TX 1989 Toyota Cressida : 1jzgte Twin Turbo, Coilovers, JZX81 mark II complete front end - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TexRex · 08-07-2014, 03:30 PM

For sale is my 1jz swapped cressida. Runs amazing with no smoking, cel's, or hesitation. Interior is soo damn comfy. I've had quite a few cars and with the new suspension components, arms, bushings, rods, and alignment this car handles amazingly. Everything is right with no play whatsoever and very responsive. Feels like I'm driving my 180sx.

Contact information
text to 832-491-3511

Year
1989

Make and model
Toyota Cressida

Mileage
117k on shell and 55k on swap

Transmission type
Automatic

Title status
Clean Clear Texas Blue Title

Asking price
$6,500

Modifications
Yes

-----------------------------------------------------
Additional information and mods

1JZ-GTE w/ Rebuilt AUTO for STREET
Installed, wired up, and tuned by Grip Industries, Melbourne, Florida (www.grip-industries.com)

Makes 333 rwhp and 309 rwtq

Exterior:
JZX81 MarkII, complete front end conversion and fenders with marker lights

Engine and Transmission:
2JZ - GTE injectors
Walbro fuel pump
Z32 brakes installed in front
New brake pads & rotors for front & rear
New Water pump
New Alternator
New NGK Spark plugs
Custom IC piping and EBay intercooler
B&M Transmission cooler
2JZ-GTE fan and cooling components
Driftmotion Power Steering SS hose
HKS turbo timer
Greddy profec b Boost Controller
Greddy 3 inch downpipe
Apexi S-AFC controller
3 inch custom exhaust piping straight pipe
Vibrant Ultra Quiet Resonator
4.30 Rear End with MKIII LSD
Tail 50mm Blow of Valve
Auotmeter Boost Gauge
Battery Relocation Kit in the trunk
4.30 Speedo Gear

Suspension and Wheels:
Megan Coilovers
New Timken front and rear wheels bearings
New Moog Inner & Outer tie rod ends
New re-build steering rack and pinion (life time warranty)
New Steering rack bushings
New Steering Damper
XM Solid Sub frame Bushings installed
XM Solid Differential Bushings installed
XM Rear Lower Pillow Ball installed
XM Rear Upper Control Arm Bushings installed
TSW Kaylami wheels, 18X9+20
Rear: Hankook tires – 215/45/18 (80% left)
Front: Mayrun tires – 215/40/18 (70% Left)

- EVERYTHING WORKS except the cruise control button, A/C blows ice cold, power windows & locks, climate control switches all work as they should. All lights work as they should.

Bads:
Matching paint needed and touchups around the exterior. Front passenger side fender needs a little bondo whenever it gets painted.

FAST fun daily!!!!!!!!!!!!!

TexRex · 08-09-2014, 04:06 PM

bump numero uno

StoneS14 · 08-10-2014, 02:44 PM

i was interested in the toyota if want to pm me and we can talk about it

TexRex · 08-12-2014, 02:12 AM

Bump for a Tuesday morning

TexRex · 08-13-2014, 03:49 PM

Bump for a Wednesday afternoon

TexRex · 08-15-2014, 11:01 AM

bump for the weekend

rinaudo · 08-15-2014, 12:02 PM

Why are you selling it? You just bought it.

TexRex · 08-15-2014, 12:35 PM

Quote:

Originally Posted by rinaudo

Why are you selling it? You just bought it.

I owe my body shop $3,600 for my rx7 which is coming out 3 weeks ahead of schedule and I must pay for it. Selling the cressida for that reason alone. Nothing more, nothing less. The car is as advertised and has been an absolute pleasure.

okinawa86 · 08-16-2014, 11:35 AM

Would you let it go for anything less than 6,000.00? I do not need the wheels. Thanks.

TexRex · 08-16-2014, 05:50 PM

Quote:

Originally Posted by okinawa86

Would you let it go for anything less than 6,000.00? I do not need the wheels. Thanks.

pm'ed you on that

CoalieG · 09-02-2014, 11:48 PM

Still for sale?

Build4Boost · 09-10-2014, 07:14 AM

Where did you get the front end from. I have been searching for about a year and a half now

600hpsti · 09-17-2014, 09:21 AM

Quote:

Originally Posted by Build4Boost

Where did you get the front end from. I have been searching for about a year and a half now

I have this front forsale pm me if interested.

Glws clean car

smolik769 · 09-16-2014, 03:53 PM

Elady on Ebay for the Front/Rear bumpers...

Almighty So · 09-17-2014, 05:14 PM

need this front end for my cressida..

edit: can't stop staring at this car. want that front end.
also, can vouch that cressida interiors are suuuuuper comfortable. real early 90's japanese luxury.

94_soarer · 09-28-2014, 08:22 AM

I knew this car looked familiar, bump for a great car and done right from Grip Industries! They did my SC years ago and still running strong with no issues!!

TexRex · 10-01-2014, 03:27 PM

sorry guys close thread. I just now got out of hospital. Car was totaled on my way home from work a couple weeks ago as a kid under the influence hit me going 120+ on the freeway. Cars completely totaled horribly and obviously no longer available.

08-07-2014, 03:30 PM	#1
TexRex Leaky Injector Join Date: Jun 2008 Location: Houston Age: 45 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	1989 Toyota Cressida : 1jzgte Twin Turbo, Coilovers, JZX81 mark II complete front end For sale is my 1jz swapped cressida. Runs amazing with no smoking, cel's, or hesitation. Interior is soo damn comfy. I've had quite a few cars and with the new suspension components, arms, bushings, rods, and alignment this car handles amazingly. Everything is right with no play whatsoever and very responsive. Feels like I'm driving my 180sx. Contact information text to 832-491-3511 Year 1989 Make and model Toyota Cressida Mileage 117k on shell and 55k on swap Transmission type Automatic Title status Clean Clear Texas Blue Title Asking price $6,500 Modifications Yes ----------------------------------------------------- Additional information and mods 1JZ-GTE w/ Rebuilt AUTO for STREET Installed, wired up, and tuned by Grip Industries, Melbourne, Florida (www.grip-industries.com) Makes 333 rwhp and 309 rwtq Exterior: JZX81 MarkII, complete front end conversion and fenders with marker lights Engine and Transmission: 2JZ - GTE injectors Walbro fuel pump Z32 brakes installed in front New brake pads & rotors for front & rear New Water pump New Alternator New NGK Spark plugs Custom IC piping and EBay intercooler B&M Transmission cooler 2JZ-GTE fan and cooling components Driftmotion Power Steering SS hose HKS turbo timer Greddy profec b Boost Controller Greddy 3 inch downpipe Apexi S-AFC controller 3 inch custom exhaust piping straight pipe Vibrant Ultra Quiet Resonator 4.30 Rear End with MKIII LSD Tail 50mm Blow of Valve Auotmeter Boost Gauge Battery Relocation Kit in the trunk 4.30 Speedo Gear Suspension and Wheels: Megan Coilovers New Timken front and rear wheels bearings New Moog Inner & Outer tie rod ends New re-build steering rack and pinion (life time warranty) New Steering rack bushings New Steering Damper XM Solid Sub frame Bushings installed XM Solid Differential Bushings installed XM Rear Lower Pillow Ball installed XM Rear Upper Control Arm Bushings installed TSW Kaylami wheels, 18X9+20 Rear: Hankook tires – 215/45/18 (80% left) Front: Mayrun tires – 215/40/18 (70% Left) - EVERYTHING WORKS except the cruise control button, A/C blows ice cold, power windows & locks, climate control switches all work as they should. All lights work as they should. Bads: Matching paint needed and touchups around the exterior. Front passenger side fender needs a little bondo whenever it gets painted. FAST fun daily!!!!!!!!!!!!! Last edited by TexRex; 08-15-2014 at 11:01 AM..

08-10-2014, 02:44 PM	#3
StoneS14 Join Date: Dec 2011 Location: Ft. Carson, CO Age: 41 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Toyota Cressida i was interested in the toyota if want to pm me and we can talk about it

08-16-2014, 11:35 AM	#9
okinawa86 Join Date: Jan 2008 Location: Maryland Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	cressida Would you let it go for anything less than 6,000.00? I do not need the wheels. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-09-2014, 04:06 PM	#2
TexRex Leaky Injector Join Date: Jun 2008 Location: Houston Age: 45 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	bump numero uno

08-12-2014, 02:12 AM	#4
TexRex Leaky Injector Join Date: Jun 2008 Location: Houston Age: 45 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	Bump for a Tuesday morning

08-13-2014, 03:49 PM	#5
TexRex Leaky Injector Join Date: Jun 2008 Location: Houston Age: 45 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	Bump for a Wednesday afternoon

08-15-2014, 11:01 AM	#6
TexRex Leaky Injector Join Date: Jun 2008 Location: Houston Age: 45 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	bump for the weekend

08-15-2014, 12:02 PM	#7
rinaudo Join Date: Feb 2007 Location: louisiana Age: 34 Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	Why are you selling it? You just bought it.

09-02-2014, 11:48 PM	#11
CoalieG Leaky Injector Join Date: May 2013 Location: Mobile, Al Posts: 138 Trader Rating: (0) Feedback Score: 0 reviews	Still for sale?

09-10-2014, 07:14 AM	#12
Build4Boost Zilvia Member Join Date: Sep 2010 Location: Beatmore, MD Age: 37 Posts: 218 Trader Rating: (0) Feedback Score: 0 reviews	Where did you get the front end from. I have been searching for about a year and a half now

09-16-2014, 03:53 PM	#14
smolik769 Zilvia Member Join Date: Jul 2005 Location: Maryland, US Age: 37 Posts: 198 Trader Rating: (2) Feedback Score: 2 reviews	Elady on Ebay for the Front/Rear bumpers...

09-28-2014, 08:22 AM	#16
94_soarer Leaky Injector Join Date: Mar 2012 Location: Florida Posts: 94 Trader Rating: (0) Feedback Score: 0 reviews	I knew this car looked familiar, bump for a great car and done right from Grip Industries! They did my SC years ago and still running strong with no issues!!

10-01-2014, 03:27 PM	#17
TexRex Leaky Injector Join Date: Jun 2008 Location: Houston Age: 45 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	sorry guys close thread. I just now got out of hospital. Car was totaled on my way home from work a couple weeks ago as a kid under the influence hit me going 120+ on the freeway. Cars completely totaled horribly and obviously no longer available.