S14 Sr20det A/C problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ohnobigtdawg · 11-05-2007, 08:33 PM

I have a 95 240sx. I just got my a/c lines made for my s14 SR. After I finished installing the lines and the belt. I tried to turn on the a/c to test if the compressor would kick in, but it didn't. My a/c has not been recharged yet. Can that be the problem? Or is it wiring? If its the wiring which wire on the f4 plug is it?
I also notice I have two A/C wire plug in my car one comes from the SR engine harness located on the passenger side and the other is the original one that came from factory located on the driver side. The plug from the SR engine harness needs to be extended to the driver side in order for it to be plugged in to the compressor. I am currently using the one that came with the car. Which wire am i suppose to plug in??
Thanks

Z U L8R · 11-06-2007, 08:15 AM

yes. vacuum down the system, then charge it to the correct hi and low side pressures, then see if the compressor kicks on. we'll worry about the wiring once you have the freon in it.

ohnobigtdawg · 11-06-2007, 02:06 PM

Thanks. Z U LR

bRUt@L`S13 · 11-06-2007, 02:15 PM

ya recharge it bro

or just take that shit off and gain hp ^_-

11-05-2007, 08:33 PM	#1
ohnobigtdawg Zilvia Junkie Join Date: Nov 2004 Location: Cerritos CA Posts: 423 Trader Rating: (0) Feedback Score: 0 reviews	S14 Sr20det A/C problem HELP!! I have a 95 240sx. I just got my a/c lines made for my s14 SR. After I finished installing the lines and the belt. I tried to turn on the a/c to test if the compressor would kick in, but it didn't. My a/c has not been recharged yet. Can that be the problem? Or is it wiring? If its the wiring which wire on the f4 plug is it? I also notice I have two A/C wire plug in my car one comes from the SR engine harness located on the passenger side and the other is the original one that came from factory located on the driver side. The plug from the SR engine harness needs to be extended to the driver side in order for it to be plugged in to the compressor. I am currently using the one that came with the car. Which wire am i suppose to plug in?? Thanks __________________ MR. Pibb + Red Vines = Crazy Delicious You can call us Arron Burr by the way we droppin Hamiltons! Last edited by ohnobigtdawg; 11-06-2007 at 12:48 AM..

11-06-2007, 08:15 AM	#2
Z U L8R Zilvia FREAK! Join Date: Jan 2007 Location: Georgia Age: 43 Posts: 1,194 Trader Rating: (0) Feedback Score: 0 reviews	yes. vacuum down the system, then charge it to the correct hi and low side pressures, then see if the compressor kicks on. we'll worry about the wiring once you have the freon in it. __________________ RB25 280z GT30/76R 441hp/381tq 11.9@125

11-06-2007, 02:06 PM	#3
ohnobigtdawg Zilvia Junkie Join Date: Nov 2004 Location: Cerritos CA Posts: 423 Trader Rating: (0) Feedback Score: 0 reviews	Thanks. Z U LR __________________ MR. Pibb + Red Vines = Crazy Delicious You can call us Arron Burr by the way we droppin Hamiltons!

11-06-2007, 02:15 PM	#4
bRUt@L`S13 BANNED Join Date: Oct 2007 Location: So Cal Age: 35 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	ya recharge it bro or just take that shit off and gain hp ^_-