meant to hit stuff. If you hit stuff the wrong way any wheel can break, ESPECIALLY a lightweight wheel...

OBEEWON · 10-24-2013, 02:37 PM

I wanna see a picture of the K-Rail.
Made in Russia.
Why do we use K-Rails at drift events?
We should just use bouncy castles full of sex offenders.

Death Row: "It's a party till someone bangs out."

racepar1 · 10-24-2013, 02:38 PM

Quote:

Originally Posted by OBEEWON

I wanna see a picture of the K-Rail.
Made in Russia.
Why do we use K-Rails at drift events?
We should just use bouncy castles full of sex offenders.

Something tells me this wasn't a drift event...

zerodameaon · 10-24-2013, 02:55 PM

Quote:

Originally Posted by OBEEWON

I wanna see a picture of the K-Rail.
Made in Russia.
Why do we use K-Rails at drift events?
We should just use bouncy castles full of sex offenders.

Death Row: "It's a party till someone bangs out."

Uh... yeah...

As for the rim what was he expecting?

One of these days when I have a the money to destroy a car and a rota and a work I will hit a curb straight on and see what happens. I doubt either one will fair very well.

*kingkilburn* · 10-24-2013, 02:59 PM

The only wheel that might stand up to that and still look like a wheel would be a hardcore steel wheel that weighs 40 pounds. I don't know what you or he was expecting.

1quk240 · 10-24-2013, 03:17 PM

Posts' rant...not the response he was expecting...

*fliprayzin240sx* · 10-24-2013, 10:36 PM

Quote:

Originally Posted by kingkilburn

The only wheel that might stand up to that and still look like a wheel would be a hardcore steel wheel that weighs 40 pounds. I don't know what you or he was expecting.

Well, in Works defense, didnt BlackzenkiS14 drift slammed his rear end at 60mph into a k-rail? He shifted the whole trunk and shattered his rear windows and his Work Equips survived. Those rims are on his new S14 IIRC.

chris_240sx · 10-24-2013, 11:40 PM

Quote:

Originally Posted by fliprayzin240sx

Well, in Works defense, didnt BlackzenkiS14 drift slammed his rear end at 60mph into a k-rail? He shifted the whole trunk and shattered his rear windows and his Work Equips survived. Those rims are on his new S14 IIRC.

Matej · 10-24-2013, 03:19 PM

How embarrassing for your buddy.

Jfitzg38 · 10-24-2013, 03:23 PM

Pics of car and pics of k-rail.

KOUKIboy · 10-24-2013, 03:24 PM

Post pics of before and after or car please, wanna see the damage....

*kingkilburn* · 10-24-2013, 10:51 PM

Saving money on a new wheel is not worth the risk of micro fractures and a bent wheel.

*brndck* · 10-24-2013, 11:06 PM

judging by the photos he smacked that wheel pretty damn hard, why would you expect it to fare well??? its a cast wheel, not forged.

i've destroyed enkeis and panasports before. if you smash it into a curb or k-rail, shits gonna break. a k-rail is the better part of a TON of concrete. why would you expect a 25 lb wheel to survive??? Rotas are known for having this happen from POTHOLES.

your argumintz laks knowlidge. plz try agin l8r.

racepar1 · 10-24-2013, 11:16 PM

Quote:

Originally Posted by brndck

your argumintz laks knowlidge. plz try agin l8r.

That about sums it up, and in a manner that the OP can perhaps understand...

SlmdCpe · 10-30-2013, 12:44 AM

Quote:

Originally Posted by racepar1

That about sums it up, and in a manner that the OP can perhaps understand...

Bump.

Fail ass thread.

10-24-2013, 01:29 PM	#1
redsx13 Zilvia Junkie Join Date: Jan 2009 Location: Agoura Hills, Ca Age: 34 Posts: 572 Trader Rating: (6) Feedback Score: 6 reviews	Work wheels break like Rotas!!!! (pic inside) So a buddy of mine had a slight incident with his s14 and k rail and... Hmmmm

10-24-2013, 01:49 PM	#3
jsu1012 Zilvia FREAK! Join Date: May 2011 Location: Oklahoma Age: 39 Posts: 1,122 Trader Rating: (13) Feedback Score: 13 reviews	lmao .. holy fucking fuck. slight incident!? __________________ @streetstyle_jay

10-24-2013, 01:50 PM	#4
5280VertDET Nissanaholic! Join Date: Aug 2013 Location: Denver Age: 41 Posts: 2,052 Trader Rating: (14) Feedback Score: 14 reviews	But... but... you pay for what you get! __________________ S13 Vert \| SR \| PE1420 \| 5-Speed \| 15x9.5 - 0 \|

10-24-2013, 01:55 PM	#9
jsu1012 Zilvia FREAK! Join Date: May 2011 Location: Oklahoma Age: 39 Posts: 1,122 Trader Rating: (13) Feedback Score: 13 reviews	yes , post pics of the car. before and after.. lol. __________________ @streetstyle_jay

10-24-2013, 02:00 PM	#14
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Hits a k-rail, cars totaled and expects rim to be salvageable? Make it better, its Work's casted wheels... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

10-24-2013, 01:50 PM	#5
EatRice Leaky Injector Join Date: Jun 2011 Location: not at your house Age: 55 Posts: 141 Trader Rating: (4) Feedback Score: 4 reviews	would like to see pic of the car - hmmmmmmmm

10-24-2013, 01:51 PM	#6
bigs Nissanaholic! Join Date: Sep 2007 Location: Atlanta Age: 34 Posts: 1,674 Trader Rating: (6) Feedback Score: 6 reviews	I bet it (the wheel) looked damn good doing it.

10-24-2013, 01:52 PM	#7
boxerpicker Join Date: Sep 2013 Location: snohomish, wa Age: 32 Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	i gotta find pic of my buddy's old ssr that broke from slight curb hit

10-24-2013, 01:54 PM	#8
hobbs Nissanaholic! Join Date: Aug 2010 Location: Under a rock Posts: 2,264 Trader Rating: (43) Feedback Score: 43 reviews	+1 for seeing the car...

10-24-2013, 02:12 PM	#15
ZacKisBacK_Fr Leaky Injector Join Date: Sep 2012 Location: France Age: 47 Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	^^ exactly what he said, those are not forged, you can see it where it's broken, so not very surprising! /thread __________________

10-24-2013, 02:26 PM	#16
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Wait a minute, let me get this straight. Your buddy hit a K-rail and broke a wheel and somehow it's the wheel's fault??? Wheels aren't meant to hit stuff. If you hit stuff the wrong way any wheel can break, ESPECIALLY a lightweight wheel...

10-24-2013, 02:37 PM	#17
OBEEWON Post Whore! Join Date: Feb 2006 Location: Hightened State of Emergency Posts: 6,053 Trader Rating: (9) Feedback Score: 9 reviews	I wanna see a picture of the K-Rail. Made in Russia. Why do we use K-Rails at drift events? We should just use bouncy castles full of sex offenders. Death Row: "It's a party till someone bangs out." __________________

10-24-2013, 02:59 PM	#20
kingkilburn Philosopher King Join Date: Aug 2006 Location: FresYes Posts: 3,042 Trader Rating: (0) Feedback Score: 0 reviews	The only wheel that might stand up to that and still look like a wheel would be a hardcore steel wheel that weighs 40 pounds. I don't know what you or he was expecting. __________________ G O L D E N B E A R R E P U B L I C

10-24-2013, 03:17 PM	#21
1quk240 Banned from the Marketplace Join Date: Mar 2007 Location: Planet Earth Posts: 768 Trader Rating: (21) Feedback Score: 21 reviews	Posts' rant...not the response he was expecting...

10-24-2013, 03:19 PM	#24
Matej Post Whore! Join Date: Feb 2007 Location: N/A Posts: 9,423 Trader Rating: (39) Feedback Score: 39 reviews	How embarrassing for your buddy.

10-24-2013, 03:23 PM	#25
Jfitzg38 Zilvia Junkie Join Date: Nov 2011 Location: New Lenox IL Posts: 527 Trader Rating: (8) Feedback Score: 8 reviews	Pics of car and pics of k-rail.

10-24-2013, 03:24 PM	#26
KOUKIboy Post Whore! Join Date: Jan 2007 Location: Arizona Age: 38 Posts: 2,608 Trader Rating: (23) Feedback Score: 23 reviews	Post pics of before and after or car please, wanna see the damage.... __________________ [SIGPIC][/SIGPIC] http://wheelflip.com/r/Wheelwhore87

10-24-2013, 10:51 PM	#27
kingkilburn Philosopher King Join Date: Aug 2006 Location: FresYes Posts: 3,042 Trader Rating: (0) Feedback Score: 0 reviews	Saving money on a new wheel is not worth the risk of micro fractures and a bent wheel. __________________ G O L D E N B E A R R E P U B L I C

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode