sr heads - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

fico · 09-10-2006, 01:12 AM

i was reading in the sr faq about the different heads of the sr's and wondered...are they like hoda b-series? and u can just swap them all around? because i have a s13 red top and from the sounds of it a gti-r head would be a nice add on. how do able is this? what do i have to do and can it be done?

CKAMC · 09-10-2006, 01:19 AM

from what I know with SR's and in particularly with the fwd models equiped with the roller rocker motor you can place on the VE *VVL motor* head to get that "vtec" like action.

with the RWD applications the only things I have seen is changing the throttle body as the turbo models are equipped with smaller throttle bodies compared to the NA and GTiR fwd model.

There is also the intake manifold provided by companies like tomei and jun and greddy... other than that there is the s14/s15 vtc heads.

Does that answer your question?

fico · 09-10-2006, 02:05 AM

yeah i dont like the answer but what are you gona do lol it be sweet if they were like honda b blocks because right now my friend is building a b20 block (2.0 lt.) with a crazy head it will end up at a 2.3lt engine with idk how much hp close to 230 N/A and the block will be sleves head ported and polished before he drops it into a little del sol so running 20lb at the track...well yeah lets just say daaamn

datboibrad · 09-10-2006, 10:34 AM

Quote:

Originally Posted by fico

yeah i dont like the answer but what are you gona do lol it be sweet if they were like honda b blocks because right now my friend is building a b20 block (2.0 lt.) with a crazy head it will end up at a 2.3lt engine with idk how much hp close to 230 N/A and the block will be sleves head ported and polished before he drops it into a little del sol so running 20lb at the track...well yeah lets just say daaamn

what bore and rod length. just asking before i call bs on a 2.3. hopefully he is running 86mm bore with a 101mm crank and a decked head. if not then bullshit. also ive seen stock bore and stroke motors with built head and cams make 230 so i would hope he was clearing 300whp with a motor that big.

fico · 09-10-2006, 06:48 PM

havent you heard of Frankenstien? its a B20 Block with a B18 head bored out...b yeah i know fwd is a waste thats why i trashed my ideas of a making my SI fast and went with a 240......ok so tell me this...my friend has a 99 civic SI stock motor has 160hp he thinks with the turbo kit he is putting on soon and running 8lb's he is magicly going to have 270whp....so telll me this...how delusional is that??

sub_version · 09-10-2006, 10:05 AM

"daaamn" what a waste of $. FWD < *

McRussellPants · 09-10-2006, 07:19 PM

not that it matters since no one here is gonna do it since VE heads are nearly impossible to find.

Yes, the VE and FWD DE heads will go on to the RWD Block with the same effort as putting a VTEC head on a non VTEC honda block.
oil lines, plugging certain galleys, ect.

getting manifolds that fit and other such nonsense is harder though.

SR20VE in S14.
http://www.eagle-r.jp/sr20ve.html
note the one off manis.
also not the lack of CAS and Distributer (not that triggerwheels are rocket science or anything)

SR20forum.com has a couple threads about it

WilloW · 09-10-2006, 07:24 PM

If it could be done like this

and this

then I don't see why you can't do it to the GTiR head, the only mojor problems I see is that fat distributor (up against the firewall) and the intake manifold (pointing at the firewall), and how deep your pocket is.

Edit: My bad, I didn't see McRussellPants' link in his post.

09-10-2006, 01:12 AM	#1
fico Leaky Injector Join Date: Jul 2006 Location: Akron Ohio Age: 37 Posts: 119 Trader Rating: (0) Feedback Score: 0 reviews	sr heads i was reading in the sr faq about the different heads of the sr's and wondered...are they like hoda b-series? and u can just swap them all around? because i have a s13 red top and from the sounds of it a gti-r head would be a nice add on. how do able is this? what do i have to do and can it be done? __________________ http://www.cardomain.com/ride/2414198 www.myspace.com/fico1 I't's my car. Nobody said you had to like it.

09-10-2006, 01:19 AM	#2
CKAMC Post Whore! Join Date: Mar 2004 Location: Desert Age: 38 Posts: 4,804 Trader Rating: (0) Feedback Score: 0 reviews	from what I know with SR's and in particularly with the fwd models equiped with the roller rocker motor you can place on the VE VVL motor head to get that "vtec" like action. with the RWD applications the only things I have seen is changing the throttle body as the turbo models are equipped with smaller throttle bodies compared to the NA and GTiR fwd model. There is also the intake manifold provided by companies like tomei and jun and greddy... other than that there is the s14/s15 vtc heads. Does that answer your question? __________________

09-10-2006, 02:05 AM	#3
fico Leaky Injector Join Date: Jul 2006 Location: Akron Ohio Age: 37 Posts: 119 Trader Rating: (0) Feedback Score: 0 reviews	yeah i dont like the answer but what are you gona do lol it be sweet if they were like honda b blocks because right now my friend is building a b20 block (2.0 lt.) with a crazy head it will end up at a 2.3lt engine with idk how much hp close to 230 N/A and the block will be sleves head ported and polished before he drops it into a little del sol so running 20lb at the track...well yeah lets just say daaamn __________________ http://www.cardomain.com/ride/2414198 www.myspace.com/fico1 I't's my car. Nobody said you had to like it.

09-10-2006, 06:48 PM	#5
fico Leaky Injector Join Date: Jul 2006 Location: Akron Ohio Age: 37 Posts: 119 Trader Rating: (0) Feedback Score: 0 reviews	havent you heard of Frankenstien? its a B20 Block with a B18 head bored out...b yeah i know fwd is a waste thats why i trashed my ideas of a making my SI fast and went with a 240......ok so tell me this...my friend has a 99 civic SI stock motor has 160hp he thinks with the turbo kit he is putting on soon and running 8lb's he is magicly going to have 270whp....so telll me this...how delusional is that?? __________________ http://www.cardomain.com/ride/2414198 www.myspace.com/fico1 I't's my car. Nobody said you had to like it.

09-10-2006, 07:24 PM	#8
WilloW Zilvia FREAK! Join Date: Aug 2003 Location: * ** Posts: 1,529 Trader Rating: (0) Feedback Score: 0 reviews	If it could be done like this and this then I don't see why you can't do it to the GTiR head, the only mojor problems I see is that fat distributor (up against the firewall) and the intake manifold (pointing at the firewall), and how deep your pocket is. Edit: My bad, I didn't see McRussellPants' link in his post. __________________

09-10-2006, 10:05 AM	#6
sub_version Join Date: Feb 2005 Location: USA Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	"daaamn" what a waste of $. FWD < *

09-10-2006, 07:19 PM	#7
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	not that it matters since no one here is gonna do it since VE heads are nearly impossible to find. Yes, the VE and FWD DE heads will go on to the RWD Block with the same effort as putting a VTEC head on a non VTEC honda block. oil lines, plugging certain galleys, ect. getting manifolds that fit and other such nonsense is harder though. SR20VE in S14. http://www.eagle-r.jp/sr20ve.html note the one off manis. also not the lack of CAS and Distributer (not that triggerwheels are rocket science or anything) SR20forum.com has a couple threads about it