another dash light problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

posdriftin · 10-28-2007, 09:58 AM

i have looked and looked and still have no answer to my problem
the dash lights don't come on,,,, it has one bulb that comes on when key to on but when i turn lights on it goes off, i have replaced my dimmer and little white box thing with working ones and still nothing? it started after i took the cluster out to have the hud fixed, i touched it against the ignition wires on accident. no blown fuses in kick panel.. the dummy lights also still work..any ideas??

racepar1 · 10-28-2007, 06:26 PM

You have a short in your illumination circuit and it burns out the time control unit (little white box thing). I had the same problem recently. When I did my silvia front conversion I wired up the fog lights on my dual projectors to the factory fog light wiring that all 240's have, which is fine. Unfortuanetly I tried to use the japanese fog light switch and it was putting power where it wasn't supposed to in the illumination circuit. Long story short, it burned out both of the time control units that I have before I figured it out. Take out your time control unit and remove the white cover and look for burned spots on the circuitboard.

posdriftin · 10-28-2007, 08:21 PM

Quote:

Originally Posted by racepar1

You have a short in your illumination circuit and it burns out the time control unit (little white box thing). I had the same problem recently. When I did my silvia front conversion I wired up the fog lights on my dual projectors to the factory fog light wiring that all 240's have, which is fine. Unfortuanetly I tried to use the japanese fog light switch and it was putting power where it wasn't supposed to in the illumination circuit. Long story short, it burned out both of the time control units that I have before I figured it out. Take out your time control unit and remove the white cover and look for burned spots on the circuitboard.

both white boxes i tested were not burned.. and both work in my buddies car allong with the three dimmer all work in his car... i am stuck and my radio keeps reseting.. like the ignition wire to it has popped fuse.......wait let me go check that again....

posdriftin · 10-28-2007, 08:33 PM

yup still broke... anymore ideas?

racepar1 · 10-28-2007, 10:58 PM

Get a wiring diagram, without one you are just chasing your tail and guessing. If the time control and fuses are good then it might be in your cluster. Pull your dimmer switch out there should be 5 wires. Black(ground) blue and pruple(go to the time control module) and 2 other wires orange or red (I don't exactly remember the colors, but those are the illumination wires). There should only be power on one of the red or orange wires, if there is power on both then refer to my first post. If there is only power on one of those wires then it is probably your cluster. What was "repaired" in your cluster exactly?

posdriftin · 10-29-2007, 08:08 AM

the capacitor for the hud..

koukimonster139 · 10-28-2007, 06:50 PM

^sweet post

jajajjajajaaa

drift freaq · 11-01-2007, 10:39 PM

Another thing to check is the turn signal switch, its integral to the whole turn signal arm and is tied into the whole lighting circuit for the car. I had that problem back in the day and it was causing dash lights to not work and brake lights to not light up. I switched it out and boom everything was fixed.

Tearlessj · 11-01-2007, 10:44 PM

My HUD cluster lights didnt light up, HUD didnt show up. The only things that worked were the LEDs and tach. But the tach did not light up. I replaced it with a analog cluster and everything lights up and works properly. So it could be just your cluster.

posdriftin · 11-02-2007, 09:05 AM

i have tried two diff clusters.
on the dimmer the black has ground i don't think the other red wire has power. the cluster is getting power because if i ground the other side of the light they all light up.
when the key is on on behind tach is on and when i turn lights on it goes off.

10-28-2007, 09:58 AM	#1
posdriftin Zilvia Addict Join Date: Apr 2007 Location: so cal...north ..sd... Posts: 832 Trader Rating: (7) Feedback Score: 7 reviews	another dash light problem i have looked and looked and still have no answer to my problem the dash lights don't come on,,,, it has one bulb that comes on when key to on but when i turn lights on it goes off, i have replaced my dimmer and little white box thing with working ones and still nothing? it started after i took the cluster out to have the hud fixed, i touched it against the ignition wires on accident. no blown fuses in kick panel.. the dummy lights also still work..any ideas??

10-28-2007, 06:50 PM	#7
koukimonster139 Zilvia FREAK! Join Date: Jan 2006 Location: Birmingham, AL Age: 38 Posts: 1,379 Trader Rating: (0) Feedback Score: 0 reviews	^sweet post jajajjajajaaa __________________ ho ha ho chi chi

11-01-2007, 10:39 PM	#8
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	Another thing to check is the turn signal switch, its integral to the whole turn signal arm and is tied into the whole lighting circuit for the car. I had that problem back in the day and it was causing dash lights to not work and brake lights to not light up. I switched it out and boom everything was fixed. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

11-01-2007, 10:44 PM	#9
Tearlessj Nissanaholic! Join Date: Feb 2007 Location: Memphis Age: 33 Posts: 1,907 Trader Rating: (6) Feedback Score: 6 reviews	My HUD cluster lights didnt light up, HUD didnt show up. The only things that worked were the LEDs and tach. But the tach did not light up. I replaced it with a analog cluster and everything lights up and works properly. So it could be just your cluster. __________________ Nagasaki Motors Friends help you move. Real friends help you move bodies.

10-28-2007, 06:26 PM	#2
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	You have a short in your illumination circuit and it burns out the time control unit (little white box thing). I had the same problem recently. When I did my silvia front conversion I wired up the fog lights on my dual projectors to the factory fog light wiring that all 240's have, which is fine. Unfortuanetly I tried to use the japanese fog light switch and it was putting power where it wasn't supposed to in the illumination circuit. Long story short, it burned out both of the time control units that I have before I figured it out. Take out your time control unit and remove the white cover and look for burned spots on the circuitboard.

10-28-2007, 08:33 PM	#4
posdriftin Zilvia Addict Join Date: Apr 2007 Location: so cal...north ..sd... Posts: 832 Trader Rating: (7) Feedback Score: 7 reviews	yup still broke... anymore ideas?

10-28-2007, 10:58 PM	#5
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Get a wiring diagram, without one you are just chasing your tail and guessing. If the time control and fuses are good then it might be in your cluster. Pull your dimmer switch out there should be 5 wires. Black(ground) blue and pruple(go to the time control module) and 2 other wires orange or red (I don't exactly remember the colors, but those are the illumination wires). There should only be power on one of the red or orange wires, if there is power on both then refer to my first post. If there is only power on one of those wires then it is probably your cluster. What was "repaired" in your cluster exactly?

10-29-2007, 08:08 AM	#6
posdriftin Zilvia Addict Join Date: Apr 2007 Location: so cal...north ..sd... Posts: 832 Trader Rating: (7) Feedback Score: 7 reviews	the capacitor for the hud..

11-02-2007, 09:05 AM	#10
posdriftin Zilvia Addict Join Date: Apr 2007 Location: so cal...north ..sd... Posts: 832 Trader Rating: (7) Feedback Score: 7 reviews	i have tried two diff clusters. on the dimmer the black has ground i don't think the other red wire has power. the cluster is getting power because if i ground the other side of the light they all light up. when the key is on on behind tach is on and when i turn lights on it goes off.