gauge temp sensor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

soyer · 05-17-2007, 02:50 PM

recently bougth a s14 with redtop and the temp gauge goes to half way abotu 10sec after i startt he car and read max while driving but no over heating problems/ i tried changing the temp sensor with a new one made for doch ka but same problem anyone know what wrong?

jrmiller84 · 05-17-2007, 02:52 PM

Probably the gauge or a wiring problem. Go aftermarket.

soyer · 05-18-2007, 04:18 PM

no other way??

e1_griego · 05-18-2007, 04:21 PM

Check/add grounds, maybe? Usually bad grounds will make the needle bounce around, though.

Alex

*fliprayzin240sx* · 05-19-2007, 06:52 AM

You need the S14 water temp sensor off your KA. The SR water temp gauge sensor has a different voltage signal. Go to the dealer and get it for whatever year your chassis is and swap the SR one out.

Just incase your not sure which sensor it is, look a bit above the thermostat area. Look at your wiring by the FPR and follow it, should go to 2 sensors. Swap the one on the right side.

soyer · 05-24-2007, 07:15 PM

thanks!!!!!!!!!! will try it out

05-17-2007, 02:50 PM	#1
soyer Join Date: Dec 2005 Location: hawaii Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	gauge temp sensor recently bougth a s14 with redtop and the temp gauge goes to half way abotu 10sec after i startt he car and read max while driving but no over heating problems/ i tried changing the temp sensor with a new one made for doch ka but same problem anyone know what wrong?

05-17-2007, 02:52 PM	#2
jrmiller84 Zilvia FREAK! Join Date: Jul 2006 Location: Gainesville, FL Age: 40 Posts: 1,021 Trader Rating: (2) Rides Gallery: jrmiller84 Feedback Score: 2 reviews	Probably the gauge or a wiring problem. Go aftermarket. __________________ BitDestroyer.com

05-19-2007, 06:52 AM	#5
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	You need the S14 water temp sensor off your KA. The SR water temp gauge sensor has a different voltage signal. Go to the dealer and get it for whatever year your chassis is and swap the SR one out. Just incase your not sure which sensor it is, look a bit above the thermostat area. Look at your wiring by the FPR and follow it, should go to 2 sensors. Swap the one on the right side. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

05-18-2007, 04:18 PM	#3
soyer Join Date: Dec 2005 Location: hawaii Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	no other way??

05-18-2007, 04:21 PM	#4
e1_griego Post Whore! Join Date: Sep 2004 Location: Independence, Ore. Age: 40 Posts: 2,722 Trader Rating: (24) Feedback Score: 24 reviews	Check/add grounds, maybe? Usually bad grounds will make the needle bounce around, though. Alex

05-24-2007, 07:15 PM	#6
soyer Join Date: Dec 2005 Location: hawaii Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	thanks!!!!!!!!!! will try it out