SS clutch lines and drift buttons!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*NemeGuero* · 10-31-2007, 06:29 PM

Does someone make a complete SS clutch line that replaces the hardline and the soft line? (I deleted the damper box so I don't care about that ish)

or does someone know what end fittings to use so I can just make one?

and secondly... who has a drift button and wants to give me measurements?

Inner and outer Diameters and length.

And before anyone says anything, I have free access to a machine shop and free aluminum stock so its free to make for me.

k's_silvia2.0 · 10-31-2007, 06:31 PM

i can measure tonight but hook it up with a Neme prototype.

JesusFreakDrifter · 10-31-2007, 06:32 PM

i've seen some ss hardlines only sold on ebay with a master cylinder, i know of someone with that setup on an rx7, no probs yet

*NemeGuero* · 10-31-2007, 06:32 PM

f'sho!!

you get me those measurements and I'll make you one free. Just pay chipping.

Quote:

Originally Posted by JesusFreakDrifter

i've seen some ss hardlines only sold on ebay with a master cylinder, i know of someone with that setup on an rx7, no probs yet

what? I want to know where I can buy a SS clutch line.. not a replacement hardline.

MegasquirtCA · 10-31-2007, 06:33 PM

can you make me a Vacuum log with 6 1/8 NPT ports. Heres the page for taka.

http://takamotorsports.com/ProductClutchLines_page.html

k's_silvia2.0 · 10-31-2007, 06:33 PM

Ill measure my E-brake button.

*NemeGuero* · 10-31-2007, 06:34 PM

Quote:

Originally Posted by MegasquirtCA

can you make me a Vacuum log with 6 1/8 NPT ports. Heres the page for taka.

http://takamotorsports.com/ProductClutchLines_page.html

Thanks for the link!

PM me some more details on what you want made and maybe we can work somefin' out.

MegasquirtCA · 10-31-2007, 06:37 PM

Vacuum log/manifold pretty much just a rectangle with holes drilled.

Cheapest I found was from Voodoo for $25 for 6 ports and $21.95 for 4 ports.

Bubba · 10-31-2007, 06:43 PM

Enjuku has a hardline replacement. It looks like a SS clutch line but longer, just hook it to your current line and bam. They sell both. Master to loop, and loop to slave. $40 bux each. Look it up.

*NemeGuero* · 10-31-2007, 06:44 PM

Quote:

Originally Posted by bubbablak

Enjuku has a hardline replacement. It looks like a SS clutch line but longer, just hook it to your current line and bam. They sell both. Master to loop, and loop to slave. $40 bux each. Look it up.

taka has them for $65 for the complete I think.

Dream240 · 11-01-2007, 10:36 AM

Quote:

Originally Posted by NemeGuero

taka has them for $65 for the complete I think.

dammit, I bought mine about a year ago, for 80. Oh well. Works great though, you have more than enough line so that you can move the slave around when you need to. There's no tightness in the line at all.

unicoladron · 11-01-2007, 10:38 AM

yes, you should definitely get both of the lines. they work perfect.

*NemeGuero* · 10-31-2007, 06:43 PM

Dunno if there are drill bits long enough to go all the way through the block.
Cut away looks like this, right?

MegasquirtCA · 10-31-2007, 06:45 PM

Yup exactly like that.

Yea the Taka one says MC to SC. Im sure you can build one for a lot cheaper. The shop I go to would probably do it for $25-$33 I just dont know the thread pitch.

*NemeGuero* · 10-31-2007, 06:47 PM

I'll spend the extra money on not having to build it myself. haha $65 aint bad.

If I have the 6 1/8 taps at the machine shop I'll do it.

MegasquirtCA · 10-31-2007, 06:50 PM

The holes on the end are 1/4 NPT, and the 6 holes are 1/8 NPT I dont really think I need 6 ports I could get away with 5.

*NemeGuero* · 10-31-2007, 06:56 PM

I'm gonna make it dildo shaped.. and it won't be painted. lol

MegasquirtCA · 10-31-2007, 07:15 PM

Quote:

Originally Posted by NemeGuero

I'm gonna make it dildo shaped.. and it won't be painted. lol

LOL good thing I start powdercoated last month.

blownmotor · 10-31-2007, 08:28 PM

just bend the stock line straight to slaveand replace the rubber line one to ss

*NemeGuero* · 10-31-2007, 10:58 PM

Quote:

Originally Posted by blownmotor

just bend the stock line straight to slaveand replace the rubber line one to ss

Wtf are you talking about?
did you read the thread?

I want a SS line to replace the stock hardline.. I already eliminated my damper box.

and I found one on Taka. So STFU

blownmotor · 10-31-2007, 11:08 PM

fucking pointless to get a ss line when stock hard lines already do their job and the hard lines are already mounted in place and you're changing it to ss line because why your dumbass the likes to have some clutch line flopping around when the stock lines are perfectly fine

*NemeGuero* · 10-31-2007, 11:50 PM

Quote:

Originally Posted by blownmotor

fucking pointless to get a ss line when stock hard lines already do their job and the hard lines are already mounted in place and you're changing it to ss line because why your dumbass the likes to have some clutch line flopping around when the stock lines are perfectly fine

No FUCKTARD. I'm replacing the line to eliminate it as a suspect for air leaks.

and it only flops around if you do half-ass work. All it takes is a simple ziptie or 2.

vvtisupra · 11-01-2007, 12:08 AM

refer: http://www.zilvia.net/f/showthread.php?t=157659

Healtoeae86 is the guy to talk to. He can make anything. If you want he can make it out of nomex lines at 25+ bucks a ft if you really wanna be gangster.

*NemeGuero* · 11-01-2007, 09:29 AM

Quote:

Originally Posted by vvtisupra

refer: http://www.zilvia.net/f/showthread.php?t=157659

Healtoeae86 is the guy to talk to. He can make anything. If you want he can make it out of nomex lines at 25+ bucks a ft if you really wanna be gangster.

sweet. I'll hit him up.

vvtisupra · 11-01-2007, 09:22 PM

Quote:

Originally Posted by NemeGuero

sweet. I'll hit him up.

just found out he is at SEMA so you might want to give him some time

*downshift_sideways* · 11-01-2007, 12:14 AM

Quote:

Originally Posted by blownmotor

fucking pointless to get a ss line when stock hard lines already do their job and the hard lines are already mounted in place and you're changing it to ss line because why your dumbass the likes to have some clutch line flopping around when the stock lines are perfectly fine

Your lucky I spread to much rep today....FAG

Rayne · 11-01-2007, 02:25 AM

I bought an Earl's replacement clutch line from FRSport.com for $41.64 shipped.

Earls Stainless Steel Clutch Line

unicoladron · 11-01-2007, 07:24 AM

Neme,

Agency power makes a really nice braided line that is wrapped in some black plastic protective shit. they make a long line for "AT to MT" conversions and a short line that is probably for people who eliminate the dampener box. i actually accidentially bought both of them,and it worked out great and it's the perfect length when using both.

short line:
http://www.agency-power.com/catalog/...roducts_id/131

long line:
http://www.agency-power.com/catalog/...roducts_id/171

*NemeGuero* · 11-01-2007, 09:27 AM

Quote:

Originally Posted by Rayne

I bought an Earl's replacement clutch line from FRSport.com for $41.64 shipped.

Earls Stainless Steel Clutch Line

Thats just the short line.

Quote:

Originally Posted by unicoladron

Neme,

Agency power makes a really nice braided line that is wrapped in some black plastic protective shit. they make a long line for "AT to MT" conversions and a short line that is probably for people who eliminate the dampener box. i actually accidentially bought both of them,and it worked out great and it's the perfect length when using both.

short line:
http://www.agency-power.com/catalog/...roducts_id/131

long line:
http://www.agency-power.com/catalog/...roducts_id/171

so I'd need both then?

Rayne · 11-01-2007, 09:57 AM

Quote:

Originally Posted by NemeGuero

Thats just the short line.

Well I guess that is what I get for being too tired when I sent in the order. No big deal...I know a pick and pull I can get the stock hard line from. I guess I will up grade later.

10-31-2007, 06:29 PM	#1
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	SS clutch lines and drift buttons!! Does someone make a complete SS clutch line that replaces the hardline and the soft line? (I deleted the damper box so I don't care about that ish) or does someone know what end fittings to use so I can just make one? and secondly... who has a drift button and wants to give me measurements? Inner and outer Diameters and length. And before anyone says anything, I have free access to a machine shop and free aluminum stock so its free to make for me. __________________

10-31-2007, 06:31 PM	#2
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 38 Posts: 5,111 Trader Rating: (17) Feedback Score: 17 reviews	i can measure tonight but hook it up with a Neme prototype. __________________

10-31-2007, 06:33 PM	#6
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 38 Posts: 5,111 Trader Rating: (17) Feedback Score: 17 reviews	Ill measure my E-brake button. __________________

10-31-2007, 06:43 PM	#9
Bubba Zilvia Junkie Join Date: Feb 2006 Location: Biloxi, MS Age: 41 Posts: 352 Trader Rating: (2) Feedback Score: 2 reviews	Enjuku has a hardline replacement. It looks like a SS clutch line but longer, just hook it to your current line and bam. They sell both. Master to loop, and loop to slave. $40 bux each. Look it up. __________________ Good at wrenching, terrible at electrical. Lord help me... HAHAHA

11-01-2007, 10:38 AM	#12
unicoladron Zilvia Junkie Join Date: Jul 2007 Location: Long Island, NY Age: 40 Posts: 568 Trader Rating: (0) Feedback Score: 0 reviews	yes, you should definitely get both of the lines. they work perfect. __________________ 1993 KA24DE for sale with 180k..running when pulled.... need to get rid of ASAP...i'm moving

10-31-2007, 06:32 PM	#3
JesusFreakDrifter Zilvia Addict Join Date: Jan 2006 Location: fort lauderdale Posts: 975 Trader Rating: (0) Feedback Score: 0 reviews	i've seen some ss hardlines only sold on ebay with a master cylinder, i know of someone with that setup on an rx7, no probs yet

10-31-2007, 06:33 PM	#5
MegasquirtCA Zilvia Addict Join Date: May 2006 Location: South Florida Posts: 610 Trader Rating: (3) Feedback Score: 3 reviews	can you make me a Vacuum log with 6 1/8 NPT ports. Heres the page for taka. http://takamotorsports.com/ProductClutchLines_page.html

10-31-2007, 06:37 PM	#8
MegasquirtCA Zilvia Addict Join Date: May 2006 Location: South Florida Posts: 610 Trader Rating: (3) Feedback Score: 3 reviews	Vacuum log/manifold pretty much just a rectangle with holes drilled. Cheapest I found was from Voodoo for $25 for 6 ports and $21.95 for 4 ports.

10-31-2007, 06:45 PM	#14
MegasquirtCA Zilvia Addict Join Date: May 2006 Location: South Florida Posts: 610 Trader Rating: (3) Feedback Score: 3 reviews	Yup exactly like that. Yea the Taka one says MC to SC. Im sure you can build one for a lot cheaper. The shop I go to would probably do it for $25-$33 I just dont know the thread pitch.

10-31-2007, 06:47 PM	#15
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	I'll spend the extra money on not having to build it myself. haha $65 aint bad. If I have the 6 1/8 taps at the machine shop I'll do it. __________________

10-31-2007, 06:50 PM	#16
MegasquirtCA Zilvia Addict Join Date: May 2006 Location: South Florida Posts: 610 Trader Rating: (3) Feedback Score: 3 reviews	The holes on the end are 1/4 NPT, and the 6 holes are 1/8 NPT I dont really think I need 6 ports I could get away with 5.

10-31-2007, 06:56 PM	#17
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	I'm gonna make it dildo shaped.. and it won't be painted. lol __________________

10-31-2007, 08:28 PM	#19
blownmotor Zilvia Junkie Join Date: May 2006 Location: land of the sideshows Posts: 402 Trader Rating: (0) Feedback Score: 0 reviews	just bend the stock line straight to slaveand replace the rubber line one to ss

10-31-2007, 11:08 PM	#21
blownmotor Zilvia Junkie Join Date: May 2006 Location: land of the sideshows Posts: 402 Trader Rating: (0) Feedback Score: 0 reviews	fucking pointless to get a ss line when stock hard lines already do their job and the hard lines are already mounted in place and you're changing it to ss line because why your dumbass the likes to have some clutch line flopping around when the stock lines are perfectly fine

11-01-2007, 12:08 AM	#23
vvtisupra Nissanaholic! Join Date: Apr 2004 Location: SB and OC Posts: 2,118 Trader Rating: (16) Feedback Score: 16 reviews	refer: http://www.zilvia.net/f/showthread.php?t=157659 Healtoeae86 is the guy to talk to. He can make anything. If you want he can make it out of nomex lines at 25+ bucks a ft if you really wanna be gangster. __________________ http://www.fuckdrama.com/

11-01-2007, 02:25 AM	#27
Rayne Zilvia Addict Join Date: Feb 2005 Location: Earth Posts: 676 Trader Rating: (0) Rides Gallery: Rayne Feedback Score: 0 reviews	I bought an Earl's replacement clutch line from FRSport.com for $41.64 shipped. Earls Stainless Steel Clutch Line __________________ Do need the Factory Service Manual? Click here.

11-01-2007, 07:24 AM	#28
unicoladron Zilvia Junkie Join Date: Jul 2007 Location: Long Island, NY Age: 40 Posts: 568 Trader Rating: (0) Feedback Score: 0 reviews	Neme, Agency power makes a really nice braided line that is wrapped in some black plastic protective shit. they make a long line for "AT to MT" conversions and a short line that is probably for people who eliminate the dampener box. i actually accidentially bought both of them,and it worked out great and it's the perfect length when using both. short line: http://www.agency-power.com/catalog/...roducts_id/131 long line: http://www.agency-power.com/catalog/...roducts_id/171 __________________ 1993 KA24DE for sale with 180k..running when pulled.... need to get rid of ASAP...i'm moving