Putting power windows in a base model....help! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

King 240 · 09-23-2005, 11:47 PM

Ok, we are swapping parts from a 1998 SE 240 to a 1995 base model 240sx.

The base model doesn't have power locks, I was wondering if I swap the doors from the 98 with power locks over wil they work on the base model?

what all would be needed to make the doors have power locks in the base model?

projectRDM · 09-24-2005, 06:04 AM

You'll need both door harnesses and the entire dash harness, the SECU controls the door locks on power models, your base model doesn't have one.
Since the cars are 95 and 98 you'll need to use the correct gauge cluster also, or cut and rewire the plugs.

King 240 · 09-24-2005, 06:34 PM

so pretty much a bunch of BS for something little,lol.

SR240DET · 09-24-2005, 07:10 PM

Quote:

Originally Posted by King 240

Ok, we are swapping parts from a 1998 SE 240 to a 1995 base model 240sx.

The base model doesn't have power locks, I was wondering if I swap the doors from the 98 with power locks over wil they work on the base model?

what all would be needed to make the doors have power locks in the base model?

hahahhaha you made me laugh... there is alot more to it than that..... and you should dled the FSM so you can figure it out.... its really easy...

09-23-2005, 11:47 PM	#1
King 240 Banned from the Marketplace Join Date: Nov 2002 Location: College Station,TX Age: 40 Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	Putting power locks in a base model....help! Ok, we are swapping parts from a 1998 SE 240 to a 1995 base model 240sx. The base model doesn't have power locks, I was wondering if I swap the doors from the 98 with power locks over wil they work on the base model? what all would be needed to make the doors have power locks in the base model? Last edited by King 240; 09-24-2005 at 07:16 PM..

09-24-2005, 06:04 AM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You'll need both door harnesses and the entire dash harness, the SECU controls the door locks on power models, your base model doesn't have one. Since the cars are 95 and 98 you'll need to use the correct gauge cluster also, or cut and rewire the plugs. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-24-2005, 06:34 PM	#3
King 240 Banned from the Marketplace Join Date: Nov 2002 Location: College Station,TX Age: 40 Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	so pretty much a bunch of BS for something little,lol.