What are you guys using as a air intake hose? Pipe? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Captain_Ron80 · 11-11-2007, 09:18 PM

SR20 is installed. I have no stock piece to go between the MAF and the turbo inlet. So I need some "S" shape hose or pipe. Please give me your experience on what you did. Links would be good! Thanks a mil!
Captain Ron

JDMClifford · 11-11-2007, 10:34 PM

used my stock one... you could always buy one. i have a cupple luying around. or you could use 3 inch tubing.

zaquanh · 11-11-2007, 10:44 PM

go u to auto zone they have have a wierd one , get that for the time being

unicoladron · 11-12-2007, 12:24 PM

Quote:

Originally Posted by zaquanh

go u to auto zone they have have a wierd one , get that for the time being

umm if one were to go to autozone to purchase a part that you can find only on JDM engine, how would one go about doing so?

Captain_Ron80 · 11-12-2007, 11:04 AM

Some one posted this link on another forum. It is exactly what I was looking for. Just thought that I would post it in case someone else had the same question. Thanks for you input!

http://pipingpro.com/shop/prod...d=150

Captain Ron

EAS13 · 11-12-2007, 03:00 PM

Quote:

Originally Posted by Captain_Ron80

Some one posted this link on another forum. It is exactly what I was looking for. Just thought that I would post it in case someone else had the same question. Thanks for you input!

http://pipingpro.com/shop/prod...d=150

Captain Ron

Here, fixed your link

http://pipingpro.com/shop/product_in...roducts_id=150

Also, confirm with them if it comes with couplers (probably not).

Pepperoni · 11-12-2007, 03:03 PM

Yes it comes with couplers/clamps.

max_POWER u have PM

EDIT:
And just so you fellow Zilvians know, there is going to be a group buy for these very soon. I think it will be for T25 intakes and for the GT2871R intakes. And as far as I know, once the GB is up, there is absolutely no fabrication wait time.

Captain_Ron80 · 11-12-2007, 05:28 PM

Quote:

Originally Posted by Pepperoni

Yes it comes with couplers/clamps.

max_POWER u have PM

EDIT:
And just so you fellow Zilvians know, there is going to be a group buy for these very soon. I think it will be for T25 intakes and for the GT2871R intakes. And as far as I know, once the GB is up, there is absolutely no fabrication wait time.

How soon Mr. Pepperoni? I am going to be ordering this soon for this is my final part to install.

Captain Ron

max_POWER · 11-12-2007, 12:14 PM

good luck dealing with those idiots.
ive sent at least 4 emails for prices/orders and not one response!

Captain_Ron80 · 11-12-2007, 12:46 PM

Quote:

Originally Posted by max_POWER

good luck dealing with those idiots.
ive sent at least 4 emails for prices/orders and not one response!

You tried calling?

Actually... couldn't find a phone # on their site.

Captain Ron

max_POWER · 11-12-2007, 01:42 PM

Quote:

Originally Posted by Captain_Ron80

You tried calling?

Actually... couldn't find a phone # on their site.

Captain Ron

ya if i could have found a phone number i would have just called them, but i guess it wasnt meant to be.
I dont understand how finding something so stupid like an intake is so freakin hard for these motors.
you either spend $200+ on some BS aluminum pipe with a brand name on it or use the stock rubber crap.

LAME

Z U L8R · 11-12-2007, 01:11 PM

4" alumineeyumized steal + tig welds ftw!

actually at lowes....there's this shit kinda like dryer hose....except tougher...there's 2 kinds. there's kind that you can cut with a razor blade, and there's kinds you can't cut unless you use a ziz wheel. the latter is better but the first kind ain't too shabby if you keep it bunched up
gl
Dave =]

statik · 11-12-2007, 02:21 PM

my first intake i just bought a CAI for some eclipse off ebay for like $20 that had the right bends in it and cut it up, worked good but i wanted a bung for the valve cover so i got one from piping pro back when he was still selling them, im pretty sure they are too busy to handle any orders right now.

max_POWER · 11-12-2007, 06:47 PM

pepperoni FTW!
thanks for the PM man!

Captain_Ron80 · 11-12-2007, 07:42 PM

Is pepperoni a piping pro rep?

statik · 11-12-2007, 07:52 PM

Quote:

Originally Posted by Captain_Ron80

Is pepperoni a piping pro rep?

he basically is piping pro haha

Pepperoni · 11-12-2007, 08:00 PM

Lol, its not just me anymore

although we need more people we can trust

You got PM captain

hayai_240 · 11-12-2007, 08:06 PM

Are you going to be offering a special for those w/ a T28 turbo also? If so, i'd purchase one. I'd also like to add the catch can flange and recirc-flange.

Pepperoni · 11-12-2007, 10:20 PM

Quote:

Originally Posted by hayai_240

Are you going to be offering a special for those w/ a T28 turbo also? If so, i'd purchase one. I'd also like to add the catch can flange and recirc-flange.

T28 idea is still up in the air. Certainly can include them in the Group Buy if there's enough demand. As it stands, theres way more people asking for T25 intakes than T28. However, the group buy will most likely only have intakes with catch can bung on them, no BOV bung. The focus is to have all intakes ready to ship with 0 wait time once the GB is up, since that is the top concern from most people.

And to answer the previous question, group buy will probably be posted in about a week. You can PM me if you want me to let you know it's up so you dont miss it.

O and hayai_240, u have a PM

Captain_Ron80 · 11-20-2007, 02:34 PM

Please update when you can Pepperoni.

Captain Ron

11-11-2007, 09:18 PM	#1
Captain_Ron80 Leaky Injector Join Date: Sep 2007 Location: Portland Age: 45 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	What are you guys using as a air intake hose? Pipe? SR20 is installed. I have no stock piece to go between the MAF and the turbo inlet. So I need some "S" shape hose or pipe. Please give me your experience on what you did. Links would be good! Thanks a mil! Captain Ron

11-11-2007, 10:34 PM	#2
JDMClifford Zilvia Junkie Join Date: Nov 2006 Location: Santa Cruz Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	used my stock one... you could always buy one. i have a cupple luying around. or you could use 3 inch tubing. __________________ Parking lot pimping

11-12-2007, 01:11 PM	#12
Z U L8R Zilvia FREAK! Join Date: Jan 2007 Location: Georgia Age: 43 Posts: 1,194 Trader Rating: (0) Feedback Score: 0 reviews	4" alumineeyumized steal + tig welds ftw! actually at lowes....there's this shit kinda like dryer hose....except tougher...there's 2 kinds. there's kind that you can cut with a razor blade, and there's kinds you can't cut unless you use a ziz wheel. the latter is better but the first kind ain't too shabby if you keep it bunched up gl Dave =] __________________ RB25 280z GT30/76R 441hp/381tq 11.9@125

11-12-2007, 02:21 PM	#13
statik Zilvia FREAK! Join Date: Oct 2003 Location: Long Island, NY Age: 40 Posts: 1,358 Trader Rating: (0) Rides Gallery: statik Feedback Score: 0 reviews	my first intake i just bought a CAI for some eclipse off ebay for like $20 that had the right bends in it and cut it up, worked good but i wanted a bung for the valve cover so i got one from piping pro back when he was still selling them, im pretty sure they are too busy to handle any orders right now. __________________ 97 240sx esaarr \| Current Status: SOLD

11-11-2007, 10:44 PM	#3
zaquanh Zilvia FREAK! Join Date: Feb 2007 Location: san antonio Posts: 1,073 Trader Rating: (3) Feedback Score: 3 reviews	go u to auto zone they have have a wierd one , get that for the time being

11-12-2007, 11:04 AM	#5
Captain_Ron80 Leaky Injector Join Date: Sep 2007 Location: Portland Age: 45 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	Some one posted this link on another forum. It is exactly what I was looking for. Just thought that I would post it in case someone else had the same question. Thanks for you input! http://pipingpro.com/shop/prod...d=150 Captain Ron

11-12-2007, 03:03 PM	#7
Pepperoni Zilvia Addict Join Date: Jun 2003 Location: norcal Posts: 750 Trader Rating: (0) Feedback Score: 0 reviews	Yes it comes with couplers/clamps. max_POWER u have PM EDIT: And just so you fellow Zilvians know, there is going to be a group buy for these very soon. I think it will be for T25 intakes and for the GT2871R intakes. And as far as I know, once the GB is up, there is absolutely no fabrication wait time.

11-12-2007, 12:14 PM	#9
max_POWER Join Date: Jul 2007 Location: houston Age: 40 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	good luck dealing with those idiots. ive sent at least 4 emails for prices/orders and not one response!

11-12-2007, 06:47 PM	#14
max_POWER Join Date: Jul 2007 Location: houston Age: 40 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	pepperoni FTW! thanks for the PM man!

11-12-2007, 07:42 PM	#15
Captain_Ron80 Leaky Injector Join Date: Sep 2007 Location: Portland Age: 45 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	Is pepperoni a piping pro rep?

11-12-2007, 08:00 PM	#17
Pepperoni Zilvia Addict Join Date: Jun 2003 Location: norcal Posts: 750 Trader Rating: (0) Feedback Score: 0 reviews	Lol, its not just me anymore although we need more people we can trust You got PM captain

11-12-2007, 08:06 PM	#18
hayai_240 Leaky Injector Join Date: Jul 2006 Location: Seattle Posts: 142 Trader Rating: (2) Feedback Score: 2 reviews	Are you going to be offering a special for those w/ a T28 turbo also? If so, i'd purchase one. I'd also like to add the catch can flange and recirc-flange.

11-20-2007, 02:34 PM	#20
Captain_Ron80 Leaky Injector Join Date: Sep 2007 Location: Portland Age: 45 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	Please update when you can Pepperoni. Captain Ron