JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Kreukishot · 08-04-2006, 08:34 PM

Things are priced to sell...need to get rid of everything...price too high? offer me something decent.

I believe it's a Project Nissan 3" Downpipe for the SR/KA. It's used but in great condition. polish and it'll look new...70 picked up

Universal Used Apexi N1 Muffler with silencer. It's been sitting for awhile but it's in great condition. Just dusty. Very slight scratches on the
bottom. It was originally on a 94 accord F22B turbo...I have custom 3" piping for a 94-97 generation accord...taking offers..they go 200+ new for just the muffler?

Rear OEM S14 Kouki Bumper. Has some scratches on the passenger side. Other than that it's in very good shape. (It's a little dirty in the picture but it shines up beautifully)...know of a good body shop to repaint and it's brand new. It's still on my car. Won't pull it off till I have a for sure buyer.
Also have my rear trunk lid + OEM spoiler. Again in excellent condition. Looking for an OEM trunk lid without spoiler also in black to trade.

I have a brand new OEM JDM rear bumper for the S14 for sale as well. I have OEM style valences for this bumper to match. The valences are used and painted white. The valences are currently on ebay. Here are some pictures of the valences. The OEM JDM rear bumper is brand new in the box, just took it out to check it out.

SOLD BUMPER AND VALENCES

S14 Center Console in great shape. Some scuffs on the passenger side but nothing serious at all. 25+shipping..here's a picture of the scuffs..it's a little dusty and will clean before shipping

Brembo Slotted 300zx Brake rotors for the front (for the 30 mm application. NOT THE 26mm). They've been used for about 3000 miles on Axxis Ultimate Brake pads. They've got rust on the middle section (take a sander or soak in WD40?...it doesn't hinder braking at all) and there's a small dink on one of the faces of the rotor (won't hurt performance ). I just want to get rid of these cheap. EDIT: BTWI'm not sure if you'd need to resurface since I used R33 calipers on these rotors (the brake pad placement on the 300zx may wear the rotor out a bit differently than the R33 (meaning the R33 calipers may not have 'worn' down the part that 300zx calipers usually wear down. anyways, the rotor can't be worn down too much since i only used the rotors for less than 3000 miles)

Slightly used PPI 650C 6.5" Co-Axial Speakers. GREAT for highs...(better than the Infinity 63.5i. 63.5is did produce better mid/lows though. I have the box for these as well. Gotta dig it up in the garage. I bought them for about 100 when it was brand new. I'll take 60 OBO

Brand New Infinity Reference Components (6010cs) Tweeters Only They are exactly the 1011T Tweeters that Infinity sell alone. I got these off a friend who just used the 6.5 woofers and was too lazy to cut a hole to use the tweeters. I've got all the mounting pieces for the tweeters as well as the Passive Crossovers that came with the components. I have NOW ONLY ONE MORE SET brand new...only taken out of the plastic for test fitment...I actually may be too lazy to install as well...Taking offers for these...they're about 30+shipping on ebay

Random Honda Accord (I believe off a 94 LX) 14" 4 lug wheels. I have two of them...One has a brand new tire and the other has about 50%? I want to get rid of these cheap...

Custom Made 12" Single Sealed Enclosure/Box. Made with High Quality 3/4" MDF Ext Dim: 20"x13"x15". 1.66 Cubic foot. Carpeted Charcoal. (It is not nearly as white as you see in the picture...It matches the grey carpet that most 240s have) Originally had an Image Dynamics IDMAX in here but I made another box. Titebond+Silicone+DryWall screws...the box is SOLID...I DONT have the terminal but it is cut for this terminal: http://www.partsexpress.com/pe/showd...number=260-309
50 picked up takes it

Brand New premade Dual 12" Subwoofer Enclosure/Box. Made with high quality 5/8" MDF. Ext Dim: 13x13x28. Each Sub has it's own chamber. ~ 1 Cubic Foot per chamber.Includes Speaker Terminals. Carpeted Black...45 picked up takes it...

Slightly used Cobra 36ST CB Radios. I bought them when I was young and always wanted "walkie talkies"...anyways...you can use them to communicate at events? Go Initial D status and make sure the roads are clear in the canyons? Who knows...I just found them and want to get rid of them. I have the original boxes too and all that...40 bucks? I've no idea how much these go for...

S14 SE Front Calipers and Rotors. Taken off months ago replaced with R33 Brakes...decent offer takes them

Beginner's Amp+Sub Combo. Comes with a 10" Bazooka Tube with sub and a Koiiler XM-6666 Amp ( http://www.koiiler.com/amplifiers.html ). This thing unbelieveable hits well for it's size. Not sure what type of sub this is but it says "Power Punch"...SOLD

I'll update post if I have anythign else to sell. all prices OBO...located in Glendale/Irvine, CA...shipping is available at buyers expense...paypal add 3% of total...cash is recommended for local and paypal is recommended if shipping is needed.

Trades: Rear strut bar, lsd, uhh...whatever that's worth putting on my car? haha

Thanks for looking,
Chris
818-726-0998

DRFT · 08-04-2006, 08:49 PM

60 shipped for the speakers?

j2i5 · 08-04-2006, 10:27 PM

30shipped for infiniti component tweeters

LovingMy240sx · 08-04-2006, 10:47 PM

$50 shipped for the downpipe

***S14DB*** · 08-04-2006, 10:50 PM

Let me know if you want to sell the JDM valences separately.

Kreukishot · 08-07-2006, 10:57 AM

bump...140 picked up takes the valences. replied to all who posted

Neurowave · 08-09-2006, 01:38 PM

Do you have more pics of the trunk spoiler?
I might be intrested in trading the trunk of my black 95.

qt_240 · 08-09-2006, 02:26 PM

$40 SHipped for the rotors?? PM me back

Professional · 08-09-2006, 02:49 PM

ill take the jdm rear bumper and valences! ill be in irvine this weekend!

Kreukishot · 08-09-2006, 03:14 PM

neurowave: will take pics asap. i won't need your center tail light though since yours is the zenki...(unless you changed). i'm pretty sure other than that the s14 rear trunk lid is the same.

gt240: hmmm...shipping itself is going to be about 30ish. i'd prefer local since it may not be worth it to ship. i'll get back to you.

professional: sent a pm back at you...let me know

Wei240 · 08-09-2006, 04:34 PM

wasn't sure if it's posted, but
300zx = 30mm or 26mm?

Kreukishot · 08-09-2006, 06:30 PM

300zx rotors are 30mm...sorry. i'll edit...and some new information about the rotors...

99maxgtr · 08-09-2006, 07:45 PM

price for just the jdm rear bumper and more pics of it?

Kreukishot · 08-09-2006, 09:40 PM

99max: it's brand new...soo..unless you've never seen a rear jdm oem bumper before i'm not sure what type of pictures you want. looks like this without the valences on a painted car: http://img.photobucket.com/albums/v1...rearbumper.jpg

xtreme_s14 · 08-10-2006, 04:19 AM

just inquiring about your rear valance.. asking price? lowest price you'll take picked up? trade for S14 kouki sideskirts? PM me dude when you get a chance! i would like to try to pick these up this week..

Kreukishot · 08-12-2006, 12:44 AM

alright guys, the rear bumper and valences are sold, one set of tweeters is sold, the sub and amp are sold. everything else is still up for grabs

Kreukishot · 08-17-2006, 10:10 AM

bump...i will not be available friday-sunday (going camping). but you could call me and i'll answer your questions...

Kreukishot · 08-28-2006, 09:34 PM

bump......still got stuff to get rid of...

ticklemeermuel · 09-03-2006, 06:46 PM

$50 picked up for the downpipe. im local as well lemme know what you think

LA_phantom_240 · 09-03-2006, 07:23 PM

ill give ya 25 for the tweets?

LovingMy240sx · 09-03-2006, 09:46 PM

$60 shipped for the downpipe.

Kreukishot · 06-04-2007, 12:17 PM

too busy with the school year to do anything with my car...time to get these parts out of my parents house...so yea...as the subtitle says...offer me what you're willing to pay and if it's acceptable, it's yours...in the Glendale/LA area or OC (I live in Foothill Ranch).

Snoopy · 06-04-2007, 12:23 PM

70$ shipped for the rotors?

08-04-2006, 08:34 PM	#1
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Things are priced to sell...need to get rid of everything...price too high? offer me something decent. I believe it's a Project Nissan 3" Downpipe for the SR/KA. It's used but in great condition. polish and it'll look new...70 picked up Universal Used Apexi N1 Muffler with silencer. It's been sitting for awhile but it's in great condition. Just dusty. Very slight scratches on the bottom. It was originally on a 94 accord F22B turbo...I have custom 3" piping for a 94-97 generation accord...taking offers..they go 200+ new for just the muffler? Rear OEM S14 Kouki Bumper. Has some scratches on the passenger side. Other than that it's in very good shape. (It's a little dirty in the picture but it shines up beautifully)...know of a good body shop to repaint and it's brand new. It's still on my car. Won't pull it off till I have a for sure buyer. Also have my rear trunk lid + OEM spoiler. Again in excellent condition. Looking for an OEM trunk lid without spoiler also in black to trade. I have a brand new OEM JDM rear bumper for the S14 for sale as well. I have OEM style valences for this bumper to match. The valences are used and painted white. The valences are currently on ebay. Here are some pictures of the valences. The OEM JDM rear bumper is brand new in the box, just took it out to check it out. SOLD BUMPER AND VALENCES S14 Center Console in great shape. Some scuffs on the passenger side but nothing serious at all. 25+shipping..here's a picture of the scuffs..it's a little dusty and will clean before shipping Brembo Slotted 300zx Brake rotors for the front (for the 30 mm application. NOT THE 26mm). They've been used for about 3000 miles on Axxis Ultimate Brake pads. They've got rust on the middle section (take a sander or soak in WD40?...it doesn't hinder braking at all) and there's a small dink on one of the faces of the rotor (won't hurt performance ). I just want to get rid of these cheap. EDIT: BTWI'm not sure if you'd need to resurface since I used R33 calipers on these rotors (the brake pad placement on the 300zx may wear the rotor out a bit differently than the R33 (meaning the R33 calipers may not have 'worn' down the part that 300zx calipers usually wear down. anyways, the rotor can't be worn down too much since i only used the rotors for less than 3000 miles) Slightly used PPI 650C 6.5" Co-Axial Speakers. GREAT for highs...(better than the Infinity 63.5i. 63.5is did produce better mid/lows though. I have the box for these as well. Gotta dig it up in the garage. I bought them for about 100 when it was brand new. I'll take 60 OBO Brand New Infinity Reference Components (6010cs) Tweeters Only They are exactly the 1011T Tweeters that Infinity sell alone. I got these off a friend who just used the 6.5 woofers and was too lazy to cut a hole to use the tweeters. I've got all the mounting pieces for the tweeters as well as the Passive Crossovers that came with the components. I have NOW ONLY ONE MORE SET brand new...only taken out of the plastic for test fitment...I actually may be too lazy to install as well...Taking offers for these...they're about 30+shipping on ebay Random Honda Accord (I believe off a 94 LX) 14" 4 lug wheels. I have two of them...One has a brand new tire and the other has about 50%? I want to get rid of these cheap... Custom Made 12" Single Sealed Enclosure/Box. Made with High Quality 3/4" MDF Ext Dim: 20"x13"x15". 1.66 Cubic foot. Carpeted Charcoal. (It is not nearly as white as you see in the picture...It matches the grey carpet that most 240s have) Originally had an Image Dynamics IDMAX in here but I made another box. Titebond+Silicone+DryWall screws...the box is SOLID...I DONT have the terminal but it is cut for this terminal: http://www.partsexpress.com/pe/showd...number=260-309 50 picked up takes it Brand New premade Dual 12" Subwoofer Enclosure/Box. Made with high quality 5/8" MDF. Ext Dim: 13x13x28. Each Sub has it's own chamber. ~ 1 Cubic Foot per chamber.Includes Speaker Terminals. Carpeted Black...45 picked up takes it... Slightly used Cobra 36ST CB Radios. I bought them when I was young and always wanted "walkie talkies"...anyways...you can use them to communicate at events? Go Initial D status and make sure the roads are clear in the canyons? Who knows...I just found them and want to get rid of them. I have the original boxes too and all that...40 bucks? I've no idea how much these go for... S14 SE Front Calipers and Rotors. Taken off months ago replaced with R33 Brakes...decent offer takes them Beginner's Amp+Sub Combo. Comes with a 10" Bazooka Tube with sub and a Koiiler XM-6666 Amp ( http://www.koiiler.com/amplifiers.html ). This thing unbelieveable hits well for it's size. Not sure what type of sub this is but it says "Power Punch"...SOLD I'll update post if I have anythign else to sell. all prices OBO...located in Glendale/Irvine, CA...shipping is available at buyers expense...paypal add 3% of total...cash is recommended for local and paypal is recommended if shipping is needed. Trades: Rear strut bar, lsd, uhh...whatever that's worth putting on my car? haha Thanks for looking, Chris 818-726-0998 __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc) Last edited by Kreukishot; 08-17-2006 at 10:05 AM..

08-04-2006, 10:50 PM	#5
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	Let me know if you want to sell the JDM valences separately. __________________ Comments should be taken as Opinions not as Statements of Fact

08-07-2006, 10:57 AM	#6
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	bump...140 picked up takes the valences. replied to all who posted __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

08-09-2006, 03:14 PM	#10
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	neurowave: will take pics asap. i won't need your center tail light though since yours is the zenki...(unless you changed). i'm pretty sure other than that the s14 rear trunk lid is the same. gt240: hmmm...shipping itself is going to be about 30ish. i'd prefer local since it may not be worth it to ship. i'll get back to you. professional: sent a pm back at you...let me know __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

08-09-2006, 06:30 PM	#12
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	300zx rotors are 30mm...sorry. i'll edit...and some new information about the rotors... __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

08-04-2006, 08:49 PM	#2
DRFT Post Whore! Join Date: Apr 2003 Location: Pow Pow Age: 41 Posts: 3,744 Trader Rating: (0) Feedback Score: 0 reviews	60 shipped for the speakers?

08-04-2006, 10:27 PM	#3
j2i5 Join Date: Jul 2006 Location: Philadelphia and Norfolk Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	30shipped for infiniti component tweeters

08-04-2006, 10:47 PM	#4
LovingMy240sx Zilvia Member Join Date: Jun 2006 Location: pa Posts: 194 Trader Rating: (0) Feedback Score: 0 reviews	$50 shipped for the downpipe

08-09-2006, 01:38 PM	#7
Neurowave Join Date: Jul 2006 Location: Lil Rhody Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	Do you have more pics of the trunk spoiler? I might be intrested in trading the trunk of my black 95.

08-09-2006, 02:26 PM	#8
qt_240 Nissanaholic! Join Date: Jan 2005 Location: CHI Posts: 2,122 Trader Rating: (3) Feedback Score: 3 reviews	$40 SHipped for the rotors?? PM me back

08-09-2006, 02:49 PM	#9
Professional Leaky Injector Join Date: Apr 2006 Location: SF Bay Area Posts: 109 Trader Rating: (0) Feedback Score: 0 reviews	ill take the jdm rear bumper and valences! ill be in irvine this weekend!

08-09-2006, 04:34 PM	#11
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	wasn't sure if it's posted, but 300zx = 30mm or 26mm?

08-09-2006, 07:45 PM	#13
99maxgtr Nissanaholic! Join Date: Nov 2005 Location: dirty jersey Posts: 1,705 Trader Rating: (22) Feedback Score: 22 reviews	price for just the jdm rear bumper and more pics of it?

08-09-2006, 09:40 PM	#14
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	99max: it's brand new...soo..unless you've never seen a rear jdm oem bumper before i'm not sure what type of pictures you want. looks like this without the valences on a painted car: http://img.photobucket.com/albums/v1...rearbumper.jpg __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

08-10-2006, 04:19 AM	#15
xtreme_s14 Zilvia Addict Join Date: Jan 2005 Location: SoCal Posts: 708 Trader Rating: (4) Feedback Score: 4 reviews	just inquiring about your rear valance.. asking price? lowest price you'll take picked up? trade for S14 kouki sideskirts? PM me dude when you get a chance! i would like to try to pick these up this week.. __________________

08-12-2006, 12:44 AM	#16
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	alright guys, the rear bumper and valences are sold, one set of tweeters is sold, the sub and amp are sold. everything else is still up for grabs __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

08-17-2006, 10:10 AM	#17
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	bump...i will not be available friday-sunday (going camping). but you could call me and i'll answer your questions... __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

08-28-2006, 09:34 PM	#18
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	bump......still got stuff to get rid of... __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

09-03-2006, 06:46 PM	#19
ticklemeermuel Zilvia Junkie Join Date: Sep 2004 Location: so cal Age: 42 Posts: 447 Trader Rating: (15) Feedback Score: 15 reviews	$50 picked up for the downpipe. im local as well lemme know what you think __________________ -Erm [email protected] AIM: ticklemeermuel

09-03-2006, 09:46 PM	#21
LovingMy240sx Zilvia Member Join Date: Jun 2006 Location: pa Posts: 194 Trader Rating: (0) Feedback Score: 0 reviews	$60 shipped for the downpipe.

06-04-2007, 12:17 PM	#22
Kreukishot Zilvia Member Join Date: Jul 2004 Location: Glendale/Irvine/La Jolla Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	too busy with the school year to do anything with my car...time to get these parts out of my parents house...so yea...as the subtitle says...offer me what you're willing to pay and if it's acceptable, it's yours...in the Glendale/LA area or OC (I live in Foothill Ranch). __________________ JDM.USDM R-Bumper.Valences.Brakes.Downpipe.Car Audio.C Console.Muffler.Trunk Lid.MORE Random Car Parts (Scion, RSX, Integra, WRX, Accord, Celica, etc)

06-04-2007, 12:23 PM	#23
Snoopy Zilvia Junkie Join Date: Mar 2007 Location: Fredericksburg, Va Age: 36 Posts: 369 Trader Rating: (1) Feedback Score: 1 reviews	70$ shipped for the rotors? __________________ 88 Rx7 Convertible - Low, Slow, Nice 89 GTUs - Track slut / Missile