s14 kouki bumper lights... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mrjeffr0 · 09-27-2007, 04:05 PM

ive searched and found nothing. but then again i suck at searching.

i just put on my japo front bumper with the bumper lights but i ran into a problem.

i dont know how the heck to wire up the turnsignals. i used the usdm sidemarker plug to light them up but my turn signals will not work. when i turn on my lights i think my turnsignals are constantly lit up. but they will not blink.

and this is for an 97 s14.

please help.

MavericStephenc · 09-27-2007, 04:37 PM

first: you wouldn't use the side marker bulb
second:the reason they don't blink is because they are the side markers and they are not supposed to blink.

i don't think there is a difference between bulbs that are used on the jdm signals so they should plug right in.
if indeed you do need to wire them there is a positive negative and a ground
wire. get a volt meter and check then wire in. simple

and a simple search of "jdm turn signal" revealed this on the first page 4-5 topics down
http://www.zilvia.net/f/showthread.p...dm+turn+signal

mrjeffr0 · 09-27-2007, 08:54 PM

damn thanks that is exactly what i was looking for.

RUTH'LESSDET · 09-27-2007, 09:15 PM

just use this it works fine

https://www.mynismo.com/products/?id=5306

$12.10

09-27-2007, 04:05 PM	#1
mrjeffr0 Join Date: Mar 2005 Location: washington Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	s14 kouki bumper lights... ive searched and found nothing. but then again i suck at searching. i just put on my japo front bumper with the bumper lights but i ran into a problem. i dont know how the heck to wire up the turnsignals. i used the usdm sidemarker plug to light them up but my turn signals will not work. when i turn on my lights i think my turnsignals are constantly lit up. but they will not blink. and this is for an 97 s14. please help.

09-27-2007, 04:37 PM	#2
MavericStephenc Zilvia Addict Join Date: Aug 2006 Location: salem mass. Age: 37 Posts: 830 Trader Rating: (0) Feedback Score: 0 reviews	first: you wouldn't use the side marker bulb second:the reason they don't blink is because they are the side markers and they are not supposed to blink. i don't think there is a difference between bulbs that are used on the jdm signals so they should plug right in. if indeed you do need to wire them there is a positive negative and a ground wire. get a volt meter and check then wire in. simple and a simple search of "jdm turn signal" revealed this on the first page 4-5 topics down http://www.zilvia.net/f/showthread.p...dm+turn+signal __________________ That kind of attitude is SHIT. People with that kind of complacent outlook on law and government are the bane of this country's existence. -Thesquidd Boycott Berkeley and code pink

09-27-2007, 09:15 PM	#4
RUTH'LESSDET Zilvia Addict Join Date: Jan 2003 Location: NYC Age: 45 Posts: 905 Trader Rating: (1) Feedback Score: 1 reviews	just use this it works fine https://www.mynismo.com/products/?id=5306 $12.10 __________________ 91 Sil80-Sold, LS2 Powered 1997 240sx-Traded, 2005 350z-Sold, Whats next?

09-27-2007, 08:54 PM	#3
mrjeffr0 Join Date: Mar 2005 Location: washington Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	damn thanks that is exactly what i was looking for.