is there a way to change camber - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drifting240sx · 08-29-2002, 12:38 PM

i have a s13 and is wondering if there is a way. my left wheel is negitive cambered and my right is positive camber. it got cambered when i got in an accident. so is there a way or do i need to get some after market plates?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>

drift into a curb · 08-29-2002, 05:35 PM

I think stock adjustments allow +/-1 degree, correct me if I'm wrong. Did you get an alignment done? If you got the alignment, they should be able to adjust it as much as they can unless you bent something..

drifting240sx · 08-30-2002, 01:39 AM

well i went to the get it aligned(sp?) today but they didnt want to do it cuz i bent the cross member. like where the lower control arm connects to it. also my sway bar isnt connected to the LCA. im thinking that also might be the problem for being camber and pulling to the right

08-29-2002, 12:38 PM	#1
drifting240sx Zilvia Junkie Join Date: Oct 2001 Location: salinas ca Age: 41 Posts: 362 Trader Rating: (0) Feedback Score: 0 reviews	i have a s13 and is wondering if there is a way. my left wheel is negitive cambered and my right is positive camber. it got cambered when i got in an accident. so is there a way or do i need to get some after market plates?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'> __________________ PROJECT SIL-80

08-29-2002, 05:35 PM	#2
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	I think stock adjustments allow +/-1 degree, correct me if I'm wrong. Did you get an alignment done? If you got the alignment, they should be able to adjust it as much as they can unless you bent something.. __________________ Go big or go home!

08-30-2002, 01:39 AM	#3
drifting240sx Zilvia Junkie Join Date: Oct 2001 Location: salinas ca Age: 41 Posts: 362 Trader Rating: (0) Feedback Score: 0 reviews	well i went to the get it aligned(sp?) today but they didnt want to do it cuz i bent the cross member. like where the lower control arm connects to it. also my sway bar isnt connected to the LCA. im thinking that also might be the problem for being camber and pulling to the right __________________ PROJECT SIL-80