start up problem in my sr20 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

fico · 08-20-2006, 09:12 PM

i dont know if u can call it a start up problem as in i havent gottent he car started only turned over, but anyway i cranked it a few times over then i heard dripping and look under the car and see oil dripping so it hought it was the oil pan gasket but it turns out not to be that but oil dripping from higher up and i dont know where its comming from...its on the side the AC use to be is there an oil line running to that or somehting?

tiresmokes13 · 08-21-2006, 01:03 AM

Most likely your turbo oil line feed.
You can find it on your turbo side on the side of the block. look around youll see it.

fico · 08-21-2006, 01:31 PM

yeah i looked and it did kinda look like it was comming up from closerby the turbo line to the block so ill crank it down and see

punxva · 08-21-2006, 02:22 PM

did u put any copper washers on the banjo bolt? on the top and bottom? if not then thats probably why its leaking check that first

fico · 08-21-2006, 03:00 PM

so i figured out what was wrong....yeah im a noob before u say anything....so i went to tighten the banjo thing and it wasnt even hand tight lol so yeah thats one mystery solved lol no i need to know how to wire a z32 ignitor into my sr harness

08-20-2006, 09:12 PM	#1
fico Leaky Injector Join Date: Jul 2006 Location: Akron Ohio Age: 37 Posts: 119 Trader Rating: (0) Feedback Score: 0 reviews	start up problem in my sr20 i dont know if u can call it a start up problem as in i havent gottent he car started only turned over, but anyway i cranked it a few times over then i heard dripping and look under the car and see oil dripping so it hought it was the oil pan gasket but it turns out not to be that but oil dripping from higher up and i dont know where its comming from...its on the side the AC use to be is there an oil line running to that or somehting? __________________ http://www.cardomain.com/ride/2414198 www.myspace.com/fico1 I't's my car. Nobody said you had to like it.

08-21-2006, 01:31 PM	#3
fico Leaky Injector Join Date: Jul 2006 Location: Akron Ohio Age: 37 Posts: 119 Trader Rating: (0) Feedback Score: 0 reviews	yeah i looked and it did kinda look like it was comming up from closerby the turbo line to the block so ill crank it down and see __________________ http://www.cardomain.com/ride/2414198 www.myspace.com/fico1 I't's my car. Nobody said you had to like it.

08-21-2006, 03:00 PM	#5
fico Leaky Injector Join Date: Jul 2006 Location: Akron Ohio Age: 37 Posts: 119 Trader Rating: (0) Feedback Score: 0 reviews	so i figured out what was wrong....yeah im a noob before u say anything....so i went to tighten the banjo thing and it wasnt even hand tight lol so yeah thats one mystery solved lol no i need to know how to wire a z32 ignitor into my sr harness __________________ http://www.cardomain.com/ride/2414198 www.myspace.com/fico1 I't's my car. Nobody said you had to like it.

08-21-2006, 01:03 AM	#2
tiresmokes13 Banned from the Marketplace Join Date: Jun 2006 Location: Socal Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	Most likely your turbo oil line feed. You can find it on your turbo side on the side of the block. look around youll see it.